Mercurial > hg > CbC > CbC_gcc
annotate gcc/config/pa/pa.h @ 55:77e2b8dfacca gcc-4.4.5
update it from 4.4.3 to 4.5.0
author | ryoma <e075725@ie.u-ryukyu.ac.jp> |
---|---|
date | Fri, 12 Feb 2010 23:39:51 +0900 |
parents | a06113de4d67 |
children | f6334be47118 |
rev | line source |
---|---|
0 | 1 /* Definitions of target machine for GNU compiler, for the HP Spectrum. |
2 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, | |
55
77e2b8dfacca
update it from 4.4.3 to 4.5.0
ryoma <e075725@ie.u-ryukyu.ac.jp>
parents:
0
diff
changeset
|
3 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 |
77e2b8dfacca
update it from 4.4.3 to 4.5.0
ryoma <e075725@ie.u-ryukyu.ac.jp>
parents:
0
diff
changeset
|
4 Free Software Foundation, Inc. |
0 | 5 Contributed by Michael Tiemann (tiemann@cygnus.com) of Cygnus Support |
6 and Tim Moore (moore@defmacro.cs.utah.edu) of the Center for | |
7 Software Science at the University of Utah. | |
8 | |
9 This file is part of GCC. | |
10 | |
11 GCC is free software; you can redistribute it and/or modify | |
12 it under the terms of the GNU General Public License as published by | |
13 the Free Software Foundation; either version 3, or (at your option) | |
14 any later version. | |
15 | |
16 GCC is distributed in the hope that it will be useful, | |
17 but WITHOUT ANY WARRANTY; without even the implied warranty of | |
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
19 GNU General Public License for more details. | |
20 | |
21 You should have received a copy of the GNU General Public License | |
22 along with GCC; see the file COPYING3. If not see | |
23 <http://www.gnu.org/licenses/>. */ | |
24 | |
25 /* For long call handling. */ | |
26 extern unsigned long total_code_bytes; | |
27 | |
28 /* Which processor to schedule for. */ | |
29 | |
30 enum processor_type | |
31 { | |
32 PROCESSOR_700, | |
33 PROCESSOR_7100, | |
34 PROCESSOR_7100LC, | |
35 PROCESSOR_7200, | |
36 PROCESSOR_7300, | |
37 PROCESSOR_8000 | |
38 }; | |
39 | |
40 /* For -mschedule= option. */ | |
41 extern enum processor_type pa_cpu; | |
42 | |
43 /* For -munix= option. */ | |
44 extern int flag_pa_unix; | |
45 | |
46 #define pa_cpu_attr ((enum attr_cpu)pa_cpu) | |
47 | |
48 /* Print subsidiary information on the compiler version in use. */ | |
49 | |
50 #define TARGET_VERSION fputs (" (hppa)", stderr); | |
51 | |
52 #define TARGET_PA_10 (!TARGET_PA_11 && !TARGET_PA_20) | |
53 | |
54 /* Generate code for the HPPA 2.0 architecture in 64bit mode. */ | |
55 #ifndef TARGET_64BIT | |
56 #define TARGET_64BIT 0 | |
57 #endif | |
58 | |
59 /* Generate code for ELF32 ABI. */ | |
60 #ifndef TARGET_ELF32 | |
61 #define TARGET_ELF32 0 | |
62 #endif | |
63 | |
64 /* Generate code for SOM 32bit ABI. */ | |
65 #ifndef TARGET_SOM | |
66 #define TARGET_SOM 0 | |
67 #endif | |
68 | |
69 /* HP-UX UNIX features. */ | |
70 #ifndef TARGET_HPUX | |
71 #define TARGET_HPUX 0 | |
72 #endif | |
73 | |
74 /* HP-UX 10.10 UNIX 95 features. */ | |
75 #ifndef TARGET_HPUX_10_10 | |
76 #define TARGET_HPUX_10_10 0 | |
77 #endif | |
78 | |
79 /* HP-UX 11.* features (11.00, 11.11, 11.23, etc.) */ | |
80 #ifndef TARGET_HPUX_11 | |
81 #define TARGET_HPUX_11 0 | |
82 #endif | |
83 | |
84 /* HP-UX 11i multibyte and UNIX 98 extensions. */ | |
85 #ifndef TARGET_HPUX_11_11 | |
86 #define TARGET_HPUX_11_11 0 | |
87 #endif | |
88 | |
89 /* The following three defines are potential target switches. The current | |
90 defines are optimal given the current capabilities of GAS and GNU ld. */ | |
91 | |
92 /* Define to a C expression evaluating to true to use long absolute calls. | |
93 Currently, only the HP assembler and SOM linker support long absolute | |
94 calls. They are used only in non-pic code. */ | |
95 #define TARGET_LONG_ABS_CALL (TARGET_SOM && !TARGET_GAS) | |
96 | |
97 /* Define to a C expression evaluating to true to use long PIC symbol | |
98 difference calls. Long PIC symbol difference calls are only used with | |
99 the HP assembler and linker. The HP assembler detects this instruction | |
100 sequence and treats it as long pc-relative call. Currently, GAS only | |
101 allows a difference of two symbols in the same subspace, and it doesn't | |
102 detect the sequence as a pc-relative call. */ | |
103 #define TARGET_LONG_PIC_SDIFF_CALL (!TARGET_GAS && TARGET_HPUX) | |
104 | |
105 /* Define to a C expression evaluating to true to use long PIC | |
106 pc-relative calls. Long PIC pc-relative calls are only used with | |
107 GAS. Currently, they are usable for calls which bind local to a | |
108 module but not for external calls. */ | |
109 #define TARGET_LONG_PIC_PCREL_CALL 0 | |
110 | |
111 /* Define to a C expression evaluating to true to use SOM secondary | |
112 definition symbols for weak support. Linker support for secondary | |
113 definition symbols is buggy prior to HP-UX 11.X. */ | |
114 #define TARGET_SOM_SDEF 0 | |
115 | |
116 /* Define to a C expression evaluating to true to save the entry value | |
117 of SP in the current frame marker. This is normally unnecessary. | |
118 However, the HP-UX unwind library looks at the SAVE_SP callinfo flag. | |
119 HP compilers don't use this flag but it is supported by the assembler. | |
120 We set this flag to indicate that register %r3 has been saved at the | |
121 start of the frame. Thus, when the HP unwind library is used, we | |
122 need to generate additional code to save SP into the frame marker. */ | |
123 #define TARGET_HPUX_UNWIND_LIBRARY 0 | |
124 | |
125 #ifndef TARGET_DEFAULT | |
126 #define TARGET_DEFAULT (MASK_GAS | MASK_JUMP_IN_DELAY | MASK_BIG_SWITCH) | |
127 #endif | |
128 | |
129 #ifndef TARGET_CPU_DEFAULT | |
130 #define TARGET_CPU_DEFAULT 0 | |
131 #endif | |
132 | |
133 #ifndef TARGET_SCHED_DEFAULT | |
134 #define TARGET_SCHED_DEFAULT PROCESSOR_8000 | |
135 #endif | |
136 | |
137 /* Support for a compile-time default CPU, et cetera. The rules are: | |
138 --with-schedule is ignored if -mschedule is specified. | |
139 --with-arch is ignored if -march is specified. */ | |
140 #define OPTION_DEFAULT_SPECS \ | |
141 {"arch", "%{!march=*:-march=%(VALUE)}" }, \ | |
142 {"schedule", "%{!mschedule=*:-mschedule=%(VALUE)}" } | |
143 | |
144 /* Specify the dialect of assembler to use. New mnemonics is dialect one | |
145 and the old mnemonics are dialect zero. */ | |
146 #define ASSEMBLER_DIALECT (TARGET_PA_20 ? 1 : 0) | |
147 | |
148 #define OVERRIDE_OPTIONS override_options () | |
149 | |
150 /* Override some settings from dbxelf.h. */ | |
151 | |
152 /* We do not have to be compatible with dbx, so we enable gdb extensions | |
153 by default. */ | |
154 #define DEFAULT_GDB_EXTENSIONS 1 | |
155 | |
156 /* This used to be zero (no max length), but big enums and such can | |
157 cause huge strings which killed gas. | |
158 | |
159 We also have to avoid lossage in dbxout.c -- it does not compute the | |
160 string size accurately, so we are real conservative here. */ | |
161 #undef DBX_CONTIN_LENGTH | |
162 #define DBX_CONTIN_LENGTH 3000 | |
163 | |
164 /* GDB always assumes the current function's frame begins at the value | |
165 of the stack pointer upon entry to the current function. Accessing | |
166 local variables and parameters passed on the stack is done using the | |
167 base of the frame + an offset provided by GCC. | |
168 | |
169 For functions which have frame pointers this method works fine; | |
170 the (frame pointer) == (stack pointer at function entry) and GCC provides | |
171 an offset relative to the frame pointer. | |
172 | |
173 This loses for functions without a frame pointer; GCC provides an offset | |
174 which is relative to the stack pointer after adjusting for the function's | |
175 frame size. GDB would prefer the offset to be relative to the value of | |
176 the stack pointer at the function's entry. Yuk! */ | |
177 #define DEBUGGER_AUTO_OFFSET(X) \ | |
178 ((GET_CODE (X) == PLUS ? INTVAL (XEXP (X, 1)) : 0) \ | |
179 + (frame_pointer_needed ? 0 : compute_frame_size (get_frame_size (), 0))) | |
180 | |
181 #define DEBUGGER_ARG_OFFSET(OFFSET, X) \ | |
182 ((GET_CODE (X) == PLUS ? OFFSET : 0) \ | |
183 + (frame_pointer_needed ? 0 : compute_frame_size (get_frame_size (), 0))) | |
184 | |
185 #define TARGET_CPU_CPP_BUILTINS() \ | |
186 do { \ | |
187 builtin_assert("cpu=hppa"); \ | |
188 builtin_assert("machine=hppa"); \ | |
189 builtin_define("__hppa"); \ | |
190 builtin_define("__hppa__"); \ | |
191 if (TARGET_PA_20) \ | |
192 builtin_define("_PA_RISC2_0"); \ | |
193 else if (TARGET_PA_11) \ | |
194 builtin_define("_PA_RISC1_1"); \ | |
195 else \ | |
196 builtin_define("_PA_RISC1_0"); \ | |
197 } while (0) | |
198 | |
199 /* An old set of OS defines for various BSD-like systems. */ | |
200 #define TARGET_OS_CPP_BUILTINS() \ | |
201 do \ | |
202 { \ | |
203 builtin_define_std ("REVARGV"); \ | |
204 builtin_define_std ("hp800"); \ | |
205 builtin_define_std ("hp9000"); \ | |
206 builtin_define_std ("hp9k8"); \ | |
207 if (!c_dialect_cxx () && !flag_iso) \ | |
208 builtin_define ("hppa"); \ | |
209 builtin_define_std ("spectrum"); \ | |
210 builtin_define_std ("unix"); \ | |
211 builtin_assert ("system=bsd"); \ | |
212 builtin_assert ("system=unix"); \ | |
213 } \ | |
214 while (0) | |
215 | |
216 #define CC1_SPEC "%{pg:} %{p:}" | |
217 | |
218 #define LINK_SPEC "%{mlinker-opt:-O} %{!shared:-u main} %{shared:-b}" | |
219 | |
220 /* We don't want -lg. */ | |
221 #ifndef LIB_SPEC | |
222 #define LIB_SPEC "%{!p:%{!pg:-lc}}%{p:-lc_p}%{pg:-lc_p}" | |
223 #endif | |
224 | |
225 /* This macro defines command-line switches that modify the default | |
226 target name. | |
227 | |
228 The definition is be an initializer for an array of structures. Each | |
229 array element has have three elements: the switch name, one of the | |
230 enumeration codes ADD or DELETE to indicate whether the string should be | |
231 inserted or deleted, and the string to be inserted or deleted. */ | |
232 #define MODIFY_TARGET_NAME {{"-32", DELETE, "64"}, {"-64", ADD, "64"}} | |
233 | |
234 /* Make gcc agree with <machine/ansi.h> */ | |
235 | |
236 #define SIZE_TYPE "unsigned int" | |
237 #define PTRDIFF_TYPE "int" | |
238 #define WCHAR_TYPE "unsigned int" | |
239 #define WCHAR_TYPE_SIZE 32 | |
240 | |
241 /* Show we can debug even without a frame pointer. */ | |
242 #define CAN_DEBUG_WITHOUT_FP | |
243 | |
244 /* target machine storage layout */ | |
55
77e2b8dfacca
update it from 4.4.3 to 4.5.0
ryoma <e075725@ie.u-ryukyu.ac.jp>
parents:
0
diff
changeset
|
245 typedef struct GTY(()) machine_function |
0 | 246 { |
247 /* Flag indicating that a .NSUBSPA directive has been output for | |
248 this function. */ | |
249 int in_nsubspa; | |
250 } machine_function; | |
251 | |
252 /* Define this macro if it is advisable to hold scalars in registers | |
253 in a wider mode than that declared by the program. In such cases, | |
254 the value is constrained to be within the bounds of the declared | |
255 type, but kept valid in the wider mode. The signedness of the | |
256 extension may differ from that of the type. */ | |
257 | |
258 #define PROMOTE_MODE(MODE,UNSIGNEDP,TYPE) \ | |
259 if (GET_MODE_CLASS (MODE) == MODE_INT \ | |
260 && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \ | |
261 (MODE) = word_mode; | |
262 | |
263 /* Define this if most significant bit is lowest numbered | |
264 in instructions that operate on numbered bit-fields. */ | |
265 #define BITS_BIG_ENDIAN 1 | |
266 | |
267 /* Define this if most significant byte of a word is the lowest numbered. */ | |
268 /* That is true on the HP-PA. */ | |
269 #define BYTES_BIG_ENDIAN 1 | |
270 | |
271 /* Define this if most significant word of a multiword number is lowest | |
272 numbered. */ | |
273 #define WORDS_BIG_ENDIAN 1 | |
274 | |
275 #define MAX_BITS_PER_WORD 64 | |
276 | |
277 /* Width of a word, in units (bytes). */ | |
278 #define UNITS_PER_WORD (TARGET_64BIT ? 8 : 4) | |
279 | |
280 /* Minimum number of units in a word. If this is undefined, the default | |
281 is UNITS_PER_WORD. Otherwise, it is the constant value that is the | |
282 smallest value that UNITS_PER_WORD can have at run-time. | |
283 | |
284 FIXME: This needs to be 4 when TARGET_64BIT is true to suppress the | |
285 building of various TImode routines in libgcc. The HP runtime | |
286 specification doesn't provide the alignment requirements and calling | |
287 conventions for TImode variables. */ | |
288 #define MIN_UNITS_PER_WORD 4 | |
289 | |
290 /* The widest floating point format supported by the hardware. Note that | |
291 setting this influences some Ada floating point type sizes, currently | |
292 required for GNAT to operate properly. */ | |
293 #define WIDEST_HARDWARE_FP_SIZE 64 | |
294 | |
295 /* Allocation boundary (in *bits*) for storing arguments in argument list. */ | |
296 #define PARM_BOUNDARY BITS_PER_WORD | |
297 | |
298 /* Largest alignment required for any stack parameter, in bits. | |
299 Don't define this if it is equal to PARM_BOUNDARY */ | |
300 #define MAX_PARM_BOUNDARY BIGGEST_ALIGNMENT | |
301 | |
302 /* Boundary (in *bits*) on which stack pointer is always aligned; | |
303 certain optimizations in combine depend on this. | |
304 | |
305 The HP-UX runtime documents mandate 64-byte and 16-byte alignment for | |
306 the stack on the 32 and 64-bit ports, respectively. However, we | |
307 are only guaranteed that the stack is aligned to BIGGEST_ALIGNMENT | |
308 in main. Thus, we treat the former as the preferred alignment. */ | |
309 #define STACK_BOUNDARY BIGGEST_ALIGNMENT | |
310 #define PREFERRED_STACK_BOUNDARY (TARGET_64BIT ? 128 : 512) | |
311 | |
312 /* Allocation boundary (in *bits*) for the code of a function. */ | |
313 #define FUNCTION_BOUNDARY BITS_PER_WORD | |
314 | |
315 /* Alignment of field after `int : 0' in a structure. */ | |
316 #define EMPTY_FIELD_BOUNDARY 32 | |
317 | |
318 /* Every structure's size must be a multiple of this. */ | |
319 #define STRUCTURE_SIZE_BOUNDARY 8 | |
320 | |
321 /* A bit-field declared as `int' forces `int' alignment for the struct. */ | |
322 #define PCC_BITFIELD_TYPE_MATTERS 1 | |
323 | |
324 /* No data type wants to be aligned rounder than this. */ | |
325 #define BIGGEST_ALIGNMENT (2 * BITS_PER_WORD) | |
326 | |
327 /* Get around hp-ux assembler bug, and make strcpy of constants fast. */ | |
328 #define CONSTANT_ALIGNMENT(CODE, TYPEALIGN) \ | |
329 ((TYPEALIGN) < 32 ? 32 : (TYPEALIGN)) | |
330 | |
331 /* Make arrays of chars word-aligned for the same reasons. */ | |
332 #define DATA_ALIGNMENT(TYPE, ALIGN) \ | |
333 (TREE_CODE (TYPE) == ARRAY_TYPE \ | |
334 && TYPE_MODE (TREE_TYPE (TYPE)) == QImode \ | |
335 && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN)) | |
336 | |
337 /* Set this nonzero if move instructions will actually fail to work | |
338 when given unaligned data. */ | |
339 #define STRICT_ALIGNMENT 1 | |
340 | |
341 /* Value is 1 if it is a good idea to tie two pseudo registers | |
342 when one has mode MODE1 and one has mode MODE2. | |
343 If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2, | |
344 for any hard reg, then this must be 0 for correct output. */ | |
345 #define MODES_TIEABLE_P(MODE1, MODE2) \ | |
346 pa_modes_tieable_p (MODE1, MODE2) | |
347 | |
348 /* Specify the registers used for certain standard purposes. | |
349 The values of these macros are register numbers. */ | |
350 | |
351 /* The HP-PA pc isn't overloaded on a register that the compiler knows about. */ | |
352 /* #define PC_REGNUM */ | |
353 | |
354 /* Register to use for pushing function arguments. */ | |
355 #define STACK_POINTER_REGNUM 30 | |
356 | |
357 /* Base register for access to local variables of the function. */ | |
358 #define FRAME_POINTER_REGNUM 3 | |
359 | |
360 /* Don't allow hard registers to be renamed into r2 unless r2 | |
361 is already live or already being saved (due to eh). */ | |
362 | |
363 #define HARD_REGNO_RENAME_OK(OLD_REG, NEW_REG) \ | |
364 ((NEW_REG) != 2 || df_regs_ever_live_p (2) || crtl->calls_eh_return) | |
365 | |
366 /* C statement to store the difference between the frame pointer | |
367 and the stack pointer values immediately after the function prologue. | |
368 | |
369 Note, we always pretend that this is a leaf function because if | |
370 it's not, there's no point in trying to eliminate the | |
371 frame pointer. If it is a leaf function, we guessed right! */ | |
372 #define INITIAL_FRAME_POINTER_OFFSET(VAR) \ | |
373 do {(VAR) = - compute_frame_size (get_frame_size (), 0);} while (0) | |
374 | |
375 /* Base register for access to arguments of the function. */ | |
376 #define ARG_POINTER_REGNUM (TARGET_64BIT ? 29 : 3) | |
377 | |
378 /* Register in which static-chain is passed to a function. */ | |
379 #define STATIC_CHAIN_REGNUM (TARGET_64BIT ? 31 : 29) | |
380 | |
381 /* Register used to address the offset table for position-independent | |
382 data references. */ | |
383 #define PIC_OFFSET_TABLE_REGNUM \ | |
384 (flag_pic ? (TARGET_64BIT ? 27 : 19) : INVALID_REGNUM) | |
385 | |
386 #define PIC_OFFSET_TABLE_REG_CALL_CLOBBERED 1 | |
387 | |
388 /* Function to return the rtx used to save the pic offset table register | |
389 across function calls. */ | |
390 extern struct rtx_def *hppa_pic_save_rtx (void); | |
391 | |
392 #define DEFAULT_PCC_STRUCT_RETURN 0 | |
393 | |
394 /* Register in which address to store a structure value | |
395 is passed to a function. */ | |
396 #define PA_STRUCT_VALUE_REGNUM 28 | |
397 | |
398 /* Describe how we implement __builtin_eh_return. */ | |
399 #define EH_RETURN_DATA_REGNO(N) \ | |
400 ((N) < 3 ? (N) + 20 : (N) == 3 ? 31 : INVALID_REGNUM) | |
401 #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, 29) | |
402 #define EH_RETURN_HANDLER_RTX pa_eh_return_handler_rtx () | |
403 | |
404 /* Offset from the frame pointer register value to the top of stack. */ | |
405 #define FRAME_POINTER_CFA_OFFSET(FNDECL) 0 | |
406 | |
407 /* A C expression whose value is RTL representing the location of the | |
408 incoming return address at the beginning of any function, before the | |
409 prologue. You only need to define this macro if you want to support | |
410 call frame debugging information like that provided by DWARF 2. */ | |
411 #define INCOMING_RETURN_ADDR_RTX (gen_rtx_REG (word_mode, 2)) | |
412 #define DWARF_FRAME_RETURN_COLUMN (DWARF_FRAME_REGNUM (2)) | |
413 | |
414 /* A C expression whose value is an integer giving a DWARF 2 column | |
415 number that may be used as an alternate return column. This should | |
416 be defined only if DWARF_FRAME_RETURN_COLUMN is set to a general | |
417 register, but an alternate column needs to be used for signal frames. | |
418 | |
419 Column 0 is not used but unfortunately its register size is set to | |
420 4 bytes (sizeof CCmode) so it can't be used on 64-bit targets. */ | |
421 #define DWARF_ALT_FRAME_RETURN_COLUMN FIRST_PSEUDO_REGISTER | |
422 | |
423 /* This macro chooses the encoding of pointers embedded in the exception | |
424 handling sections. If at all possible, this should be defined such | |
425 that the exception handling section will not require dynamic relocations, | |
426 and so may be read-only. | |
427 | |
428 Because the HP assembler auto aligns, it is necessary to use | |
429 DW_EH_PE_aligned. It's not possible to make the data read-only | |
430 on the HP-UX SOM port since the linker requires fixups for label | |
431 differences in different sections to be word aligned. However, | |
432 the SOM linker can do unaligned fixups for absolute pointers. | |
433 We also need aligned pointers for global and function pointers. | |
434 | |
435 Although the HP-UX 64-bit ELF linker can handle unaligned pc-relative | |
436 fixups, the runtime doesn't have a consistent relationship between | |
437 text and data for dynamically loaded objects. Thus, it's not possible | |
438 to use pc-relative encoding for pointers on this target. It may be | |
439 possible to use segment relative encodings but GAS doesn't currently | |
440 have a mechanism to generate these encodings. For other targets, we | |
441 use pc-relative encoding for pointers. If the pointer might require | |
442 dynamic relocation, we make it indirect. */ | |
443 #define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) \ | |
444 (TARGET_GAS && !TARGET_HPUX \ | |
445 ? (DW_EH_PE_pcrel \ | |
446 | ((GLOBAL) || (CODE) == 2 ? DW_EH_PE_indirect : 0) \ | |
447 | (TARGET_64BIT ? DW_EH_PE_sdata8 : DW_EH_PE_sdata4)) \ | |
448 : (!TARGET_GAS || (GLOBAL) || (CODE) == 2 \ | |
449 ? DW_EH_PE_aligned : DW_EH_PE_absptr)) | |
450 | |
451 /* Handle special EH pointer encodings. Absolute, pc-relative, and | |
452 indirect are handled automatically. We output pc-relative, and | |
453 indirect pc-relative ourself since we need some special magic to | |
454 generate pc-relative relocations, and to handle indirect function | |
455 pointers. */ | |
456 #define ASM_MAYBE_OUTPUT_ENCODED_ADDR_RTX(FILE, ENCODING, SIZE, ADDR, DONE) \ | |
457 do { \ | |
458 if (((ENCODING) & 0x70) == DW_EH_PE_pcrel) \ | |
459 { \ | |
460 fputs (integer_asm_op (SIZE, FALSE), FILE); \ | |
461 if ((ENCODING) & DW_EH_PE_indirect) \ | |
462 output_addr_const (FILE, get_deferred_plabel (ADDR)); \ | |
463 else \ | |
464 assemble_name (FILE, XSTR ((ADDR), 0)); \ | |
465 fputs ("+8-$PIC_pcrel$0", FILE); \ | |
466 goto DONE; \ | |
467 } \ | |
468 } while (0) | |
469 | |
470 | |
471 /* The class value for index registers, and the one for base regs. */ | |
472 #define INDEX_REG_CLASS GENERAL_REGS | |
473 #define BASE_REG_CLASS GENERAL_REGS | |
474 | |
475 #define FP_REG_CLASS_P(CLASS) \ | |
476 ((CLASS) == FP_REGS || (CLASS) == FPUPPER_REGS) | |
477 | |
478 /* True if register is floating-point. */ | |
479 #define FP_REGNO_P(N) ((N) >= FP_REG_FIRST && (N) <= FP_REG_LAST) | |
480 | |
481 /* Given an rtx X being reloaded into a reg required to be | |
482 in class CLASS, return the class of reg to actually use. | |
483 In general this is just CLASS; but on some machines | |
484 in some cases it is preferable to use a more restrictive class. */ | |
485 #define PREFERRED_RELOAD_CLASS(X,CLASS) (CLASS) | |
486 | |
487 #define MAYBE_FP_REG_CLASS_P(CLASS) \ | |
488 reg_classes_intersect_p ((CLASS), FP_REGS) | |
489 | |
490 | |
491 /* Stack layout; function entry, exit and calling. */ | |
492 | |
493 /* Define this if pushing a word on the stack | |
494 makes the stack pointer a smaller address. */ | |
495 /* #define STACK_GROWS_DOWNWARD */ | |
496 | |
497 /* Believe it or not. */ | |
498 #define ARGS_GROW_DOWNWARD | |
499 | |
500 /* Define this to nonzero if the nominal address of the stack frame | |
501 is at the high-address end of the local variables; | |
502 that is, each additional local variable allocated | |
503 goes at a more negative offset in the frame. */ | |
504 #define FRAME_GROWS_DOWNWARD 0 | |
505 | |
506 /* Offset within stack frame to start allocating local variables at. | |
507 If FRAME_GROWS_DOWNWARD, this is the offset to the END of the | |
508 first local allocated. Otherwise, it is the offset to the BEGINNING | |
509 of the first local allocated. | |
510 | |
511 On the 32-bit ports, we reserve one slot for the previous frame | |
512 pointer and one fill slot. The fill slot is for compatibility | |
513 with HP compiled programs. On the 64-bit ports, we reserve one | |
514 slot for the previous frame pointer. */ | |
515 #define STARTING_FRAME_OFFSET 8 | |
516 | |
517 /* Define STACK_ALIGNMENT_NEEDED to zero to disable final alignment | |
518 of the stack. The default is to align it to STACK_BOUNDARY. */ | |
519 #define STACK_ALIGNMENT_NEEDED 0 | |
520 | |
521 /* If we generate an insn to push BYTES bytes, | |
522 this says how many the stack pointer really advances by. | |
523 On the HP-PA, don't define this because there are no push insns. */ | |
524 /* #define PUSH_ROUNDING(BYTES) */ | |
525 | |
526 /* Offset of first parameter from the argument pointer register value. | |
527 This value will be negated because the arguments grow down. | |
528 Also note that on STACK_GROWS_UPWARD machines (such as this one) | |
529 this is the distance from the frame pointer to the end of the first | |
530 argument, not it's beginning. To get the real offset of the first | |
531 argument, the size of the argument must be added. */ | |
532 | |
533 #define FIRST_PARM_OFFSET(FNDECL) (TARGET_64BIT ? -64 : -32) | |
534 | |
535 /* When a parameter is passed in a register, stack space is still | |
536 allocated for it. */ | |
537 #define REG_PARM_STACK_SPACE(DECL) (TARGET_64BIT ? 64 : 16) | |
538 | |
539 /* Define this if the above stack space is to be considered part of the | |
540 space allocated by the caller. */ | |
541 #define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1 | |
542 | |
543 /* Keep the stack pointer constant throughout the function. | |
544 This is both an optimization and a necessity: longjmp | |
545 doesn't behave itself when the stack pointer moves within | |
546 the function! */ | |
547 #define ACCUMULATE_OUTGOING_ARGS 1 | |
548 | |
549 /* The weird HPPA calling conventions require a minimum of 48 bytes on | |
550 the stack: 16 bytes for register saves, and 32 bytes for magic. | |
551 This is the difference between the logical top of stack and the | |
552 actual sp. | |
553 | |
554 On the 64-bit port, the HP C compiler allocates a 48-byte frame | |
555 marker, although the runtime documentation only describes a 16 | |
556 byte marker. For compatibility, we allocate 48 bytes. */ | |
557 #define STACK_POINTER_OFFSET \ | |
558 (TARGET_64BIT ? -(crtl->outgoing_args_size + 48): -32) | |
559 | |
560 #define STACK_DYNAMIC_OFFSET(FNDECL) \ | |
561 (TARGET_64BIT \ | |
562 ? (STACK_POINTER_OFFSET) \ | |
563 : ((STACK_POINTER_OFFSET) - crtl->outgoing_args_size)) | |
564 | |
565 /* Value is 1 if returning from a function call automatically | |
566 pops the arguments described by the number-of-args field in the call. | |
567 FUNDECL is the declaration node of the function (as a tree), | |
568 FUNTYPE is the data type of the function (as a tree), | |
569 or for a library call it is an identifier node for the subroutine name. */ | |
570 | |
571 #define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0 | |
572 | |
573 /* Define how to find the value returned by a library function | |
574 assuming the value has mode MODE. */ | |
575 | |
576 #define LIBCALL_VALUE(MODE) \ | |
577 gen_rtx_REG (MODE, \ | |
578 (! TARGET_SOFT_FLOAT \ | |
579 && ((MODE) == SFmode || (MODE) == DFmode) ? 32 : 28)) | |
580 | |
581 /* 1 if N is a possible register number for a function value | |
582 as seen by the caller. */ | |
583 | |
584 #define FUNCTION_VALUE_REGNO_P(N) \ | |
585 ((N) == 28 || (! TARGET_SOFT_FLOAT && (N) == 32)) | |
586 | |
587 | |
588 /* Define a data type for recording info about an argument list | |
589 during the scan of that argument list. This data type should | |
590 hold all necessary information about the function itself | |
591 and about the args processed so far, enough to enable macros | |
592 such as FUNCTION_ARG to determine where the next arg should go. | |
593 | |
594 On the HP-PA, the WORDS field holds the number of words | |
595 of arguments scanned so far (including the invisible argument, | |
596 if any, which holds the structure-value-address). Thus, 4 or | |
597 more means all following args should go on the stack. | |
598 | |
599 The INCOMING field tracks whether this is an "incoming" or | |
600 "outgoing" argument. | |
601 | |
602 The INDIRECT field indicates whether this is is an indirect | |
603 call or not. | |
604 | |
605 The NARGS_PROTOTYPE field indicates that an argument does not | |
606 have a prototype when it less than or equal to 0. */ | |
607 | |
608 struct hppa_args {int words, nargs_prototype, incoming, indirect; }; | |
609 | |
610 #define CUMULATIVE_ARGS struct hppa_args | |
611 | |
612 /* Initialize a variable CUM of type CUMULATIVE_ARGS | |
613 for a call to a function whose data type is FNTYPE. | |
614 For a library call, FNTYPE is 0. */ | |
615 | |
616 #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, FNDECL, N_NAMED_ARGS) \ | |
617 (CUM).words = 0, \ | |
618 (CUM).incoming = 0, \ | |
619 (CUM).indirect = (FNTYPE) && !(FNDECL), \ | |
620 (CUM).nargs_prototype = (FNTYPE && TYPE_ARG_TYPES (FNTYPE) \ | |
621 ? (list_length (TYPE_ARG_TYPES (FNTYPE)) - 1 \ | |
622 + (TYPE_MODE (TREE_TYPE (FNTYPE)) == BLKmode \ | |
623 || pa_return_in_memory (TREE_TYPE (FNTYPE), 0))) \ | |
624 : 0) | |
625 | |
626 | |
627 | |
628 /* Similar, but when scanning the definition of a procedure. We always | |
629 set NARGS_PROTOTYPE large so we never return a PARALLEL. */ | |
630 | |
631 #define INIT_CUMULATIVE_INCOMING_ARGS(CUM,FNTYPE,IGNORE) \ | |
632 (CUM).words = 0, \ | |
633 (CUM).incoming = 1, \ | |
634 (CUM).indirect = 0, \ | |
635 (CUM).nargs_prototype = 1000 | |
636 | |
637 /* Figure out the size in words of the function argument. The size | |
638 returned by this macro should always be greater than zero because | |
639 we pass variable and zero sized objects by reference. */ | |
640 | |
641 #define FUNCTION_ARG_SIZE(MODE, TYPE) \ | |
642 ((((MODE) != BLKmode \ | |
643 ? (HOST_WIDE_INT) GET_MODE_SIZE (MODE) \ | |
644 : int_size_in_bytes (TYPE)) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) | |
645 | |
646 /* Update the data in CUM to advance over an argument | |
647 of mode MODE and data type TYPE. | |
648 (TYPE is null for libcalls where that information may not be available.) */ | |
649 | |
650 #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \ | |
651 { (CUM).nargs_prototype--; \ | |
652 (CUM).words += FUNCTION_ARG_SIZE(MODE, TYPE) \ | |
653 + (((CUM).words & 01) && (TYPE) != 0 \ | |
654 && FUNCTION_ARG_SIZE(MODE, TYPE) > 1); \ | |
655 } | |
656 | |
657 /* Determine where to put an argument to a function. | |
658 Value is zero to push the argument on the stack, | |
659 or a hard register in which to store the argument. | |
660 | |
661 MODE is the argument's machine mode. | |
662 TYPE is the data type of the argument (as a tree). | |
663 This is null for libcalls where that information may | |
664 not be available. | |
665 CUM is a variable of type CUMULATIVE_ARGS which gives info about | |
666 the preceding args and about the function being called. | |
667 NAMED is nonzero if this argument is a named parameter | |
668 (otherwise it is an extra parameter matching an ellipsis). | |
669 | |
670 On the HP-PA the first four words of args are normally in registers | |
671 and the rest are pushed. But any arg that won't entirely fit in regs | |
672 is pushed. | |
673 | |
674 Arguments passed in registers are either 1 or 2 words long. | |
675 | |
676 The caller must make a distinction between calls to explicitly named | |
677 functions and calls through pointers to functions -- the conventions | |
678 are different! Calls through pointers to functions only use general | |
679 registers for the first four argument words. | |
680 | |
681 Of course all this is different for the portable runtime model | |
682 HP wants everyone to use for ELF. Ugh. Here's a quick description | |
683 of how it's supposed to work. | |
684 | |
685 1) callee side remains unchanged. It expects integer args to be | |
686 in the integer registers, float args in the float registers and | |
687 unnamed args in integer registers. | |
688 | |
689 2) caller side now depends on if the function being called has | |
690 a prototype in scope (rather than if it's being called indirectly). | |
691 | |
692 2a) If there is a prototype in scope, then arguments are passed | |
693 according to their type (ints in integer registers, floats in float | |
694 registers, unnamed args in integer registers. | |
695 | |
696 2b) If there is no prototype in scope, then floating point arguments | |
697 are passed in both integer and float registers. egad. | |
698 | |
699 FYI: The portable parameter passing conventions are almost exactly like | |
700 the standard parameter passing conventions on the RS6000. That's why | |
701 you'll see lots of similar code in rs6000.h. */ | |
702 | |
703 /* If defined, a C expression which determines whether, and in which | |
704 direction, to pad out an argument with extra space. */ | |
705 #define FUNCTION_ARG_PADDING(MODE, TYPE) function_arg_padding ((MODE), (TYPE)) | |
706 | |
707 /* Specify padding for the last element of a block move between registers | |
708 and memory. | |
709 | |
710 The 64-bit runtime specifies that objects need to be left justified | |
711 (i.e., the normal justification for a big endian target). The 32-bit | |
712 runtime specifies right justification for objects smaller than 64 bits. | |
713 We use a DImode register in the parallel for 5 to 7 byte structures | |
714 so that there is only one element. This allows the object to be | |
715 correctly padded. */ | |
716 #define BLOCK_REG_PADDING(MODE, TYPE, FIRST) \ | |
717 function_arg_padding ((MODE), (TYPE)) | |
718 | |
719 /* Do not expect to understand this without reading it several times. I'm | |
720 tempted to try and simply it, but I worry about breaking something. */ | |
721 | |
722 #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \ | |
723 function_arg (&CUM, MODE, TYPE, NAMED) | |
724 | |
725 /* If defined, a C expression that gives the alignment boundary, in | |
726 bits, of an argument with the specified mode and type. If it is | |
727 not defined, `PARM_BOUNDARY' is used for all arguments. */ | |
728 | |
729 /* Arguments larger than one word are double word aligned. */ | |
730 | |
731 #define FUNCTION_ARG_BOUNDARY(MODE, TYPE) \ | |
732 (((TYPE) \ | |
733 ? (integer_zerop (TYPE_SIZE (TYPE)) \ | |
734 || !TREE_CONSTANT (TYPE_SIZE (TYPE)) \ | |
735 || int_size_in_bytes (TYPE) <= UNITS_PER_WORD) \ | |
736 : GET_MODE_SIZE(MODE) <= UNITS_PER_WORD) \ | |
737 ? PARM_BOUNDARY : MAX_PARM_BOUNDARY) | |
738 | |
739 | |
740 /* On HPPA, we emit profiling code as rtl via PROFILE_HOOK rather than | |
741 as assembly via FUNCTION_PROFILER. Just output a local label. | |
742 We can't use the function label because the GAS SOM target can't | |
743 handle the difference of a global symbol and a local symbol. */ | |
744 | |
745 #ifndef FUNC_BEGIN_PROLOG_LABEL | |
746 #define FUNC_BEGIN_PROLOG_LABEL "LFBP" | |
747 #endif | |
748 | |
749 #define FUNCTION_PROFILER(FILE, LABEL) \ | |
750 (*targetm.asm_out.internal_label) (FILE, FUNC_BEGIN_PROLOG_LABEL, LABEL) | |
751 | |
752 #define PROFILE_HOOK(label_no) hppa_profile_hook (label_no) | |
753 void hppa_profile_hook (int label_no); | |
754 | |
755 /* The profile counter if emitted must come before the prologue. */ | |
756 #define PROFILE_BEFORE_PROLOGUE 1 | |
757 | |
758 /* We never want final.c to emit profile counters. When profile | |
759 counters are required, we have to defer emitting them to the end | |
760 of the current file. */ | |
761 #define NO_PROFILE_COUNTERS 1 | |
762 | |
763 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function, | |
764 the stack pointer does not matter. The value is tested only in | |
765 functions that have frame pointers. | |
766 No definition is equivalent to always zero. */ | |
767 | |
768 extern int may_call_alloca; | |
769 | |
770 #define EXIT_IGNORE_STACK \ | |
771 (get_frame_size () != 0 \ | |
772 || cfun->calls_alloca || crtl->outgoing_args_size) | |
773 | |
774 /* Length in units of the trampoline for entering a nested function. */ | |
775 | |
776 #define TRAMPOLINE_SIZE (TARGET_64BIT ? 72 : 52) | |
777 | |
55
77e2b8dfacca
update it from 4.4.3 to 4.5.0
ryoma <e075725@ie.u-ryukyu.ac.jp>
parents:
0
diff
changeset
|
778 /* Alignment required by the trampoline. */ |
0 | 779 |
55
77e2b8dfacca
update it from 4.4.3 to 4.5.0
ryoma <e075725@ie.u-ryukyu.ac.jp>
parents:
0
diff
changeset
|
780 #define TRAMPOLINE_ALIGNMENT BITS_PER_WORD |
0 | 781 |
782 /* Minimum length of a cache line. A length of 16 will work on all | |
783 PA-RISC processors. All PA 1.1 processors have a cache line of | |
784 32 bytes. Most but not all PA 2.0 processors have a cache line | |
785 of 64 bytes. As cache flushes are expensive and we don't support | |
786 PA 1.0, we use a minimum length of 32. */ | |
787 | |
788 #define MIN_CACHELINE_SIZE 32 | |
789 | |
790 | |
791 /* Addressing modes, and classification of registers for them. | |
792 | |
793 Using autoincrement addressing modes on PA8000 class machines is | |
794 not profitable. */ | |
795 | |
796 #define HAVE_POST_INCREMENT (pa_cpu < PROCESSOR_8000) | |
797 #define HAVE_POST_DECREMENT (pa_cpu < PROCESSOR_8000) | |
798 | |
799 #define HAVE_PRE_DECREMENT (pa_cpu < PROCESSOR_8000) | |
800 #define HAVE_PRE_INCREMENT (pa_cpu < PROCESSOR_8000) | |
801 | |
802 /* Macros to check register numbers against specific register classes. */ | |
803 | |
804 /* The following macros assume that X is a hard or pseudo reg number. | |
805 They give nonzero only if X is a hard reg of the suitable class | |
806 or a pseudo reg currently allocated to a suitable hard reg. | |
807 Since they use reg_renumber, they are safe only once reg_renumber | |
808 has been allocated, which happens in local-alloc.c. */ | |
809 | |
810 #define REGNO_OK_FOR_INDEX_P(X) \ | |
811 ((X) && ((X) < 32 \ | |
812 || (X >= FIRST_PSEUDO_REGISTER \ | |
813 && reg_renumber \ | |
814 && (unsigned) reg_renumber[X] < 32))) | |
815 #define REGNO_OK_FOR_BASE_P(X) \ | |
816 ((X) && ((X) < 32 \ | |
817 || (X >= FIRST_PSEUDO_REGISTER \ | |
818 && reg_renumber \ | |
819 && (unsigned) reg_renumber[X] < 32))) | |
820 #define REGNO_OK_FOR_FP_P(X) \ | |
821 (FP_REGNO_P (X) \ | |
822 || (X >= FIRST_PSEUDO_REGISTER \ | |
823 && reg_renumber \ | |
824 && FP_REGNO_P (reg_renumber[X]))) | |
825 | |
826 /* Now macros that check whether X is a register and also, | |
827 strictly, whether it is in a specified class. | |
828 | |
829 These macros are specific to the HP-PA, and may be used only | |
830 in code for printing assembler insns and in conditions for | |
831 define_optimization. */ | |
832 | |
833 /* 1 if X is an fp register. */ | |
834 | |
835 #define FP_REG_P(X) (REG_P (X) && REGNO_OK_FOR_FP_P (REGNO (X))) | |
836 | |
837 /* Maximum number of registers that can appear in a valid memory address. */ | |
838 | |
839 #define MAX_REGS_PER_ADDRESS 2 | |
840 | |
841 /* Non-TLS symbolic references. */ | |
842 #define PA_SYMBOL_REF_TLS_P(RTX) \ | |
843 (GET_CODE (RTX) == SYMBOL_REF && SYMBOL_REF_TLS_MODEL (RTX) != 0) | |
844 | |
845 /* Recognize any constant value that is a valid address except | |
846 for symbolic addresses. We get better CSE by rejecting them | |
847 here and allowing hppa_legitimize_address to break them up. We | |
848 use most of the constants accepted by CONSTANT_P, except CONST_DOUBLE. */ | |
849 | |
850 #define CONSTANT_ADDRESS_P(X) \ | |
851 ((GET_CODE (X) == LABEL_REF \ | |
852 || (GET_CODE (X) == SYMBOL_REF && !SYMBOL_REF_TLS_MODEL (X)) \ | |
853 || GET_CODE (X) == CONST_INT || GET_CODE (X) == CONST \ | |
854 || GET_CODE (X) == HIGH) \ | |
855 && (reload_in_progress || reload_completed || ! symbolic_expression_p (X))) | |
856 | |
857 /* A C expression that is nonzero if we are using the new HP assembler. */ | |
858 | |
859 #ifndef NEW_HP_ASSEMBLER | |
860 #define NEW_HP_ASSEMBLER 0 | |
861 #endif | |
862 | |
863 /* The macros below define the immediate range for CONST_INTS on | |
864 the 64-bit port. Constants in this range can be loaded in three | |
865 instructions using a ldil/ldo/depdi sequence. Constants outside | |
866 this range are forced to the constant pool prior to reload. */ | |
867 | |
868 #define MAX_LEGIT_64BIT_CONST_INT ((HOST_WIDE_INT) 32 << 31) | |
869 #define MIN_LEGIT_64BIT_CONST_INT ((HOST_WIDE_INT) -32 << 31) | |
870 #define LEGITIMATE_64BIT_CONST_INT_P(X) \ | |
871 ((X) >= MIN_LEGIT_64BIT_CONST_INT && (X) < MAX_LEGIT_64BIT_CONST_INT) | |
872 | |
873 /* A C expression that is nonzero if X is a legitimate constant for an | |
874 immediate operand. | |
875 | |
876 We include all constant integers and constant doubles, but not | |
877 floating-point, except for floating-point zero. We reject LABEL_REFs | |
878 if we're not using gas or the new HP assembler. | |
879 | |
880 In 64-bit mode, we reject CONST_DOUBLES. We also reject CONST_INTS | |
881 that need more than three instructions to load prior to reload. This | |
882 limit is somewhat arbitrary. It takes three instructions to load a | |
883 CONST_INT from memory but two are memory accesses. It may be better | |
884 to increase the allowed range for CONST_INTS. We may also be able | |
885 to handle CONST_DOUBLES. */ | |
886 | |
887 #define LEGITIMATE_CONSTANT_P(X) \ | |
888 ((GET_MODE_CLASS (GET_MODE (X)) != MODE_FLOAT \ | |
889 || (X) == CONST0_RTX (GET_MODE (X))) \ | |
890 && (NEW_HP_ASSEMBLER \ | |
891 || TARGET_GAS \ | |
892 || GET_CODE (X) != LABEL_REF) \ | |
893 && (!TARGET_64BIT \ | |
894 || GET_CODE (X) != CONST_DOUBLE) \ | |
895 && (!TARGET_64BIT \ | |
896 || HOST_BITS_PER_WIDE_INT <= 32 \ | |
897 || GET_CODE (X) != CONST_INT \ | |
898 || reload_in_progress \ | |
899 || reload_completed \ | |
900 || LEGITIMATE_64BIT_CONST_INT_P (INTVAL (X)) \ | |
901 || cint_ok_for_move (INTVAL (X))) \ | |
902 && !function_label_operand (X, VOIDmode)) | |
903 | |
904 /* Target flags set on a symbol_ref. */ | |
905 | |
906 /* Set by ASM_OUTPUT_SYMBOL_REF when a symbol_ref is output. */ | |
907 #define SYMBOL_FLAG_REFERENCED (1 << SYMBOL_FLAG_MACH_DEP_SHIFT) | |
908 #define SYMBOL_REF_REFERENCED_P(RTX) \ | |
909 ((SYMBOL_REF_FLAGS (RTX) & SYMBOL_FLAG_REFERENCED) != 0) | |
910 | |
911 /* Defines for constraints.md. */ | |
912 | |
913 /* Return 1 iff OP is a scaled or unscaled index address. */ | |
914 #define IS_INDEX_ADDR_P(OP) \ | |
915 (GET_CODE (OP) == PLUS \ | |
916 && GET_MODE (OP) == Pmode \ | |
917 && (GET_CODE (XEXP (OP, 0)) == MULT \ | |
918 || GET_CODE (XEXP (OP, 1)) == MULT \ | |
919 || (REG_P (XEXP (OP, 0)) \ | |
920 && REG_P (XEXP (OP, 1))))) | |
921 | |
922 /* Return 1 iff OP is a LO_SUM DLT address. */ | |
923 #define IS_LO_SUM_DLT_ADDR_P(OP) \ | |
924 (GET_CODE (OP) == LO_SUM \ | |
925 && GET_MODE (OP) == Pmode \ | |
926 && REG_P (XEXP (OP, 0)) \ | |
927 && REG_OK_FOR_BASE_P (XEXP (OP, 0)) \ | |
928 && GET_CODE (XEXP (OP, 1)) == UNSPEC) | |
929 | |
930 /* Nonzero if 14-bit offsets can be used for all loads and stores. | |
931 This is not possible when generating PA 1.x code as floating point | |
932 loads and stores only support 5-bit offsets. Note that we do not | |
933 forbid the use of 14-bit offsets in GO_IF_LEGITIMATE_ADDRESS. | |
934 Instead, we use pa_secondary_reload() to reload integer mode | |
935 REG+D memory addresses used in floating point loads and stores. | |
936 | |
937 FIXME: the ELF32 linker clobbers the LSB of the FP register number | |
938 in PA 2.0 floating-point insns with long displacements. This is | |
939 because R_PARISC_DPREL14WR and other relocations like it are not | |
940 yet supported by GNU ld. For now, we reject long displacements | |
941 on this target. */ | |
942 | |
943 #define INT14_OK_STRICT \ | |
944 (TARGET_SOFT_FLOAT \ | |
945 || TARGET_DISABLE_FPREGS \ | |
946 || (TARGET_PA_20 && !TARGET_ELF32)) | |
947 | |
948 /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx | |
949 and check its validity for a certain class. | |
950 We have two alternate definitions for each of them. | |
951 The usual definition accepts all pseudo regs; the other rejects | |
952 them unless they have been allocated suitable hard regs. | |
953 The symbol REG_OK_STRICT causes the latter definition to be used. | |
954 | |
955 Most source files want to accept pseudo regs in the hope that | |
956 they will get allocated to the class that the insn wants them to be in. | |
957 Source files for reload pass need to be strict. | |
958 After reload, it makes no difference, since pseudo regs have | |
959 been eliminated by then. */ | |
960 | |
961 #ifndef REG_OK_STRICT | |
962 | |
963 /* Nonzero if X is a hard reg that can be used as an index | |
964 or if it is a pseudo reg. */ | |
965 #define REG_OK_FOR_INDEX_P(X) \ | |
966 (REGNO (X) && (REGNO (X) < 32 || REGNO (X) >= FIRST_PSEUDO_REGISTER)) | |
967 | |
968 /* Nonzero if X is a hard reg that can be used as a base reg | |
969 or if it is a pseudo reg. */ | |
970 #define REG_OK_FOR_BASE_P(X) \ | |
971 (REGNO (X) && (REGNO (X) < 32 || REGNO (X) >= FIRST_PSEUDO_REGISTER)) | |
972 | |
973 #else | |
974 | |
975 /* Nonzero if X is a hard reg that can be used as an index. */ | |
976 #define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X)) | |
977 | |
978 /* Nonzero if X is a hard reg that can be used as a base reg. */ | |
979 #define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X)) | |
980 | |
981 #endif | |
982 | |
983 /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression that is a | |
984 valid memory address for an instruction. The MODE argument is the | |
985 machine mode for the MEM expression that wants to use this address. | |
986 | |
987 On HP PA-RISC, the legitimate address forms are REG+SMALLINT, | |
988 REG+REG, and REG+(REG*SCALE). The indexed address forms are only | |
989 available with floating point loads and stores, and integer loads. | |
990 We get better code by allowing indexed addresses in the initial | |
991 RTL generation. | |
992 | |
993 The acceptance of indexed addresses as legitimate implies that we | |
994 must provide patterns for doing indexed integer stores, or the move | |
995 expanders must force the address of an indexed store to a register. | |
996 We have adopted the latter approach. | |
997 | |
998 Another function of GO_IF_LEGITIMATE_ADDRESS is to ensure that | |
999 the base register is a valid pointer for indexed instructions. | |
1000 On targets that have non-equivalent space registers, we have to | |
1001 know at the time of assembler output which register in a REG+REG | |
1002 pair is the base register. The REG_POINTER flag is sometimes lost | |
1003 in reload and the following passes, so it can't be relied on during | |
1004 code generation. Thus, we either have to canonicalize the order | |
1005 of the registers in REG+REG indexed addresses, or treat REG+REG | |
1006 addresses separately and provide patterns for both permutations. | |
1007 | |
1008 The latter approach requires several hundred additional lines of | |
1009 code in pa.md. The downside to canonicalizing is that a PLUS | |
1010 in the wrong order can't combine to form to make a scaled indexed | |
1011 memory operand. As we won't need to canonicalize the operands if | |
1012 the REG_POINTER lossage can be fixed, it seems better canonicalize. | |
1013 | |
1014 We initially break out scaled indexed addresses in canonical order | |
1015 in emit_move_sequence. LEGITIMIZE_ADDRESS also canonicalizes | |
1016 scaled indexed addresses during RTL generation. However, fold_rtx | |
1017 has its own opinion on how the operands of a PLUS should be ordered. | |
1018 If one of the operands is equivalent to a constant, it will make | |
1019 that operand the second operand. As the base register is likely to | |
1020 be equivalent to a SYMBOL_REF, we have made it the second operand. | |
1021 | |
1022 GO_IF_LEGITIMATE_ADDRESS accepts REG+REG as legitimate when the | |
1023 operands are in the order INDEX+BASE on targets with non-equivalent | |
1024 space registers, and in any order on targets with equivalent space | |
1025 registers. It accepts both MULT+BASE and BASE+MULT for scaled indexing. | |
1026 | |
1027 We treat a SYMBOL_REF as legitimate if it is part of the current | |
1028 function's constant-pool, because such addresses can actually be | |
1029 output as REG+SMALLINT. */ | |
1030 | |
1031 #define VAL_5_BITS_P(X) ((unsigned HOST_WIDE_INT)(X) + 0x10 < 0x20) | |
1032 #define INT_5_BITS(X) VAL_5_BITS_P (INTVAL (X)) | |
1033 | |
1034 #define VAL_U5_BITS_P(X) ((unsigned HOST_WIDE_INT)(X) < 0x20) | |
1035 #define INT_U5_BITS(X) VAL_U5_BITS_P (INTVAL (X)) | |
1036 | |
1037 #define VAL_11_BITS_P(X) ((unsigned HOST_WIDE_INT)(X) + 0x400 < 0x800) | |
1038 #define INT_11_BITS(X) VAL_11_BITS_P (INTVAL (X)) | |
1039 | |
1040 #define VAL_14_BITS_P(X) ((unsigned HOST_WIDE_INT)(X) + 0x2000 < 0x4000) | |
1041 #define INT_14_BITS(X) VAL_14_BITS_P (INTVAL (X)) | |
1042 | |
1043 #if HOST_BITS_PER_WIDE_INT > 32 | |
1044 #define VAL_32_BITS_P(X) \ | |
1045 ((unsigned HOST_WIDE_INT)(X) + ((unsigned HOST_WIDE_INT) 1 << 31) \ | |
1046 < (unsigned HOST_WIDE_INT) 2 << 31) | |
1047 #else | |
1048 #define VAL_32_BITS_P(X) 1 | |
1049 #endif | |
1050 #define INT_32_BITS(X) VAL_32_BITS_P (INTVAL (X)) | |
1051 | |
1052 /* These are the modes that we allow for scaled indexing. */ | |
1053 #define MODE_OK_FOR_SCALED_INDEXING_P(MODE) \ | |
1054 ((TARGET_64BIT && (MODE) == DImode) \ | |
1055 || (MODE) == SImode \ | |
1056 || (MODE) == HImode \ | |
1057 || (MODE) == SFmode \ | |
1058 || (MODE) == DFmode) | |
1059 | |
1060 /* These are the modes that we allow for unscaled indexing. */ | |
1061 #define MODE_OK_FOR_UNSCALED_INDEXING_P(MODE) \ | |
1062 ((TARGET_64BIT && (MODE) == DImode) \ | |
1063 || (MODE) == SImode \ | |
1064 || (MODE) == HImode \ | |
1065 || (MODE) == QImode \ | |
1066 || (MODE) == SFmode \ | |
1067 || (MODE) == DFmode) | |
1068 | |
1069 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \ | |
1070 { \ | |
1071 if ((REG_P (X) && REG_OK_FOR_BASE_P (X)) \ | |
1072 || ((GET_CODE (X) == PRE_DEC || GET_CODE (X) == POST_DEC \ | |
1073 || GET_CODE (X) == PRE_INC || GET_CODE (X) == POST_INC) \ | |
1074 && REG_P (XEXP (X, 0)) \ | |
1075 && REG_OK_FOR_BASE_P (XEXP (X, 0)))) \ | |
1076 goto ADDR; \ | |
1077 else if (GET_CODE (X) == PLUS) \ | |
1078 { \ | |
1079 rtx base = 0, index = 0; \ | |
1080 if (REG_P (XEXP (X, 1)) \ | |
1081 && REG_OK_FOR_BASE_P (XEXP (X, 1))) \ | |
1082 base = XEXP (X, 1), index = XEXP (X, 0); \ | |
1083 else if (REG_P (XEXP (X, 0)) \ | |
1084 && REG_OK_FOR_BASE_P (XEXP (X, 0))) \ | |
1085 base = XEXP (X, 0), index = XEXP (X, 1); \ | |
1086 if (base \ | |
1087 && GET_CODE (index) == CONST_INT \ | |
1088 && ((INT_14_BITS (index) \ | |
1089 && (((MODE) != DImode \ | |
1090 && (MODE) != SFmode \ | |
1091 && (MODE) != DFmode) \ | |
1092 /* The base register for DImode loads and stores \ | |
1093 with long displacements must be aligned because \ | |
1094 the lower three bits in the displacement are \ | |
1095 assumed to be zero. */ \ | |
1096 || ((MODE) == DImode \ | |
1097 && (!TARGET_64BIT \ | |
1098 || (INTVAL (index) % 8) == 0)) \ | |
1099 /* Similarly, the base register for SFmode/DFmode \ | |
1100 loads and stores with long displacements must \ | |
1101 be aligned. */ \ | |
1102 || (((MODE) == SFmode || (MODE) == DFmode) \ | |
1103 && INT14_OK_STRICT \ | |
1104 && (INTVAL (index) % GET_MODE_SIZE (MODE)) == 0))) \ | |
1105 || INT_5_BITS (index))) \ | |
1106 goto ADDR; \ | |
1107 if (!TARGET_DISABLE_INDEXING \ | |
1108 /* Only accept the "canonical" INDEX+BASE operand order \ | |
1109 on targets with non-equivalent space registers. */ \ | |
1110 && (TARGET_NO_SPACE_REGS \ | |
1111 ? (base && REG_P (index)) \ | |
1112 : (base == XEXP (X, 1) && REG_P (index) \ | |
1113 && (reload_completed \ | |
1114 || (reload_in_progress && HARD_REGISTER_P (base)) \ | |
1115 || REG_POINTER (base)) \ | |
1116 && (reload_completed \ | |
1117 || (reload_in_progress && HARD_REGISTER_P (index)) \ | |
1118 || !REG_POINTER (index)))) \ | |
1119 && MODE_OK_FOR_UNSCALED_INDEXING_P (MODE) \ | |
1120 && REG_OK_FOR_INDEX_P (index) \ | |
1121 && borx_reg_operand (base, Pmode) \ | |
1122 && borx_reg_operand (index, Pmode)) \ | |
1123 goto ADDR; \ | |
1124 if (!TARGET_DISABLE_INDEXING \ | |
1125 && base \ | |
1126 && GET_CODE (index) == MULT \ | |
1127 && MODE_OK_FOR_SCALED_INDEXING_P (MODE) \ | |
1128 && REG_P (XEXP (index, 0)) \ | |
1129 && GET_MODE (XEXP (index, 0)) == Pmode \ | |
1130 && REG_OK_FOR_INDEX_P (XEXP (index, 0)) \ | |
1131 && GET_CODE (XEXP (index, 1)) == CONST_INT \ | |
1132 && INTVAL (XEXP (index, 1)) \ | |
1133 == (HOST_WIDE_INT) GET_MODE_SIZE (MODE) \ | |
1134 && borx_reg_operand (base, Pmode)) \ | |
1135 goto ADDR; \ | |
1136 } \ | |
1137 else if (GET_CODE (X) == LO_SUM \ | |
1138 && GET_CODE (XEXP (X, 0)) == REG \ | |
1139 && REG_OK_FOR_BASE_P (XEXP (X, 0)) \ | |
1140 && CONSTANT_P (XEXP (X, 1)) \ | |
1141 && (TARGET_SOFT_FLOAT \ | |
1142 /* We can allow symbolic LO_SUM addresses for PA2.0. */ \ | |
1143 || (TARGET_PA_20 \ | |
1144 && !TARGET_ELF32 \ | |
1145 && GET_CODE (XEXP (X, 1)) != CONST_INT) \ | |
1146 || ((MODE) != SFmode \ | |
1147 && (MODE) != DFmode))) \ | |
1148 goto ADDR; \ | |
1149 else if (GET_CODE (X) == LO_SUM \ | |
1150 && GET_CODE (XEXP (X, 0)) == SUBREG \ | |
1151 && GET_CODE (SUBREG_REG (XEXP (X, 0))) == REG \ | |
1152 && REG_OK_FOR_BASE_P (SUBREG_REG (XEXP (X, 0))) \ | |
1153 && CONSTANT_P (XEXP (X, 1)) \ | |
1154 && (TARGET_SOFT_FLOAT \ | |
1155 /* We can allow symbolic LO_SUM addresses for PA2.0. */ \ | |
1156 || (TARGET_PA_20 \ | |
1157 && !TARGET_ELF32 \ | |
1158 && GET_CODE (XEXP (X, 1)) != CONST_INT) \ | |
1159 || ((MODE) != SFmode \ | |
1160 && (MODE) != DFmode))) \ | |
1161 goto ADDR; \ | |
1162 else if (GET_CODE (X) == LABEL_REF \ | |
1163 || (GET_CODE (X) == CONST_INT \ | |
1164 && INT_5_BITS (X))) \ | |
1165 goto ADDR; \ | |
1166 /* Needed for -fPIC */ \ | |
1167 else if (GET_CODE (X) == LO_SUM \ | |
1168 && GET_CODE (XEXP (X, 0)) == REG \ | |
1169 && REG_OK_FOR_BASE_P (XEXP (X, 0)) \ | |
1170 && GET_CODE (XEXP (X, 1)) == UNSPEC \ | |
1171 && (TARGET_SOFT_FLOAT \ | |
1172 || (TARGET_PA_20 && !TARGET_ELF32) \ | |
1173 || ((MODE) != SFmode \ | |
1174 && (MODE) != DFmode))) \ | |
1175 goto ADDR; \ | |
1176 } | |
1177 | |
1178 /* Look for machine dependent ways to make the invalid address AD a | |
1179 valid address. | |
1180 | |
1181 For the PA, transform: | |
1182 | |
1183 memory(X + <large int>) | |
1184 | |
1185 into: | |
1186 | |
1187 if (<large int> & mask) >= 16 | |
1188 Y = (<large int> & ~mask) + mask + 1 Round up. | |
1189 else | |
1190 Y = (<large int> & ~mask) Round down. | |
1191 Z = X + Y | |
1192 memory (Z + (<large int> - Y)); | |
1193 | |
1194 This makes reload inheritance and reload_cse work better since Z | |
1195 can be reused. | |
1196 | |
1197 There may be more opportunities to improve code with this hook. */ | |
1198 #define LEGITIMIZE_RELOAD_ADDRESS(AD, MODE, OPNUM, TYPE, IND, WIN) \ | |
1199 do { \ | |
1200 long offset, newoffset, mask; \ | |
1201 rtx new_rtx, temp = NULL_RTX; \ | |
1202 \ | |
1203 mask = (GET_MODE_CLASS (MODE) == MODE_FLOAT \ | |
1204 ? (INT14_OK_STRICT ? 0x3fff : 0x1f) : 0x3fff); \ | |
1205 \ | |
1206 if (optimize && GET_CODE (AD) == PLUS) \ | |
1207 temp = simplify_binary_operation (PLUS, Pmode, \ | |
1208 XEXP (AD, 0), XEXP (AD, 1)); \ | |
1209 \ | |
1210 new_rtx = temp ? temp : AD; \ | |
1211 \ | |
1212 if (optimize \ | |
1213 && GET_CODE (new_rtx) == PLUS \ | |
1214 && GET_CODE (XEXP (new_rtx, 0)) == REG \ | |
1215 && GET_CODE (XEXP (new_rtx, 1)) == CONST_INT) \ | |
1216 { \ | |
1217 offset = INTVAL (XEXP ((new_rtx), 1)); \ | |
1218 \ | |
1219 /* Choose rounding direction. Round up if we are >= halfway. */ \ | |
1220 if ((offset & mask) >= ((mask + 1) / 2)) \ | |
1221 newoffset = (offset & ~mask) + mask + 1; \ | |
1222 else \ | |
1223 newoffset = offset & ~mask; \ | |
1224 \ | |
1225 /* Ensure that long displacements are aligned. */ \ | |
1226 if (mask == 0x3fff \ | |
1227 && (GET_MODE_CLASS (MODE) == MODE_FLOAT \ | |
1228 || (TARGET_64BIT && (MODE) == DImode))) \ | |
1229 newoffset &= ~(GET_MODE_SIZE (MODE) - 1); \ | |
1230 \ | |
1231 if (newoffset != 0 && VAL_14_BITS_P (newoffset)) \ | |
1232 { \ | |
1233 temp = gen_rtx_PLUS (Pmode, XEXP (new_rtx, 0), \ | |
1234 GEN_INT (newoffset)); \ | |
1235 AD = gen_rtx_PLUS (Pmode, temp, GEN_INT (offset - newoffset));\ | |
1236 push_reload (XEXP (AD, 0), 0, &XEXP (AD, 0), 0, \ | |
1237 BASE_REG_CLASS, Pmode, VOIDmode, 0, 0, \ | |
1238 (OPNUM), (TYPE)); \ | |
1239 goto WIN; \ | |
1240 } \ | |
1241 } \ | |
1242 } while (0) | |
1243 | |
1244 | |
1245 | |
1246 #define TARGET_ASM_SELECT_SECTION pa_select_section | |
1247 | |
1248 /* Return a nonzero value if DECL has a section attribute. */ | |
1249 #define IN_NAMED_SECTION_P(DECL) \ | |
1250 ((TREE_CODE (DECL) == FUNCTION_DECL || TREE_CODE (DECL) == VAR_DECL) \ | |
1251 && DECL_SECTION_NAME (DECL) != NULL_TREE) | |
1252 | |
1253 /* Define this macro if references to a symbol must be treated | |
1254 differently depending on something about the variable or | |
1255 function named by the symbol (such as what section it is in). | |
1256 | |
1257 The macro definition, if any, is executed immediately after the | |
1258 rtl for DECL or other node is created. | |
1259 The value of the rtl will be a `mem' whose address is a | |
1260 `symbol_ref'. | |
1261 | |
1262 The usual thing for this macro to do is to a flag in the | |
1263 `symbol_ref' (such as `SYMBOL_REF_FLAG') or to store a modified | |
1264 name string in the `symbol_ref' (if one bit is not enough | |
1265 information). | |
1266 | |
1267 On the HP-PA we use this to indicate if a symbol is in text or | |
1268 data space. Also, function labels need special treatment. */ | |
1269 | |
1270 #define TEXT_SPACE_P(DECL)\ | |
1271 (TREE_CODE (DECL) == FUNCTION_DECL \ | |
1272 || (TREE_CODE (DECL) == VAR_DECL \ | |
1273 && TREE_READONLY (DECL) && ! TREE_SIDE_EFFECTS (DECL) \ | |
1274 && (! DECL_INITIAL (DECL) || ! reloc_needed (DECL_INITIAL (DECL))) \ | |
1275 && !flag_pic) \ | |
1276 || CONSTANT_CLASS_P (DECL)) | |
1277 | |
1278 #define FUNCTION_NAME_P(NAME) (*(NAME) == '@') | |
1279 | |
1280 /* Specify the machine mode that this machine uses for the index in the | |
1281 tablejump instruction. For small tables, an element consists of a | |
1282 ia-relative branch and its delay slot. When -mbig-switch is specified, | |
1283 we use a 32-bit absolute address for non-pic code, and a 32-bit offset | |
1284 for both 32 and 64-bit pic code. */ | |
1285 #define CASE_VECTOR_MODE (TARGET_BIG_SWITCH ? SImode : DImode) | |
1286 | |
1287 /* Jump tables must be 32-bit aligned, no matter the size of the element. */ | |
1288 #define ADDR_VEC_ALIGN(ADDR_VEC) 2 | |
1289 | |
1290 /* Define this as 1 if `char' should by default be signed; else as 0. */ | |
1291 #define DEFAULT_SIGNED_CHAR 1 | |
1292 | |
1293 /* Max number of bytes we can move from memory to memory | |
1294 in one reasonably fast instruction. */ | |
1295 #define MOVE_MAX 8 | |
1296 | |
1297 /* Higher than the default as we prefer to use simple move insns | |
1298 (better scheduling and delay slot filling) and because our | |
1299 built-in block move is really a 2X unrolled loop. | |
1300 | |
1301 Believe it or not, this has to be big enough to allow for copying all | |
1302 arguments passed in registers to avoid infinite recursion during argument | |
1303 setup for a function call. Why? Consider how we copy the stack slots | |
1304 reserved for parameters when they may be trashed by a call. */ | |
1305 #define MOVE_RATIO(speed) (TARGET_64BIT ? 8 : 4) | |
1306 | |
1307 /* Define if operations between registers always perform the operation | |
1308 on the full register even if a narrower mode is specified. */ | |
1309 #define WORD_REGISTER_OPERATIONS | |
1310 | |
1311 /* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD | |
1312 will either zero-extend or sign-extend. The value of this macro should | |
1313 be the code that says which one of the two operations is implicitly | |
1314 done, UNKNOWN if none. */ | |
1315 #define LOAD_EXTEND_OP(MODE) ZERO_EXTEND | |
1316 | |
1317 /* Nonzero if access to memory by bytes is slow and undesirable. */ | |
1318 #define SLOW_BYTE_ACCESS 1 | |
1319 | |
1320 /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits | |
1321 is done just by pretending it is already truncated. */ | |
1322 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1 | |
1323 | |
1324 /* Specify the machine mode that pointers have. | |
1325 After generation of rtl, the compiler makes no further distinction | |
1326 between pointers and any other objects of this machine mode. */ | |
1327 #define Pmode word_mode | |
1328 | |
1329 /* Given a comparison code (EQ, NE, etc.) and the first operand of a COMPARE, | |
1330 return the mode to be used for the comparison. For floating-point, CCFPmode | |
1331 should be used. CC_NOOVmode should be used when the first operand is a | |
1332 PLUS, MINUS, or NEG. CCmode should be used when no special processing is | |
1333 needed. */ | |
1334 #define SELECT_CC_MODE(OP,X,Y) \ | |
1335 (GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT ? CCFPmode : CCmode) \ | |
1336 | |
1337 /* A function address in a call instruction | |
1338 is a byte address (for indexing purposes) | |
1339 so give the MEM rtx a byte's mode. */ | |
1340 #define FUNCTION_MODE SImode | |
1341 | |
1342 /* Define this if addresses of constant functions | |
1343 shouldn't be put through pseudo regs where they can be cse'd. | |
1344 Desirable on machines where ordinary constants are expensive | |
1345 but a CALL with constant address is cheap. */ | |
1346 #define NO_FUNCTION_CSE | |
1347 | |
1348 /* Define this to be nonzero if shift instructions ignore all but the low-order | |
1349 few bits. */ | |
1350 #define SHIFT_COUNT_TRUNCATED 1 | |
1351 | |
1352 /* Compute extra cost of moving data between one register class | |
1353 and another. | |
1354 | |
1355 Make moves from SAR so expensive they should never happen. We used to | |
1356 have 0xffff here, but that generates overflow in rare cases. | |
1357 | |
1358 Copies involving a FP register and a non-FP register are relatively | |
1359 expensive because they must go through memory. | |
1360 | |
1361 Other copies are reasonably cheap. */ | |
1362 #define REGISTER_MOVE_COST(MODE, CLASS1, CLASS2) \ | |
1363 (CLASS1 == SHIFT_REGS ? 0x100 \ | |
1364 : FP_REG_CLASS_P (CLASS1) && ! FP_REG_CLASS_P (CLASS2) ? 16 \ | |
1365 : FP_REG_CLASS_P (CLASS2) && ! FP_REG_CLASS_P (CLASS1) ? 16 \ | |
1366 : 2) | |
1367 | |
1368 /* Adjust the cost of branches. */ | |
1369 #define BRANCH_COST(speed_p, predictable_p) (pa_cpu == PROCESSOR_8000 ? 2 : 1) | |
1370 | |
1371 /* Handling the special cases is going to get too complicated for a macro, | |
1372 just call `pa_adjust_insn_length' to do the real work. */ | |
1373 #define ADJUST_INSN_LENGTH(INSN, LENGTH) \ | |
1374 LENGTH += pa_adjust_insn_length (INSN, LENGTH); | |
1375 | |
1376 /* Millicode insns are actually function calls with some special | |
1377 constraints on arguments and register usage. | |
1378 | |
1379 Millicode calls always expect their arguments in the integer argument | |
1380 registers, and always return their result in %r29 (ret1). They | |
1381 are expected to clobber their arguments, %r1, %r29, and the return | |
1382 pointer which is %r31 on 32-bit and %r2 on 64-bit, and nothing else. | |
1383 | |
1384 This macro tells reorg that the references to arguments and | |
1385 millicode calls do not appear to happen until after the millicode call. | |
1386 This allows reorg to put insns which set the argument registers into the | |
1387 delay slot of the millicode call -- thus they act more like traditional | |
1388 CALL_INSNs. | |
1389 | |
1390 Note we cannot consider side effects of the insn to be delayed because | |
1391 the branch and link insn will clobber the return pointer. If we happened | |
1392 to use the return pointer in the delay slot of the call, then we lose. | |
1393 | |
1394 get_attr_type will try to recognize the given insn, so make sure to | |
1395 filter out things it will not accept -- SEQUENCE, USE and CLOBBER insns | |
1396 in particular. */ | |
1397 #define INSN_REFERENCES_ARE_DELAYED(X) (insn_refs_are_delayed (X)) | |
1398 | |
1399 | |
1400 /* Control the assembler format that we output. */ | |
1401 | |
1402 /* A C string constant describing how to begin a comment in the target | |
1403 assembler language. The compiler assumes that the comment will end at | |
1404 the end of the line. */ | |
1405 | |
1406 #define ASM_COMMENT_START ";" | |
1407 | |
1408 /* Output to assembler file text saying following lines | |
1409 may contain character constants, extra white space, comments, etc. */ | |
1410 | |
1411 #define ASM_APP_ON "" | |
1412 | |
1413 /* Output to assembler file text saying following lines | |
1414 no longer contain unusual constructs. */ | |
1415 | |
1416 #define ASM_APP_OFF "" | |
1417 | |
1418 /* This is how to output the definition of a user-level label named NAME, | |
1419 such as the label on a static function or variable NAME. */ | |
1420 | |
1421 #define ASM_OUTPUT_LABEL(FILE,NAME) \ | |
1422 do { \ | |
1423 assemble_name ((FILE), (NAME)); \ | |
1424 if (TARGET_GAS) \ | |
1425 fputs (":\n", (FILE)); \ | |
1426 else \ | |
1427 fputc ('\n', (FILE)); \ | |
1428 } while (0) | |
1429 | |
1430 /* This is how to output a reference to a user-level label named NAME. | |
1431 `assemble_name' uses this. */ | |
1432 | |
1433 #define ASM_OUTPUT_LABELREF(FILE,NAME) \ | |
1434 do { \ | |
1435 const char *xname = (NAME); \ | |
1436 if (FUNCTION_NAME_P (NAME)) \ | |
1437 xname += 1; \ | |
1438 if (xname[0] == '*') \ | |
1439 xname += 1; \ | |
1440 else \ | |
1441 fputs (user_label_prefix, FILE); \ | |
1442 fputs (xname, FILE); \ | |
1443 } while (0) | |
1444 | |
1445 /* This how we output the symbol_ref X. */ | |
1446 | |
1447 #define ASM_OUTPUT_SYMBOL_REF(FILE,X) \ | |
1448 do { \ | |
1449 SYMBOL_REF_FLAGS (X) |= SYMBOL_FLAG_REFERENCED; \ | |
1450 assemble_name (FILE, XSTR (X, 0)); \ | |
1451 } while (0) | |
1452 | |
1453 /* This is how to store into the string LABEL | |
1454 the symbol_ref name of an internal numbered label where | |
1455 PREFIX is the class of label and NUM is the number within the class. | |
1456 This is suitable for output with `assemble_name'. */ | |
1457 | |
1458 #define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \ | |
1459 sprintf (LABEL, "*%c$%s%04ld", (PREFIX)[0], (PREFIX) + 1, (long)(NUM)) | |
1460 | |
1461 /* Output the definition of a compiler-generated label named NAME. */ | |
1462 | |
1463 #define ASM_OUTPUT_INTERNAL_LABEL(FILE,NAME) \ | |
1464 do { \ | |
1465 assemble_name_raw ((FILE), (NAME)); \ | |
1466 if (TARGET_GAS) \ | |
1467 fputs (":\n", (FILE)); \ | |
1468 else \ | |
1469 fputc ('\n', (FILE)); \ | |
1470 } while (0) | |
1471 | |
1472 #define TARGET_ASM_GLOBALIZE_LABEL pa_globalize_label | |
1473 | |
1474 #define ASM_OUTPUT_ASCII(FILE, P, SIZE) \ | |
1475 output_ascii ((FILE), (P), (SIZE)) | |
1476 | |
1477 /* Jump tables are always placed in the text section. Technically, it | |
1478 is possible to put them in the readonly data section when -mbig-switch | |
1479 is specified. This has the benefit of getting the table out of .text | |
1480 and reducing branch lengths as a result. The downside is that an | |
1481 additional insn (addil) is needed to access the table when generating | |
1482 PIC code. The address difference table also has to use 32-bit | |
1483 pc-relative relocations. Currently, GAS does not support these | |
1484 relocations, although it is easily modified to do this operation. | |
1485 The table entries need to look like "$L1+(.+8-$L0)-$PIC_pcrel$0" | |
1486 when using ELF GAS. A simple difference can be used when using | |
1487 SOM GAS or the HP assembler. The final downside is GDB complains | |
1488 about the nesting of the label for the table when debugging. */ | |
1489 | |
1490 #define JUMP_TABLES_IN_TEXT_SECTION 1 | |
1491 | |
1492 /* This is how to output an element of a case-vector that is absolute. */ | |
1493 | |
1494 #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ | |
1495 if (TARGET_BIG_SWITCH) \ | |
1496 fprintf (FILE, "\t.word L$%04d\n", VALUE); \ | |
1497 else \ | |
1498 fprintf (FILE, "\tb L$%04d\n\tnop\n", VALUE) | |
1499 | |
1500 /* This is how to output an element of a case-vector that is relative. | |
1501 Since we always place jump tables in the text section, the difference | |
1502 is absolute and requires no relocation. */ | |
1503 | |
1504 #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \ | |
1505 if (TARGET_BIG_SWITCH) \ | |
1506 fprintf (FILE, "\t.word L$%04d-L$%04d\n", VALUE, REL); \ | |
1507 else \ | |
1508 fprintf (FILE, "\tb L$%04d\n\tnop\n", VALUE) | |
1509 | |
1510 /* This is how to output an assembler line that says to advance the | |
1511 location counter to a multiple of 2**LOG bytes. */ | |
1512 | |
1513 #define ASM_OUTPUT_ALIGN(FILE,LOG) \ | |
1514 fprintf (FILE, "\t.align %d\n", (1<<(LOG))) | |
1515 | |
1516 #define ASM_OUTPUT_SKIP(FILE,SIZE) \ | |
1517 fprintf (FILE, "\t.blockz "HOST_WIDE_INT_PRINT_UNSIGNED"\n", \ | |
1518 (unsigned HOST_WIDE_INT)(SIZE)) | |
1519 | |
1520 /* This says how to output an assembler line to define an uninitialized | |
1521 global variable with size SIZE (in bytes) and alignment ALIGN (in bits). | |
1522 This macro exists to properly support languages like C++ which do not | |
1523 have common data. */ | |
1524 | |
1525 #define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \ | |
1526 pa_asm_output_aligned_bss (FILE, NAME, SIZE, ALIGN) | |
1527 | |
1528 /* This says how to output an assembler line to define a global common symbol | |
1529 with size SIZE (in bytes) and alignment ALIGN (in bits). */ | |
1530 | |
1531 #define ASM_OUTPUT_ALIGNED_COMMON(FILE, NAME, SIZE, ALIGN) \ | |
1532 pa_asm_output_aligned_common (FILE, NAME, SIZE, ALIGN) | |
1533 | |
1534 /* This says how to output an assembler line to define a local common symbol | |
1535 with size SIZE (in bytes) and alignment ALIGN (in bits). This macro | |
1536 controls how the assembler definitions of uninitialized static variables | |
1537 are output. */ | |
1538 | |
1539 #define ASM_OUTPUT_ALIGNED_LOCAL(FILE, NAME, SIZE, ALIGN) \ | |
1540 pa_asm_output_aligned_local (FILE, NAME, SIZE, ALIGN) | |
1541 | |
1542 /* All HP assemblers use "!" to separate logical lines. */ | |
1543 #define IS_ASM_LOGICAL_LINE_SEPARATOR(C, STR) ((C) == '!') | |
1544 | |
1545 #define PRINT_OPERAND_PUNCT_VALID_P(CHAR) \ | |
1546 ((CHAR) == '@' || (CHAR) == '#' || (CHAR) == '*' || (CHAR) == '^') | |
1547 | |
1548 /* Print operand X (an rtx) in assembler syntax to file FILE. | |
1549 CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified. | |
1550 For `%' followed by punctuation, CODE is the punctuation and X is null. | |
1551 | |
1552 On the HP-PA, the CODE can be `r', meaning this is a register-only operand | |
1553 and an immediate zero should be represented as `r0'. | |
1554 | |
1555 Several % codes are defined: | |
1556 O an operation | |
1557 C compare conditions | |
1558 N extract conditions | |
1559 M modifier to handle preincrement addressing for memory refs. | |
1560 F modifier to handle preincrement addressing for fp memory refs */ | |
1561 | |
1562 #define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE) | |
1563 | |
1564 | |
1565 /* Print a memory address as an operand to reference that memory location. */ | |
1566 | |
1567 #define PRINT_OPERAND_ADDRESS(FILE, ADDR) \ | |
1568 { rtx addr = ADDR; \ | |
1569 switch (GET_CODE (addr)) \ | |
1570 { \ | |
1571 case REG: \ | |
1572 fprintf (FILE, "0(%s)", reg_names [REGNO (addr)]); \ | |
1573 break; \ | |
1574 case PLUS: \ | |
1575 gcc_assert (GET_CODE (XEXP (addr, 1)) == CONST_INT); \ | |
1576 fprintf (FILE, "%d(%s)", (int)INTVAL (XEXP (addr, 1)), \ | |
1577 reg_names [REGNO (XEXP (addr, 0))]); \ | |
1578 break; \ | |
1579 case LO_SUM: \ | |
1580 if (!symbolic_operand (XEXP (addr, 1), VOIDmode)) \ | |
1581 fputs ("R'", FILE); \ | |
1582 else if (flag_pic == 0) \ | |
1583 fputs ("RR'", FILE); \ | |
1584 else \ | |
1585 fputs ("RT'", FILE); \ | |
1586 output_global_address (FILE, XEXP (addr, 1), 0); \ | |
1587 fputs ("(", FILE); \ | |
1588 output_operand (XEXP (addr, 0), 0); \ | |
1589 fputs (")", FILE); \ | |
1590 break; \ | |
1591 case CONST_INT: \ | |
1592 fprintf (FILE, HOST_WIDE_INT_PRINT_DEC "(%%r0)", INTVAL (addr)); \ | |
1593 break; \ | |
1594 default: \ | |
1595 output_addr_const (FILE, addr); \ | |
1596 }} | |
1597 | |
1598 | |
1599 /* Find the return address associated with the frame given by | |
1600 FRAMEADDR. */ | |
1601 #define RETURN_ADDR_RTX(COUNT, FRAMEADDR) \ | |
1602 (return_addr_rtx (COUNT, FRAMEADDR)) | |
1603 | |
1604 /* Used to mask out junk bits from the return address, such as | |
1605 processor state, interrupt status, condition codes and the like. */ | |
1606 #define MASK_RETURN_ADDR \ | |
1607 /* The privilege level is in the two low order bits, mask em out \ | |
1608 of the return address. */ \ | |
1609 (GEN_INT (-4)) | |
1610 | |
1611 /* The number of Pmode words for the setjmp buffer. */ | |
1612 #define JMP_BUF_SIZE 50 | |
1613 | |
1614 /* We need a libcall to canonicalize function pointers on TARGET_ELF32. */ | |
1615 #define CANONICALIZE_FUNCPTR_FOR_COMPARE_LIBCALL \ | |
1616 "__canonicalize_funcptr_for_compare" | |
1617 | |
1618 #ifdef HAVE_AS_TLS | |
1619 #undef TARGET_HAVE_TLS | |
1620 #define TARGET_HAVE_TLS true | |
1621 #endif |