diff configure @ 111:04ced10e8804

gcc 7
author kono
date Fri, 27 Oct 2017 22:46:09 +0900
parents f6334be47118
children ab0bcb71f44d 84e7813d76e9
line wrap: on
line diff
--- a/configure	Sun Aug 21 07:07:55 2011 +0900
+++ b/configure	Fri Oct 27 22:46:09 2017 +0900
@@ -570,8 +570,10 @@
 WINDMC_FOR_TARGET
 WINDRES_FOR_TARGET
 STRIP_FOR_TARGET
+READELF_FOR_TARGET
 RANLIB_FOR_TARGET
 OBJDUMP_FOR_TARGET
+OBJCOPY_FOR_TARGET
 NM_FOR_TARGET
 LIPO_FOR_TARGET
 LD_FOR_TARGET
@@ -580,10 +582,10 @@
 AR_FOR_TARGET
 GOC_FOR_TARGET
 GFORTRAN_FOR_TARGET
-GCJ_FOR_TARGET
 GCC_FOR_TARGET
 CXX_FOR_TARGET
 CC_FOR_TARGET
+READELF
 OBJDUMP
 OBJCOPY
 WINDMC
@@ -604,7 +606,6 @@
 M4
 BISON
 YACC
-config_shell
 WINDRES_FOR_BUILD
 WINDMC_FOR_BUILD
 RANLIB_FOR_BUILD
@@ -613,7 +614,6 @@
 LDFLAGS_FOR_BUILD
 GOC_FOR_BUILD
 GFORTRAN_FOR_BUILD
-GCJ_FOR_BUILD
 DLLTOOL_FOR_BUILD
 CXX_FOR_BUILD
 CXXFLAGS_FOR_BUILD
@@ -635,20 +635,25 @@
 host_configargs
 build_configargs
 BUILD_CONFIG
+LDFLAGS_FOR_TARGET
 CXXFLAGS_FOR_TARGET
 CFLAGS_FOR_TARGET
 DEBUG_PREFIX_CFLAGS_FOR_TARGET
 SYSROOT_CFLAGS_FOR_TARGET
-stage1_languages
+get_gcc_base_ver
+extra_host_zlib_configure_flags
 extra_host_libiberty_configure_flags
-clooginc
-clooglibs
-pplinc
-ppllibs
+stage1_languages
+host_shared
+extra_linker_plugin_flags
+extra_linker_plugin_configure_flags
+islinc
+isllibs
 poststage1_ldflags
 poststage1_libs
+stage1_ldflags
 stage1_libs
-stage1_ldflags
+extra_isl_gmp_configure_flags
 extra_mpc_mpfr_configure_flags
 extra_mpc_gmp_configure_flags
 extra_mpfr_configure_flags
@@ -667,6 +672,7 @@
 LDFLAGS
 CFLAGS
 CC
+extra_liboffloadmic_configure_flags
 target_subdir
 host_subdir
 build_subdir
@@ -740,13 +746,19 @@
 ac_user_opts='
 enable_option_checking
 with_build_libsubdir
+with_system_zlib
+enable_as_accelerator_for
+enable_offload_targets
 enable_gold
 enable_ld
+enable_compressed_debug_sections
 enable_libquadmath
 enable_libquadmath_support
 enable_libada
 enable_libssp
-enable_build_with_cxx
+enable_libstdcxx
+enable_liboffloadmic
+enable_bootstrap
 with_mpc
 with_mpc_include
 with_mpc_lib
@@ -758,27 +770,28 @@
 with_gmp
 with_gmp_include
 with_gmp_lib
-with_host_libstdcxx
+with_stage1_libs
 with_stage1_ldflags
-with_stage1_libs
 with_boot_libs
 with_boot_ldflags
-with_ppl
-with_ppl_include
-with_ppl_lib
-enable_ppl_version_check
-with_cloog
-with_cloog_include
-with_cloog_lib
-enable_cloog_backend
-enable_cloog_version_check
+with_isl
+with_isl_include
+with_isl_lib
+enable_isl_version_check
 enable_lto
+enable_linker_plugin_configure_flags
+enable_linker_plugin_flags
+enable_host_shared
 enable_stage1_languages
 enable_objc_gc
+with_target_bdw_gc
+with_target_bdw_gc_include
+with_target_bdw_gc_lib
+with_gcc_major_version_only
 with_build_sysroot
 with_debug_prefix_map
-enable_bootstrap
 with_build_config
+enable_vtable_verify
 enable_serial_configure
 with_build_time_tools
 enable_maintainer_mode
@@ -811,10 +824,10 @@
 WINDMC
 OBJCOPY
 OBJDUMP
+READELF
 CC_FOR_TARGET
 CXX_FOR_TARGET
 GCC_FOR_TARGET
-GCJ_FOR_TARGET
 GFORTRAN_FOR_TARGET
 GOC_FOR_TARGET
 AR_FOR_TARGET
@@ -823,8 +836,10 @@
 LD_FOR_TARGET
 LIPO_FOR_TARGET
 NM_FOR_TARGET
+OBJCOPY_FOR_TARGET
 OBJDUMP_FOR_TARGET
 RANLIB_FOR_TARGET
+READELF_FOR_TARGET
 STRIP_FOR_TARGET
 WINDRES_FOR_TARGET
 WINDMC_FOR_TARGET'
@@ -1453,28 +1468,43 @@
   --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-as-accelerator-for=ARG
+                          build as offload target compiler. Specify offload
+                          host triple by ARG
+  --enable-offload-targets=LIST
+                          enable offloading to devices from comma-separated
+                          LIST of TARGET[=DIR]. Use optional path to find
+                          offload target compiler during the build
   --enable-gold[=ARG]     build gold [ARG={default,yes,no}]
   --enable-ld[=ARG]       build ld [ARG={default,yes,no}]
+  --enable-compressed-debug-sections={all,gas,gold,ld,none}
+                          Enable compressed debug sections for gas, gold or ld
+                          by default
   --disable-libquadmath   do not build libquadmath directory
   --disable-libquadmath-support
                           disable libquadmath support for Fortran
   --enable-libada         build libada directory
   --enable-libssp         build libssp directory
-  --enable-build-with-cxx build with C++ compiler instead of C compiler
-  --disable-ppl-version-check
-                          disable check for PPL version
-  --enable-cloog-backend[=BACKEND]
-                          set the CLooG BACKEND used to either isl, ppl or
-                          ppl-legacy (default)
-  --disable-cloog-version-check
-                          disable check for CLooG version
+  --disable-libstdcxx     do not build libstdc++-v3 directory
+  --enable-liboffloadmic=ARG
+                          build liboffloadmic [ARG={no,host,target}]
+  --enable-bootstrap      enable bootstrapping [yes if native build]
+  --disable-isl-version-check
+                          disable check for isl version
   --enable-lto            enable link time optimization support
+  --enable-linker-plugin-configure-flags=FLAGS
+                          additional flags for configuring linker plugins
+                          [none]
+  --enable-linker-plugin-flags=FLAGS
+                          additional flags for configuring and building linker
+                          plugins [none]
+  --enable-host-shared    build host code as shared libraries
   --enable-stage1-languages[=all]
                           choose additional languages to build during stage1.
                           Mostly useful for compiler development
   --enable-objc-gc        enable use of Boehm's garbage collector with the GNU
                           Objective-C runtime
-  --enable-bootstrap      enable bootstrapping [yes if native build]
+  --enable-vtable-verify  Enable vtable verification feature
   --enable-serial-[{host,target,build}-]configure
                           force sequential configuration of sub-packages for
                           the host, target or build machine, or all
@@ -1491,6 +1521,7 @@
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
   --with-build-libsubdir=DIR  Directory where to find libraries for build system
+  --with-system-zlib      use installed libz
   --with-mpc=PATH         specify prefix directory for installed MPC package.
                           Equivalent to --with-mpc-include=PATH/include plus
                           --with-mpc-lib=PATH/lib
@@ -1510,28 +1541,30 @@
                           --with-gmp-lib=PATH/lib
   --with-gmp-include=PATH specify directory for installed GMP include files
   --with-gmp-lib=PATH     specify directory for the installed GMP library
-  --with-host-libstdcxx=L use linker arguments L to link with libstdc++ when
-                          linking with PPL
+  --with-stage1-libs=LIBS libraries for stage1
   --with-stage1-ldflags=FLAGS
                           linker flags for stage1
-  --with-stage1-libs=LIBS libraries for stage1
   --with-boot-libs=LIBS   libraries for stage2 and later
   --with-boot-ldflags=FLAGS
                           linker flags for stage2 and later
-  --with-ppl=PATH         specify prefix directory for the installed PPL
+  --with-isl=PATH         Specify prefix directory for the installed isl
+                          package. Equivalent to
+                          --with-isl-include=PATH/include plus
+                          --with-isl-lib=PATH/lib
+  --with-isl-include=PATH Specify directory for installed isl include files
+  --with-isl-lib=PATH     Specify the directory for the installed isl library
+  --with-target-bdw-gc=PATHLIST
+                          specify prefix directory for installed bdw-gc
                           package. Equivalent to
-                          --with-ppl-include=PATH/include plus
-                          --with-ppl-lib=PATH/lib
-  --with-ppl-include=PATH specify directory for installed PPL include files
-  --with-ppl-lib=PATH     specify directory for the installed PPL library
-  --with-cloog=PATH       Specify prefix directory for the installed CLooG-PPL
-                          package. Equivalent to
-                          --with-cloog-include=PATH/include plus
-                          --with-cloog-lib=PATH/lib
-  --with-cloog-include=PATH
-                          Specify directory for installed CLooG include files
-  --with-cloog-lib=PATH   Specify the directory for the installed CLooG
-                          library
+                          --with-target-bdw-gc-include=PATH/include plus
+                          --with-target-bdw-gc-lib=PATH/lib
+  --with-target-bdw-gc-include=PATHLIST
+                          specify directories for installed bdw-gc include
+                          files
+  --with-target-bdw-gc-lib=PATHLIST
+                          specify directories for installed bdw-gc library
+  --with-gcc-major-version-only
+                          use only GCC major number in filesystem paths
   --with-build-sysroot=SYSROOT
                           use sysroot as the system root during the build
   --with-debug-prefix-map='A=B C=D ...'
@@ -1569,14 +1602,13 @@
   WINDMC      WINDMC for the host
   OBJCOPY     OBJCOPY for the host
   OBJDUMP     OBJDUMP for the host
+  READELF     READELF for the host
   CC_FOR_TARGET
               CC for the target
   CXX_FOR_TARGET
               CXX for the target
   GCC_FOR_TARGET
               GCC for the target
-  GCJ_FOR_TARGET
-              GCJ for the target
   GFORTRAN_FOR_TARGET
               GFORTRAN for the target
   GOC_FOR_TARGET
@@ -1593,10 +1625,14 @@
               LIPO for the target
   NM_FOR_TARGET
               NM for the target
+  OBJCOPY_FOR_TARGET
+              OBJCOPY for the target
   OBJDUMP_FOR_TARGET
               OBJDUMP for the target
   RANLIB_FOR_TARGET
               RANLIB for the target
+  READELF_FOR_TARGET
+              READELF for the target
   STRIP_FOR_TARGET
               STRIP for the target
   WINDRES_FOR_TARGET
@@ -1760,6 +1796,52 @@
 
 } # ac_fn_cxx_try_compile
 
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
+
+} # ac_fn_cxx_try_link
+
 # ac_fn_c_try_link LINENO
 # -----------------------
 # Try to link conftest.$ac_ext, and return whether this succeeded.
@@ -2608,42 +2690,6 @@
 done
 
 
-### we might need to use some other shell than /bin/sh for running subshells
-### If we are on Windows, search for the shell.  This will permit people
-### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
-### without also having to set CONFIG_SHELL.  This code will work when
-### using bash, which sets OSTYPE.
-case "${OSTYPE}" in
-*win32*)
-  if test x${CONFIG_SHELL} = x ; then
-    if test ! -f /bin/sh ; then
-      if test x${SHELL} != x && test -f ${SHELL} ; then
-	CONFIG_SHELL=${SHELL}
-	export CONFIG_SHELL
-      else
-	for prog in sh sh.exe bash bash.exe; do
-	  IFS="${IFS=	}"; save_ifs="$IFS"; IFS="${IFS}:"
-	  for dir in $PATH; do
-	    test -z "$dir" && dir=.
-	    if test -f $dir/$prog; then
-	      CONFIG_SHELL=$dir/$prog
-	      export CONFIG_SHELL
-	      break
-	    fi
-	  done
-	  IFS="$save_ifs"
-	  test -n "${CONFIG_SHELL}" && break
-	done
-      fi
-    fi
-  fi
-  ;;
-esac
-
-config_shell=${CONFIG_SHELL-/bin/sh}
-
-moveifchange=${srcdir}/move-if-change
-
 srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
 
 # We pass INSTALL explicitly to sub-makes.  Make sure that it is not
@@ -2680,14 +2726,14 @@
 # these library is used by various programs built for the build
 # environment
 #
-build_libs="build-libiberty"
+build_libs="build-libiberty build-libcpp"
 
 # these tools are built for the build environment
-build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes"
+build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
 
 # these libraries are used by various programs built for the host environment
-#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
+#f
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl libelf libiconv"
 
 # these tools are built for the host environment
 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
@@ -2695,29 +2741,29 @@
 # binutils, gas and ld appear in that order because it makes sense to run
 # "make check" in that particular order.
 # If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc cgen sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
-
-# libgcj represents the runtime libraries only used by gcj.
-libgcj="target-libffi \
-	target-zlib \
-	target-qthreads \
-	target-libjava"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gotools"
 
 # these libraries are built for the target environment, and are built after
 # the host libraries and the host tools (which may be a cross compiler)
-#
+# Note that libiberty is not a target library.
 target_libraries="target-libgcc \
-		target-libiberty \
+		target-libbacktrace \
 		target-libgloss \
 		target-newlib \
 		target-libgomp \
+		target-libcilkrts \
+		target-liboffloadmic \
+		target-libhsail-rt \
+		target-libatomic \
+		target-libitm \
 		target-libstdc++-v3 \
-		target-libmudflap \
+		target-libsanitizer \
+		target-libvtv \
+		target-libmpx \
 		target-libssp \
 		target-libquadmath \
 		target-libgfortran \
-		target-boehm-gc \
-		${libgcj} \
+		target-libffi \
 		target-libobjc \
 		target-libada \
 		target-libgo"
@@ -2726,10 +2772,9 @@
 # run only in the target environment
 #
 # note: any program that *uses* libraries that are in the "target_libraries"
-# list belongs in this list.  those programs are also very likely
-# candidates for the "native_only" list which follows
+# list belongs in this list.
 #
-target_tools="target-examples target-groff target-gperf target-rda"
+target_tools="target-rda"
 
 ################################################################################
 
@@ -2816,6 +2861,12 @@
 fi
 
 use_included_zlib=
+
+# Check whether --with-system-zlib was given.
+if test "${with_system_zlib+set}" = set; then :
+  withval=$with_system_zlib;
+fi
+
 # Make sure we don't let ZLIB be added if we didn't want it.
 if test x$with_system_zlib = xyes ; then
   use_included_zlib=no
@@ -2835,17 +2886,12 @@
   *)  echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
 esac
 
-# Some tools are only suitable for building in a "native" situation.
-# Remove these if host!=target.
-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
-
-# Similarly, some are only suitable for cross toolchains.
+# Some are only suitable for cross toolchains.
 # Remove these if host=target.
 cross_only="target-libgloss target-newlib target-opcodes"
 
 case $is_cross_compiler in
   no) skipdirs="${skipdirs} ${cross_only}" ;;
-  yes) skipdirs="${skipdirs} ${native_only}" ;;
 esac
 
 # If both --with-headers and --with-libs are specified, default to
@@ -2863,6 +2909,24 @@
   yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
 esac
 
+# Check whether --enable-as-accelerator-for was given.
+if test "${enable_as_accelerator_for+set}" = set; then :
+  enableval=$enable_as_accelerator_for;
+fi
+
+
+# Check whether --enable-offload-targets was given.
+if test "${enable_offload_targets+set}" = set; then :
+  enableval=$enable_offload_targets;
+  if test x"$enable_offload_targets" = x; then
+    as_fn_error "no offload targets specified" "$LINENO" 5
+  fi
+
+else
+  enable_offload_targets=
+fi
+
+
 # Handle --enable-gold, --enable-ld.
 # --disable-gold [--enable-ld]
 #     Build only ld.  Default option.
@@ -2895,8 +2959,9 @@
     is_elf=no
     case "${target}" in
       *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
-      | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
-      | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2* | *-*-nto*)
+      | *-*-linux* | *-*-gnu* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
+      | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
+      | *-*-solaris2* | *-*-nto* | *-*-nacl*)
         case "${target}" in
           *-*-linux*aout* | *-*-linux*oldld*)
             ;;
@@ -2909,7 +2974,8 @@
     if test "$is_elf" = "yes"; then
       # Check for target supported by gold.
       case "${target}" in
-        i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
+        i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* \
+        | aarch64*-*-* | tilegx*-*-* | mips*-*-* | s390*-*-*)
 	  configdirs="$configdirs gold"
 	  if test x${ENABLE_GOLD} = xdefault; then
 	    default_ld=gold
@@ -2954,6 +3020,21 @@
     ;;
 esac
 
+# PR gas/19109
+# Decide the default method for compressing debug sections.
+# Provide a configure time option to override our default.
+# Check whether --enable-compressed_debug_sections was given.
+if test "${enable_compressed_debug_sections+set}" = set; then :
+  enableval=$enable_compressed_debug_sections;
+  if test x"$enable_compressed_debug_sections" = xyes; then
+    as_fn_error "no program with compressed debug sections specified" "$LINENO" 5
+  fi
+
+else
+  enable_compressed_debug_sections=
+fi
+
+
 # Configure extra directories which are host specific
 
 case "${host}" in
@@ -2970,36 +3051,8 @@
 # exist yet.
 
 case "${host}" in
-  hppa*64*-*-*)
-    noconfigdirs="$noconfigdirs byacc"
-    ;;
-  i[3456789]86-*-vsta)
-    noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
-    ;;
-  i[3456789]86-*-go32* | i[3456789]86-*-msdosdjgpp*)
-    noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
-    ;;
-  x86_64-*-mingw*)
-    noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
-    ;;
-  i[3456789]86-*-mingw32*)
-    # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
-    noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
-    ;;
-  i[3456789]86-*-beos*)
-    noconfigdirs="$noconfigdirs tk itcl libgui gdb"
-    ;;
-  *-*-cygwin*)
-    noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
-    ;;
-  *-*-netbsd*)
-    noconfigdirs="$noconfigdirs rcs"
-    ;;
-  ppc*-*-pe)
-    noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
-    ;;
-  powerpc-*-beos*)
-    noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
+  i[3456789]86-*-msdosdjgpp*)
+    noconfigdirs="$noconfigdirs tcl tk itcl"
     ;;
 esac
 
@@ -3048,67 +3101,517 @@
 fi
 
 
-# Save it here so that, even in case of --enable-libgcj, if the Java
-# front-end isn't enabled, we still get libgcj disabled.
-libgcj_saved=$libgcj
-case $enable_libgcj in
-yes)
-  # If we reset it here, it won't get added to noconfigdirs in the
-  # target-specific build rules, so it will be forcibly enabled
-  # (unless the Java language itself isn't enabled).
-  libgcj=
-  ;;
-no)
-  # Make sure we get it printed in the list of not supported target libs.
-  # Don't disable libffi, though, other languages use it.
-  noconfigdirs="$noconfigdirs `echo ${libgcj} | sed -e 's/target-libffi//'`"
-  # Clear libgcj_saved so that even if java is enabled libffi won't be
-  # built.
-  libgcj_saved=
-  ;;
-esac
-
-
-# Disable libmudflap on some systems.
-if test x$enable_libmudflap = x ; then
-    case "${target}" in
-    *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | bfin*-*-uclinux* | *-*-kopensolaris*-gnu)
-        # Enable libmudflap by default in GNU and friends.
-	;;
-    *-*-freebsd*)
-        # Enable libmudflap by default in FreeBSD.
-	;;
+# Check whether --enable-libstdcxx was given.
+if test "${enable_libstdcxx+set}" = set; then :
+  enableval=$enable_libstdcxx; ENABLE_LIBSTDCXX=$enableval
+else
+  ENABLE_LIBSTDCXX=default
+fi
+
+if test "${ENABLE_LIBSTDCXX}" = "no" ; then
+  noconfigdirs="$noconfigdirs target-libstdc++-v3"
+fi
+
+# If this is accelerator compiler and its target is intelmic we enable
+# target liboffloadmic by default.  If this is compiler with offloading
+# for intelmic we enable host liboffloadmic by default.  Otherwise
+# liboffloadmic is disabled by default.
+# Check whether --enable-liboffloadmic was given.
+if test "${enable_liboffloadmic+set}" = set; then :
+  enableval=$enable_liboffloadmic; case "$enableval" in
+  no | host | target)
+    enable_liboffloadmic=$enableval ;;
+  *)
+    as_fn_error "--enable-liboffloadmic=no/host/target" "$LINENO" 5 ;;
+esac
+else
+  if test x"$enable_as_accelerator_for" != x; then
+  case "${target}" in
+    *-intelmic-* | *-intelmicemul-*)
+      enable_liboffloadmic=target
+      extra_liboffloadmic_configure_flags="--enable-liboffloadmic=target"
+      ;;
     *)
-        # Disable it by default everywhere else.
-	noconfigdirs="$noconfigdirs target-libmudflap"
-	;;
+      enable_liboffloadmic=no
+      ;;
+  esac
+else
+  case "${enable_offload_targets}" in
+    *-intelmic-* | *-intelmicemul-*)
+      enable_liboffloadmic=host
+      extra_liboffloadmic_configure_flags="--enable-liboffloadmic=host"
+      ;;
+    *)
+      enable_liboffloadmic=no
+      ;;
     esac
 fi
-
-# Disable libgomp on non POSIX hosted systems.
+fi
+
+
+
+# Enable libgomp by default on hosted POSIX systems, and a few others.
 if test x$enable_libgomp = x ; then
-    # Enable libgomp by default on hosted POSIX systems.
     case "${target}" in
     *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
 	;;
-    *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
+    *-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*)
 	;;
-    *-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
+    *-*-solaris2* | *-*-hpux11*)
 	;;
     *-*-darwin* | *-*-aix*)
 	;;
+    nvptx*-*-*)
+	;;
     *)
 	noconfigdirs="$noconfigdirs target-libgomp"
 	;;
     esac
 fi
 
+# Disable libatomic on unsupported systems.
+if test -d ${srcdir}/libatomic; then
+    if test x$enable_libatomic = x; then
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libatomic support" >&5
+$as_echo_n "checking for libatomic support... " >&6; }
+	if (srcdir=${srcdir}/libatomic; \
+		. ${srcdir}/configure.tgt; \
+		test -n "$UNSUPPORTED")
+	then
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+	    noconfigdirs="$noconfigdirs target-libatomic"
+	else
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	fi
+    fi
+fi
+
+# Disable libcilkrts on unsupported systems.
+if test -d ${srcdir}/libcilkrts; then
+    if test x$enable_libcilkrts = x; then
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libcilkrts support" >&5
+$as_echo_n "checking for libcilkrts support... " >&6; }
+	if (srcdir=${srcdir}/libcilkrts; \
+		. ${srcdir}/configure.tgt; \
+		test -n "$UNSUPPORTED")
+	then
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+	    noconfigdirs="$noconfigdirs target-libcilkrts"
+	else
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	fi
+    fi
+fi
+
+# Disable liboffloadmic on unsupported systems.
+if test -d ${srcdir}/liboffloadmic; then
+    if test x$enable_liboffloadmic != xno; then
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for liboffloadmic support" >&5
+$as_echo_n "checking for liboffloadmic support... " >&6; }
+	if (srcdir=${srcdir}/liboffloadmic; \
+		. ${srcdir}/configure.tgt; \
+		test -n "$UNSUPPORTED")
+	then
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+	    noconfigdirs="$noconfigdirs target-liboffloadmic"
+	else
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	fi
+    fi
+fi
+
+# Disable libitm on unsupported systems.
+if test -d ${srcdir}/libitm; then
+    if test x$enable_libitm = x; then
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libitm support" >&5
+$as_echo_n "checking for libitm support... " >&6; }
+	if (srcdir=${srcdir}/libitm; \
+		. ${srcdir}/configure.tgt; \
+		test -n "$UNSUPPORTED")
+	then
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+	    noconfigdirs="$noconfigdirs target-libitm"
+	else
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	fi
+    fi
+fi
+
+# Disable libsanitizer on unsupported systems.
+if test -d ${srcdir}/libsanitizer; then
+    if test x$enable_libsanitizer = x; then
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libsanitizer support" >&5
+$as_echo_n "checking for libsanitizer support... " >&6; }
+	if (srcdir=${srcdir}/libsanitizer; \
+		. ${srcdir}/configure.tgt; \
+		test -n "$UNSUPPORTED")
+	then
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+	    noconfigdirs="$noconfigdirs target-libsanitizer"
+	else
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	fi
+    fi
+fi
+
+# Disable libvtv on unsupported systems.
+if test -d ${srcdir}/libvtv; then
+    if test x$enable_libvtv = x; then
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libvtv support" >&5
+$as_echo_n "checking for libvtv support... " >&6; }
+	if (srcdir=${srcdir}/libvtv; \
+		. ${srcdir}/configure.tgt; \
+		test "$VTV_SUPPORTED" != "yes")
+	then
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+	    noconfigdirs="$noconfigdirs target-libvtv"
+	else
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	fi
+    fi
+fi
+
+
+# Enable libmpx on supported systems by request.
+if test -d ${srcdir}/libmpx; then
+    if test x$enable_libmpx = x; then
+       { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libmpx support" >&5
+$as_echo_n "checking for libmpx support... " >&6; }
+       if (srcdir=${srcdir}/libmpx; \
+               . ${srcdir}/configure.tgt; \
+               test "$LIBMPX_SUPPORTED" != "yes")
+       then
+           { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+           noconfigdirs="$noconfigdirs target-libmpx"
+       else
+           { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+       fi
+    fi
+fi
+
+# Disable libhsail-rt on unsupported systems.
+if test -d ${srcdir}/libhsail-rt; then
+    if test x$enable_libhsail_rt = x; then
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libhsail-rt support" >&5
+$as_echo_n "checking for libhsail-rt support... " >&6; }
+        if (srcdir=${srcdir}/libhsail-rt; \
+                . ${srcdir}/configure.tgt; \
+                test -n "$UNSUPPORTED")
+        then
+            { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+            unsupported_languages="$unsupported_languages brig"
+            # This implicitly disables also target-libhsail-rt as it won't
+            # get added to the build without BRIG FE.
+        else
+            { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+        fi
+    fi
+fi
+
+
+# Disable libquadmath for some systems.
+case "${target}" in
+  avr-*-*)
+    noconfigdirs="$noconfigdirs target-libquadmath"
+    ;;
+  # libquadmath is unused on AIX and libquadmath build process use of
+  # LD_LIBRARY_PATH can break AIX bootstrap.
+  powerpc-*-aix* | rs6000-*-aix*)
+    noconfigdirs="$noconfigdirs target-libquadmath"
+    ;;
+esac
+
+# Disable libssp for some systems.
+case "${target}" in
+  avr-*-*)
+    # No hosted I/O support.
+    noconfigdirs="$noconfigdirs target-libssp"
+    ;;
+  powerpc-*-aix* | rs6000-*-aix*)
+    noconfigdirs="$noconfigdirs target-libssp"
+    ;;
+  rl78-*-*)
+    # libssp uses a misaligned load to trigger a fault, but the RL78
+    # doesn't fault for those - instead, it gives a build-time error
+    # for explicit misaligned loads.
+    noconfigdirs="$noconfigdirs target-libssp"
+    ;;
+  visium-*-*)
+    # No hosted I/O support.
+    noconfigdirs="$noconfigdirs target-libssp"
+    ;;
+esac
+
+# Disable libstdc++-v3 for some systems.
+# Allow user to override this if they pass --enable-libstdc++-v3
+if test "${ENABLE_LIBSTDCXX}" = "default" ; then
+  case "${target}" in
+    *-*-vxworks*)
+      # VxWorks uses the Dinkumware C++ library.
+      noconfigdirs="$noconfigdirs target-libstdc++-v3"
+      ;;
+    arm*-wince-pe*)
+      # the C++ libraries don't build on top of CE's C libraries
+      noconfigdirs="$noconfigdirs target-libstdc++-v3"
+      ;;
+    avr-*-*)
+      noconfigdirs="$noconfigdirs target-libstdc++-v3"
+      ;;
+    ft32-*-*)
+      noconfigdirs="$noconfigdirs target-libstdc++-v3"
+      ;;
+  esac
+fi
+
+# Disable Fortran for some systems.
+case "${target}" in
+  mmix-*-*)
+    # See <http://gcc.gnu.org/ml/gcc-patches/2004-11/msg00572.html>.
+    unsupported_languages="$unsupported_languages fortran"
+    ;;
+esac
+
+# Disable libffi for some systems.
+case "${target}" in
+  powerpc-*-darwin*)
+    ;;
+  i[3456789]86-*-darwin*)
+    ;;
+  x86_64-*-darwin[912]*)
+    ;;
+  *-*-darwin*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  *-*-netware*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  *-*-phoenix*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  *-*-rtems*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  *-*-tpf*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  *-*-uclinux*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  *-*-vxworks*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  aarch64*-*-freebsd*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  alpha*-*-*vms*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  arm*-*-freebsd*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  arm-wince-pe)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  arm*-*-symbianelf*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  cris-*-* | crisv32-*-*)
+    case "${target}" in
+      *-*-linux*)
+	;;
+      *) # See PR46792 regarding target-libffi.
+	noconfigdirs="$noconfigdirs target-libffi";;
+    esac
+    ;;
+  hppa*64*-*-hpux*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  hppa*-hp-hpux11*)
+    ;;
+  hppa*-*-hpux*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  ia64*-*-*vms*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  i[3456789]86-w64-mingw*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  i[3456789]86-*-mingw*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  x86_64-*-mingw*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  mmix-*-*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  powerpc-*-aix*)
+    ;;
+  rs6000-*-aix*)
+    ;;
+  ft32-*-*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+  *-*-lynxos*)
+    noconfigdirs="$noconfigdirs target-libffi"
+    ;;
+esac
+
+# Disable the go frontend on systems where it is known to not work. Please keep
+# this in sync with contrib/config-list.mk.
+case "${target}" in
+*-*-darwin* | *-*-cygwin* | *-*-mingw*)
+    unsupported_languages="$unsupported_languages go"
+    ;;
+esac
+
+# Disable libgo for some systems where it is known to not work.
+# For testing, you can easily override this with --enable-libgo.
+if test x$enable_libgo = x; then
+    case "${target}" in
+    *-*-darwin*)
+	# PR 46986
+	noconfigdirs="$noconfigdirs target-libgo"
+	;;
+    *-*-cygwin* | *-*-mingw*)
+	noconfigdirs="$noconfigdirs target-libgo"
+	;;
+    esac
+fi
+
 # Default libgloss CPU subdirectory.
 libgloss_dir="$target_cpu"
 
 case "${target}" in
+  sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+    libgloss_dir=wince
+    ;;
+  aarch64*-*-* )
+    libgloss_dir=aarch64
+    ;;
+  arm*-*-*)
+    libgloss_dir=arm
+    ;;
+  cris-*-* | crisv32-*-*)
+    libgloss_dir=cris
+    ;;
+  hppa*-*-*)
+    libgloss_dir=pa
+    ;;
+  i[3456789]86-*-*)
+    libgloss_dir=i386
+    ;;
+  m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+    libgloss_dir=m68hc11
+    ;;
+  m68*-*-* | fido-*-*)
+    libgloss_dir=m68k
+    ;;
+  mips*-*-*)
+    libgloss_dir=mips
+    ;;
+  powerpc*-*-*)
+    libgloss_dir=rs6000
+    ;;
+  sparc*-*-*)
+    libgloss_dir=sparc
+    ;;
+esac
+
+# Disable newlib and libgloss for various target OSes.
+case "${target}" in
+  alpha*-dec-osf*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  i[3456789]86-*-linux*)
+    # This section makes it possible to build newlib natively on linux.
+    # If we are using a cross compiler then don't configure newlib.
+    if test x${is_cross_compiler} != xno ; then
+      noconfigdirs="$noconfigdirs target-newlib"
+    fi
+    noconfigdirs="$noconfigdirs target-libgloss"
+    # If we are not using a cross compiler, do configure newlib.
+    # Note however, that newlib will only be configured in this situation
+    # if the --with-newlib option has been given, because otherwise
+    # 'target-newlib' will appear in skipdirs.
+    ;;
+  i[3456789]86-*-rdos*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  sh*-*-pe|mips*-*-pe|arm-wince-pe)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  sparc-*-sunos4*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-aix*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-beos*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
   *-*-chorusos)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-dragonfly*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-freebsd*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-lynxos*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-mingw*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-netbsd*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-netware*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-tpf*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-uclinux*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  *-*-vxworks*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+esac
+
+case "${target}" in
+  *-*-chorusos)
+    ;;
+  aarch64-*-darwin*)
+    noconfigdirs="$noconfigdirs ld gas gdb gprof"
+    noconfigdirs="$noconfigdirs sim target-rda"
+    ;;
+  arm-*-darwin*)
+    noconfigdirs="$noconfigdirs ld gas gdb gprof"
+    noconfigdirs="$noconfigdirs sim target-rda"
     ;;
   powerpc-*-darwin*)
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
@@ -3125,286 +3628,143 @@
   *-*-darwin*)
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
     noconfigdirs="$noconfigdirs sim target-rda"
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+    ;;
+  *-*-dragonfly*)
     ;;
   *-*-freebsd*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
 	&& test -f /usr/local/include/gmp.h; then
       with_gmp=/usr/local
     fi
-
-    # Skip some stuff that's unsupported on some FreeBSD configurations.
-    case "${target}" in
-      i*86-*-*) ;;
-      alpha*-*-*) ;;
-      x86_64-*-*) ;;
-      *)
-	noconfigdirs="$noconfigdirs ${libgcj}"
-	;;
-    esac
     ;;
   *-*-kaos*)
     # Remove unsupported stuff on all kaOS configurations.
-    skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx"
-    skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
-    skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   *-*-netbsd*)
-    # Skip some stuff on all NetBSD configurations.
-    noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
-
-    # Skip some stuff that's unsupported on some NetBSD configurations.
-    case "${target}" in
-      i*86-*-netbsdelf*) ;;
-      arm*-*-netbsdelf*) ;;
-      *)
-	noconfigdirs="$noconfigdirs ${libgcj}"
-	;;
-    esac
     ;;
   *-*-netware*)
-    noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
+    ;;
+  *-*-phoenix*)
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   *-*-rtems*)
-    skipdirs="${skipdirs} target-libiberty"
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
+    # this is not caught below because this stanza matches earlier
+    case $target in
+      or1k*-*-*) noconfigdirs="$noconfigdirs gdb" ;;
+    esac
     ;;
     # The tpf target doesn't support gdb yet.
   *-*-tpf*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+    noconfigdirs="$noconfigdirs gdb tcl tk libgui itcl"
     ;;
   *-*-uclinux*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
+    noconfigdirs="$noconfigdirs target-rda"
     ;;
   *-*-vxworks*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
   alpha*-dec-osf*)
     # ld works, but does not support shared libraries.
-    # newlib is not 64 bit ready.  I'm not sure about fileutils.
     # gas doesn't generate exception information.
-    noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
+    noconfigdirs="$noconfigdirs gas ld"
     ;;
   alpha*-*-*vms*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
-    ;;
-  alpha*-*-linux*)
-    # newlib is not 64 bit ready
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
     ;;
   alpha*-*-*)
     # newlib is not 64 bit ready
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
-    ;;
-  am33_2.0-*-linux*)
-    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
-    ;;
-  sh-*-linux*)
-    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    noconfigdirs="$noconfigdirs target-examples"
-    noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
     noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
-    noconfigdirs="$noconfigdirs expect dejagnu"
-    # the C++ libraries don't build on top of CE's C libraries
-    noconfigdirs="$noconfigdirs target-libstdc++-v3"
-    noconfigdirs="$noconfigdirs target-newlib"
-    case "${host}" in
-      *-*-cygwin*) ;; # keep gdb and readline
-      *) noconfigdirs="$noconfigdirs gdb readline"
-	 ;;
-    esac
-    libgloss_dir=wince
-    ;;
-  arc-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
-    ;;
-  arm-semi-aof )
-    ;;
-  arm-*-coff | strongarm-*-coff | xscale-*-coff)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    libgloss_dir=arm
-    ;;
-  arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
-    noconfigdirs="$noconfigdirs target-libffi target-qthreads"
-    libgloss_dir=arm
-    ;;
-  arm*-*-linux-gnueabi)
-    noconfigdirs="$noconfigdirs target-qthreads"
-    case ${with_newlib} in
-      no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    esac
-    libgloss_dir=arm
-    ;;
-  arm*-*-symbianelf*)
-    noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
-    libgloss_dir=arm
+    ;;
+  arc*-*-*)
+    noconfigdirs="$noconfigdirs sim"
     ;;
   arm-*-pe*)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
-    ;;
-  thumb-*-coff)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
-    ;;
-  thumb-*-elf)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
-    ;;
-  thumb-*-pe)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   arm-*-riscix*)
-    noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ld target-libgloss"
     ;;
   avr-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj} target-libssp"
-    ;;
-  bfin-*-*)
-    unsupported_languages="$unsupported_languages java"
-    noconfigdirs="$noconfigdirs target-boehm-gc"
-    if test x${is_cross_compiler} != xno ; then
-      target_configdirs="${target_configdirs} target-bsp target-cygmon"
+    if test x${with_avrlibc} != xno; then
+      noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     fi
     ;;
   c4x-*-* | tic4x-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
-    ;;
-  c54x*-*-* | tic54x-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
-    ;;
-  cr16-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj} gdb"
-    ;;
-  cris-*-* | crisv32-*-*)
-    unsupported_languages="$unsupported_languages java"
-    case "${target}" in
-      *-*-aout)
-	unsupported_languages="$unsupported_languages fortran"
-	noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
-      *-*-elf) # See PR46792 regarding target-libffi.
-	noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
-      *-*-linux*)
-	noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
-      *)
-	unsupported_languages="$unsupported_languages fortran"
-	noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
-    esac
-    libgloss_dir=cris
-    ;;
-  crx-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
+    ;;
+  tic54x-*-*)
+    noconfigdirs="$noconfigdirs target-libgloss gdb"
     ;;
   d10v-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   d30v-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj} gdb"
-    ;;
-  ep9312-*-elf | ep9312-*-coff)
-    libgloss_dir=arm
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   fr30-*-elf*)
-    noconfigdirs="$noconfigdirs ${libgcj} gdb"
-    ;;
-  frv-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb"
+    ;;
+  ft32-*-*)
+    noconfigdirs="$noconfigdirs target-rda gprof"
     ;;
   moxie-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    noconfigdirs="$noconfigdirs gprof"
+    noconfigdirs="$noconfigdirs"
     ;;
   h8300*-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   h8500-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   hppa1.1-*-osf* | hppa1.1-*-bsd* )
     ;;
-  hppa*64*-*-linux* | parisc*64*-*-linux*)
-    # In this case, it's because the hppa64-linux target is for
-    # the kernel only at this point and has no libc, and thus no
-    # headers, crt*.o, etc., all of which are needed by these.
-    noconfigdirs="$noconfigdirs target-zlib"
-    ;;
-  parisc*-*-linux* | hppa*-*-linux*)
+  hppa*64*-*-hpux*)
+    noconfigdirs="$noconfigdirs gdb"
+    ;;
+  hppa*-*-hpux11*)
+    noconfigdirs="$noconfigdirs gdb ld"
+    ;;
+  hppa*64*-*-linux*)
+    ;;
+  hppa*-*-linux*)
     ;;
   hppa*-*-*elf* | \
   hppa*-*-lites* | \
   hppa*-*-openbsd* | \
   hppa*64*-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  hppa*-hp-hpux11*)
-    noconfigdirs="$noconfigdirs ld shellutils"
     ;;
   hppa*-*-pro*)
-    libgloss_dir=pa
     ;;
   hppa*-*-*)
-    # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
-    # build on HP-UX 10.20.
-    noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
+    noconfigdirs="$noconfigdirs ld"
     ;;
   i960-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj} gdb"
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   ia64*-*-elf*)
     # No gdb support yet.
-    noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
+    noconfigdirs="$noconfigdirs readline libgui itcl gdb"
     ;;
   ia64*-**-hpux*)
     # No ld support yet.
-    noconfigdirs="$noconfigdirs ${libgcj} libgui itcl ld"
+    noconfigdirs="$noconfigdirs gdb libgui itcl ld"
     ;;
   ia64*-*-*vms*)
-    # No gdb or ld support yet.
-    noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
-    ;;
-  i370-*-opened*)
-    ;;
-  i[3456789]86-*-coff | i[3456789]86-*-elf)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    libgloss_dir=i386
-    ;;
-  i[3456789]86-*-linux*)
-    # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
-    # not build java stuff by default.
-    case "${target}" in
-      *-*-*libc1*)
-	noconfigdirs="$noconfigdirs ${libgcj}";;
-    esac
-
-    # This section makes it possible to build newlib natively on linux.
-    # If we are using a cross compiler then don't configure newlib.
-    if test x${is_cross_compiler} != xno ; then
-      noconfigdirs="$noconfigdirs target-newlib"
-    fi
-    noconfigdirs="$noconfigdirs target-libgloss"
-    # If we are not using a cross compiler, do configure newlib.
-    # Note however, that newlib will only be configured in this situation
-    # if the --with-newlib option has been given, because otherwise
-    # 'target-newlib' will appear in skipdirs.
+    # No ld support yet.
+    noconfigdirs="$noconfigdirs libgui itcl ld"
     ;;
   i[3456789]86-w64-mingw*)
-    noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
     ;;
   i[3456789]86-*-mingw*)
     target_configdirs="$target_configdirs target-winsup"
-    noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
-    ;;
-  x86_64-*-mingw*)
-    noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
     ;;
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
-    noconfigdirs="$noconfigdirs target-gperf target-libgloss"
+    noconfigdirs="$noconfigdirs target-libgloss"
     # always build newlib if winsup directory is present.
     if test -d "$srcdir/winsup/cygwin"; then
       skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
@@ -3412,211 +3772,121 @@
       echo "Warning: winsup/cygwin is missing so newlib can't be built."
     fi
     ;;
-  i[3456789]86-moss-msdos | i[3456789]86-*-moss* | \
-  i[3456789]86-*-uwin* | i[3456789]86-*-interix* )
-    ;;
   i[3456789]86-*-pe)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   i[3456789]86-*-sco3.2v5*)
     # The linker does not yet know about weak symbols in COFF,
     # and is not configured to handle mixed ELF and COFF.
-    noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ld target-libgloss"
     ;;
   i[3456789]86-*-sco*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
-    ;;
-  i[3456789]86-*-solaris2*)
+    noconfigdirs="$noconfigdirs gprof target-libgloss"
+    ;;
+  i[3456789]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   i[3456789]86-*-sysv4*)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   i[3456789]86-*-beos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   i[3456789]86-*-rdos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
-    ;;
-  m32r-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
-    libgloss_dir=m68hc11
-    ;;
-  m68k-*-elf*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  m68k-*-coff*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  m68*-*-* | fido-*-*)
-    libgloss_dir=m68k
-    ;;
-  mcore-*-pe*)
-  # The EPOC C++ environment does not support exceptions or rtti,
-  # and so building libstdc++-v3 tends not to always work.
-    noconfigdirs="$noconfigdirs target-libstdc++-v3"
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   mmix-*-*)
-    noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
-    unsupported_languages="$unsupported_languages fortran java"
-    ;;
-  mn10200-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  mn10300-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   mt-*-*)
     noconfigdirs="$noconfigdirs sim"
     ;;
-  picochip-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty"
-    ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
-    ;;
-  powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
+    noconfigdirs="$noconfigdirs gprof"
+    ;;
+  powerpc*-*-winnt* | powerpc*-*-pe*)
     target_configdirs="$target_configdirs target-winsup"
-    noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb tcl tk target-libgloss itcl"
     # always build newlib.
     skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
     ;;
     # This is temporary until we can link against shared libraries
   powerpcle-*-solaris*)
-    noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
-    libgloss_dir=rs6000
+    noconfigdirs="$noconfigdirs gdb sim tcl tk itcl"
     ;;
   powerpc-*-beos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
-    ;;
-  powerpc-*-eabi)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    libgloss_dir=rs6000
-    ;;
-  powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
-    libgloss_dir=rs6000
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   rs6000-*-lynxos*)
-    noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof"
     ;;
   rs6000-*-aix*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof"
     ;;
   rs6000-*-*)
-    noconfigdirs="$noconfigdirs gprof ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof"
     ;;
   m68k-apollo-*)
-    noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss"
     ;;
   microblaze*)
-    noconfigdirs="$noconfigdirs gprof target-libssp ${libgcj}"
-    ;;
-  mips*-sde-elf*)
-    skipdirs="$skipdirs target-libiberty"
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof"
+    ;;
+  mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
     if test x$with_newlib = xyes; then
       noconfigdirs="$noconfigdirs gprof"
     fi
-    libgloss_dir=mips
     ;;
   mips*-*-irix5*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss"
     ;;
   mips*-*-irix6*)
-    # Linking libjava exceeds command-line length limits on at least
-    # IRIX 6.2, but not on IRIX 6.5.
-    # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
-    # <oldham@codesourcery.com>
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss"
     ;;
   mips*-*-bsd*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ld gas gprof target-libgloss"
     ;;
   mips*-*-linux*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    ;;
+  mips*-*-ultrix* | mips*-*-osf* | mips*-*-ecoff* | mips*-*-pe* \
+  | mips*-*-irix* | mips*-*-lnews* | mips*-*-riscos*)
+    noconfigdirs="$noconfigdirs ld gas gprof"
     ;;
   mips*-*-*)
-    noconfigdirs="$noconfigdirs gprof ${libgcj}"
-    libgloss_dir=mips
-    ;;
-  romp-*-*)
-    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
-    ;;
-  sh-*-* | sh64-*-*)
-    case "${host}" in
-      i[3456789]86-*-vsta) ;; # don't add gprof back in
-      i[3456789]86-*-go32*) ;; # don't add gprof back in
-      i[3456789]86-*-msdosdjgpp*) ;; # don't add gprof back in
-      *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
-    esac
+    noconfigdirs="$noconfigdirs gprof"
+    ;;
+  nvptx*-*-*)
+    noconfigdirs="$noconfigdirs target-libssp target-libstdc++-v3 target-libobjc"
+    ;;
+  or1k*-*-*)
+    noconfigdirs="$noconfigdirs gdb"
+    ;;
+  sh-*-*)
     case "${target}" in
       sh*-*-elf)
-         noconfigdirs="$noconfigdirs ${libgcj}" ;;
+         ;;
       *)
-         noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;;
+         noconfigdirs="$noconfigdirs target-libgloss" ;;
     esac
     ;;
-  sparclet-*-aout* | sparc86x-*-*)
-    libgloss_dir=sparc
-    ;;
-  sparc-*-elf*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  sparc64-*-elf*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    libgloss_dir=sparc
-    ;;
-  sparclite-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    libgloss_dir=sparc
-    ;;
   sparc-*-sunos4*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    if test x${is_cross_compiler} != xno ; then
-           noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
-    else
+    if test x${is_cross_compiler} = xno ; then
            use_gnu_ld=no
     fi
     ;;
-  sparc-*-solaris2.[0-6] | sparc-*-solaris2.[0-6].*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
-    ;;
   tic6x-*-*)
-    noconfigdirs="$noconfigdirs gdb sim ${libgcj}"
+    noconfigdirs="$noconfigdirs sim"
+    ;;
+  tilepro*-*-* | tilegx*-*-*)
+    noconfigdirs="$noconfigdirs sim"
     ;;
   v810-*-*)
-    noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
-    ;;
-  v850*-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  vax-*-vms)
-    noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs bfd binutils gas gdb ld opcodes target-libgloss"
     ;;
   vax-*-*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
-    ;;
-  xtensa*-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  ip2k-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
-    ;;
-  *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  *-*-lynxos*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
-    ;;
-  *-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
 esac
 
 # If we aren't building newlib, then don't build libgloss, since libgloss
@@ -3627,111 +3897,9 @@
 esac
 
 # Work in distributions that contain no compiler tools, like Autoconf.
-tentative_cc=""
 host_makefile_frag=/dev/null
 if test -d ${srcdir}/config ; then
 case "${host}" in
-  m68k-hp-hpux*)
-    # Avoid "too much defining" errors from HPUX compiler.
-    tentative_cc="cc -Wp,-H256000"
-    # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
-    # If it's HP/UX ar, this should be harmless.
-    RANLIB="ar ts"
-    ;;
-  m68k-apollo-sysv*)
-    tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
-    ;;
-  m68k-apollo-bsd*)
-    #None of the Apollo compilers can compile gas or binutils.  The preprocessor
-    # chokes on bfd, the compiler won't let you assign integers to enums, and
-    # other problems.  Defining CC to gcc is a questionable way to say "don't use
-    # the apollo compiler" (the preferred version of GCC could be called cc,
-    # or whatever), but I'm not sure leaving CC as cc is any better...
-    #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
-    # Used to have BISON=yacc.
-    tentative_cc=gcc
-    ;;
-  m88k-dg-dgux*)
-    tentative_cc="gcc -Wall -ansi -D__using_DGUX"
-    ;;
-  m88k-harris-cxux*)
-    # Under CX/UX, we want to tell the compiler to use ANSI mode.
-    tentative_cc="cc -Xa"
-    host_makefile_frag="config/mh-cxux"
-    ;;
-  m88k-motorola-sysv*)
-    ;;
-  mips*-dec-ultrix*)
-    tentative_cc="cc -Wf,-XNg1000"
-    host_makefile_frag="config/mh-decstation"
-    ;;
-  mips*-nec-sysv4*)
-    # The C compiler on NEC MIPS SVR4 needs bigger tables.
-    tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
-    host_makefile_frag="config/mh-necv4"
-    ;;
-  mips*-sgi-irix4*)
-    # Tell compiler to use K&R C.  We can't compile under the SGI Ansi
-    # environment.  Also bump switch table size so that cp-parse will
-    # compile.  Bump string length limit so linker builds.
-    tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
-    ;;
-  mips*-*-sysv4*)
-    host_makefile_frag="config/mh-sysv4"
-    ;;
-  mips*-*-sysv*)
-    # This is for a MIPS running RISC/os 4.52C.
-
-    # This is needed for GDB, but needs to be in the top-level make because
-    # if a library is compiled with the bsd headers and gets linked with the
-    # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
-    # a different size).
-    # ptrace(2) apparently has problems in the BSD environment.  No workaround is
-    # known except to select the sysv environment.  Could we use /proc instead?
-    # These "sysv environments" and "bsd environments" often end up being a pain.
-    #
-    # This is not part of CFLAGS because perhaps not all C compilers have this
-    # option.
-    tentative_cc="cc -systype sysv"
-    ;;
-  i370-ibm-opened*)
-    tentative_cc="c89"
-    ;;
-  i[3456789]86-*-sysv5*)
-    host_makefile_frag="config/mh-sysv5"
-    ;;
-  i[3456789]86-*-dgux*)
-    tentative_cc="gcc -Wall -ansi -D__using_DGUX"
-    host_makefile_frag="config/mh-dgux386"
-    ;;
-  i[3456789]86-ncr-sysv4.3*)
-    # The MetaWare compiler will generate a copyright message unless you
-    # turn it off by adding the -Hnocopyr flag.
-    tentative_cc="cc -Hnocopyr"
-    ;;
-  i[3456789]86-ncr-sysv4*)
-    # for an NCR 3000 (i486/SVR4) system.
-    # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
-    # This compiler not only emits obnoxious copyright messages every time
-    # you run it, but it chokes and dies on a whole bunch of GNU source
-    # files.  Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
-    tentative_cc="/usr/ccs/ATT/cc"
-    host_makefile_frag="config/mh-ncr3000"
-    ;;
-  i[3456789]86-*-sco3.2v5*)
-    ;;
-  i[3456789]86-*-sco*)
-    # The native C compiler botches some simple uses of const.  Unfortunately,
-    # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
-    tentative_cc="cc -Dconst="
-    host_makefile_frag="config/mh-sco"
-    ;;
-  i[3456789]86-*-udk*)
-    host_makefile_frag="config/mh-sysv5"
-    ;;
-  i[3456789]86-*-solaris2*)
-    host_makefile_frag="config/mh-sysv4"
-    ;;
   i[3456789]86-*-msdosdjgpp*)
     host_makefile_frag="config/mh-djgpp"
     ;;
@@ -3761,40 +3929,18 @@
   *-mingw*)
     host_makefile_frag="config/mh-mingw"
     ;;
-  *-interix*)
-    host_makefile_frag="config/mh-interix"
-    ;;
-  vax-*-ultrix2*)
-    # The old BSD pcc isn't up to compiling parts of gdb so use gcc
-    tentative_cc=gcc
-    ;;
-  *-*-solaris2*)
-    host_makefile_frag="config/mh-solaris"
-    ;;
-  m68k-sun-sunos*)
-    # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
-    # without overflowing the jump tables (-J says to use a 32 bit table)
-    tentative_cc="cc -J"
+  alpha*-linux*)
+    host_makefile_frag="config/mh-alpha-linux"
     ;;
   hppa*-hp-hpux10*)
-    tentative_cc="cc -Wp,-H256000"
     host_makefile_frag="config/mh-pa-hpux10"
     ;;
-  hppa*-hp-hpux* | hppa*-*-hiux*)
-    tentative_cc="cc -Wp,-H256000"
+  hppa*-hp-hpux*)
     host_makefile_frag="config/mh-pa"
     ;;
   hppa*-*)
     host_makefile_frag="config/mh-pa"
     ;;
-  *-hp-hpux* | *-*-hiux*)
-    tentative_cc="cc -Wp,-H256000"
-    ;;
-  rs6000-*-lynxos*)
-    # /bin/cc is less than useful for our purposes.  Always use GCC
-    tentative_cc="/usr/cygnus/progressive/bin/gcc"
-    host_makefile_frag="config/mh-lynxrs6k"
-    ;;
   *-*-darwin*)
     host_makefile_frag="config/mh-darwin"
     ;;
@@ -3804,38 +3950,7 @@
   rs6000-*-aix*)
     host_makefile_frag="config/mh-ppc-aix"
     ;;
-  *-*-lynxos*)
-    # /bin/cc is less than useful for our purposes.  Always use GCC
-    tentative_cc="/bin/gcc"
-    ;;
-  *-*-sysv4*)
-    host_makefile_frag="config/mh-sysv4"
-    ;;
-  # This is placed last to prevent interfering with the cases above.
-  i[3456789]86-*-*)
-    # Build the stage2 and stage3 compilers with -fomit-frame-pointer.
-    host_makefile_frag="config/mh-x86omitfp"
-    ;;
-esac
-fi
-
-# If we aren't going to be using gcc, see if we can extract a definition
-# of CC from the fragment.
-# Actually, use the 'pre-extracted' version above.
-if test -z "${CC}" && test "${build}" = "${host}" ; then
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-  found=
-  for dir in $PATH; do
-    test -z "$dir" && dir=.
-    if test -f $dir/gcc; then
-      found=yes
-      break
-    fi
-  done
-  IFS="$save_ifs"
-  if test -z "${found}" && test -n "${tentative_cc}" ; then
-    CC=$tentative_cc
-  fi
+esac
 fi
 
 if test "${build}" != "${host}" ; then
@@ -3843,7 +3958,6 @@
   AS_FOR_BUILD=${AS_FOR_BUILD-as}
   CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
   CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
-  GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj}
   GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
   GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
   DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
@@ -3857,7 +3971,6 @@
   AS_FOR_BUILD="\$(AS)"
   CC_FOR_BUILD="\$(CC)"
   CXX_FOR_BUILD="\$(CXX)"
-  GCJ_FOR_BUILD="\$(GCJ)"
   GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
   GOC_FOR_BUILD="\$(GOC)"
   DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
@@ -4910,6 +5023,48 @@
   fi
 fi
 
+# Check whether -static-libstdc++ -static-libgcc is supported.
+have_static_libs=no
+if test "$GCC" = yes; then
+  saved_LDFLAGS="$LDFLAGS"
+
+  LDFLAGS="$LDFLAGS -static-libstdc++ -static-libgcc"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether g++ accepts -static-libstdc++ -static-libgcc" >&5
+$as_echo_n "checking whether g++ accepts -static-libstdc++ -static-libgcc... " >&6; }
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if (__GNUC__ < 4) || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+#error -static-libstdc++ not implemented
+#endif
+int main() {}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }; have_static_libs=yes
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+  LDFLAGS="$saved_LDFLAGS"
+fi
+
 
 
 
@@ -5123,7 +5278,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $acx_cv_cc_gcc_supports_ada" >&5
 $as_echo "$acx_cv_cc_gcc_supports_ada" >&6; }
 
-if test x$GNATBIND != xno && test x$GNATMAKE != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
+if test "x$GNATBIND" != xno && test "x$GNATMAKE" != xno && test x$acx_cv_cc_gcc_supports_ada != xno; then
   have_gnat=yes
 else
   have_gnat=no
@@ -5136,7 +5291,7 @@
 else
    echo abfoo >t1
   echo cdfoo >t2
-  gcc_cv_prog_cmp_skip='tail +16c $$f1 > tmp-foo1; tail +16c $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2'
+  gcc_cv_prog_cmp_skip='tail -c +17 $$f1 > tmp-foo1; tail -c +17 $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2'
   if cmp t1 t2 2 2 > /dev/null 2>&1; then
     if cmp t1 t2 1 1 > /dev/null 2>&1; then
       :
@@ -5160,14 +5315,58 @@
 
 
 
-# See if we are building gcc with C++.
-# Check whether --enable-build-with-cxx was given.
-if test "${enable_build_with_cxx+set}" = set; then :
-  enableval=$enable_build_with_cxx; ENABLE_BUILD_WITH_CXX=$enableval
-else
-  ENABLE_BUILD_WITH_CXX=no
-fi
-
+# Check whether --enable-bootstrap was given.
+if test "${enable_bootstrap+set}" = set; then :
+  enableval=$enable_bootstrap;
+else
+  enable_bootstrap=default
+fi
+
+
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+if test -r $srcdir/gcc/configure; then
+  have_compiler=yes
+else
+  have_compiler=no
+fi
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+  *:*:*:no) ;;
+
+  # Default behavior.  Enable bootstrap if we have a compiler
+  # and we are in a native configuration.
+  yes:$build:$build:default)
+    enable_bootstrap=yes ;;
+
+  *:*:*:default)
+    enable_bootstrap=no ;;
+
+  # We have a compiler and we are in a native configuration, bootstrap is ok
+  yes:$build:$build:yes)
+    ;;
+
+  # Other configurations, but we have a compiler.  Assume the user knows
+  # what he's doing.
+  yes:*:*:yes)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: trying to bootstrap a cross compiler" >&5
+$as_echo "$as_me: WARNING: trying to bootstrap a cross compiler" >&2;}
+    ;;
+
+  # No compiler: if they passed --enable-bootstrap explicitly, fail
+  no:*:*:yes)
+    as_fn_error "cannot bootstrap without a compiler" "$LINENO" 5 ;;
+
+  # Fail if wrong command line
+  *)
+    as_fn_error "invalid option for --enable-bootstrap" "$LINENO" 5
+    ;;
+esac
+
+# When bootstrapping with GCC, build stage 1 in C++98 mode to ensure that a
+# C++98 compiler can still start the bootstrap.
+if test "$enable_bootstrap:$GXX" = "yes:yes"; then
+  CXX="$CXX -std=gnu++98"
+fi
 
 # Used for setting $lt_cv_objdir
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
@@ -5285,9 +5484,13 @@
   gmplibs="-L$with_mpfr_lib $gmplibs"
 fi
 if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/mpfr; then
-  gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir $gmplibs"
-  gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc"
-  extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir"
+  # MPFR v3.1.0 moved the sources into a src sub-directory.
+  if ! test -d ${srcdir}/mpfr/src; then
+    as_fn_error "Building GCC with MPFR in the source tree is only handled for MPFR 3.1.0+." "$LINENO" 5
+  fi
+  gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir $gmplibs"
+  gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr/src -I$$s/mpfr/src '"$gmpinc"
+  extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr/src --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir"
   # Do not test the mpfr version.  Assume that it is sufficient, since
   # it is in the source tree, and the library has not been built yet
   # but it would be included on the link line in the version check below
@@ -5339,6 +5542,7 @@
   gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
   extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
   extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
+  extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp'
   # Do not test the gmp version.  Assume that it is sufficient, since
   # it is in the source tree, and the library has not been built yet
   # but it would be included on the link line in the version check below
@@ -5363,7 +5567,7 @@
 
   #define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c))
   #define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL)
-  #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,2,0)
+  #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,2,3)
   choke me
   #endif
 
@@ -5416,7 +5620,7 @@
 main ()
 {
 
-    #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,1)
+    #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,0)
     choke me
     #endif
 
@@ -5559,7 +5763,7 @@
 # The library versions listed in the error message below should match
 # the HARD-minimums enforced above.
   if test x$have_gmp != xyes; then
-    as_fn_error "Building GCC requires GMP 4.2+, MPFR 2.3.1+ and MPC 0.8.0+.
+    as_fn_error "Building GCC requires GMP 4.2+, MPFR 2.4.0+ and MPC 0.8.0+.
 Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify
 their locations.  Source code for these libraries can be found at
 their respective hosting sites as well as at
@@ -5578,21 +5782,23 @@
 
 
 
-# Allow host libstdc++ to be specified for static linking with PPL.
-
-# Check whether --with-host-libstdcxx was given.
-if test "${with_host_libstdcxx+set}" = set; then :
-  withval=$with_host_libstdcxx;
-fi
-
-
-case $with_host_libstdcxx in
-  no|yes)
-    as_fn_error "-with-host-libstdcxx needs an argument" "$LINENO" 5
-    ;;
-esac
-
-# Linker flags to use for stage1 or when not boostrapping.
+
+# Libraries to use for stage1 or when not bootstrapping.
+
+# Check whether --with-stage1-libs was given.
+if test "${with_stage1_libs+set}" = set; then :
+  withval=$with_stage1_libs; if test "$withval" = "no" -o "$withval" = "yes"; then
+   stage1_libs=
+ else
+   stage1_libs=$withval
+ fi
+else
+  stage1_libs=
+fi
+
+
+
+# Linker flags to use for stage1 or when not bootstrapping.
 
 # Check whether --with-stage1-ldflags was given.
 if test "${with_stage1_ldflags+set}" = set; then :
@@ -5603,27 +5809,17 @@
  fi
 else
   stage1_ldflags=
-fi
-
-
-
-# Libraries to use for stage1 or when not bootstrapping.
-
-# Check whether --with-stage1-libs was given.
-if test "${with_stage1_libs+set}" = set; then :
-  withval=$with_stage1_libs; if test "$withval" = "no" -o "$withval" = "yes"; then
-   stage1_libs=
- else
-   stage1_libs=$withval
+ # In stage 1, default to linking libstdc++ and libgcc statically with GCC
+ # if supported.  But if the user explicitly specified the libraries to use,
+ # trust that they are doing what they want.
+ if test "$stage1_libs" = "" -a "$have_static_libs" = yes; then
+   stage1_ldflags="-static-libstdc++ -static-libgcc"
  fi
-else
-  stage1_libs=$with_host_libstdcxx
-fi
-
-
-
-# Libraries to use for stage2 and later builds.  This defaults to the
-# argument passed to --with-host-libstdcxx.
+fi
+
+
+
+# Libraries to use for stage2 and later builds.
 
 # Check whether --with-boot-libs was given.
 if test "${with_boot_libs+set}" = set; then :
@@ -5633,7 +5829,7 @@
    poststage1_libs=$withval
  fi
 else
-  poststage1_libs=$with_host_libstdcxx
+  poststage1_libs=
 fi
 
 
@@ -5659,498 +5855,126 @@
 
 
 
-# Check for PPL
-ppllibs=
-pplinc=
-pwllib=
-
-
-# Check whether --with-ppl was given.
-if test "${with_ppl+set}" = set; then :
-  withval=$with_ppl;
-fi
-
-
-# Check whether --with-ppl-include was given.
-if test "${with_ppl_include+set}" = set; then :
-  withval=$with_ppl_include;
-fi
-
-
-# Check whether --with-ppl-lib was given.
-if test "${with_ppl_lib+set}" = set; then :
-  withval=$with_ppl_lib;
-fi
-
-
-# Check whether --enable-ppl-version-check was given.
-if test "${enable_ppl_version_check+set}" = set; then :
-  enableval=$enable_ppl_version_check;
-fi
-
-
-case $with_ppl in
-  yes | no | "")
-    ;;
-  *)
-    ppllibs="-L$with_ppl/lib"
-    pplinc="-I$with_ppl/include $pplinc"
-    if test -d "$with_ppl/lib" && test -d "$with_ppl/include"; then
-      with_ppl=yes
-    else
-      as_fn_error "cannot find directories \"$with_ppl/lib\" or \"$with_ppl/include\"" "$LINENO" 5
-    fi
-    ;;
-esac
-
-if test x"$with_ppl_include" != x; then
-  pplinc="-I$with_ppl_include $pplinc"
-  with_ppl=yes
-fi
-
-if test "x$with_ppl_lib" != x; then
-  ppllibs="-L$with_ppl_lib"
-  with_ppl=yes
-fi
-
-if test x"$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
-  if test x"$enable_watchdog" = xyes; then
-    pwllib="-lpwl"
-  fi
-  ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"
-  pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C '
-  enable_ppl_version_check=no
-  with_ppl=yes
-fi
-
-if test "x$with_ppl" != xno; then
-  if test "x$pwllib" = x; then
-    saved_LDFLAGS="$LDFLAGS"
-    LDFLAGS="$LDFLAGS $ppllibs"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PWL_handle_timeout in -lpwl" >&5
-$as_echo_n "checking for PWL_handle_timeout in -lpwl... " >&6; }
-if test "${ac_cv_lib_pwl_PWL_handle_timeout+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpwl  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+# GCC GRAPHITE dependency isl.
+# Basic setup is inlined here, actual checks are in config/isl.m4
+
+
+# Check whether --with-isl was given.
+if test "${with_isl+set}" = set; then :
+  withval=$with_isl;
+fi
+
+
+# Treat --without-isl as a request to disable
+# GRAPHITE support and skip all following checks.
+if test "x$with_isl" != "xno"; then
+  # Check for isl
+
+
+# Check whether --with-isl-include was given.
+if test "${with_isl_include+set}" = set; then :
+  withval=$with_isl_include;
+fi
+
+
+# Check whether --with-isl-lib was given.
+if test "${with_isl_lib+set}" = set; then :
+  withval=$with_isl_lib;
+fi
+
+
+  # Check whether --enable-isl-version-check was given.
+if test "${enable_isl_version_check+set}" = set; then :
+  enableval=$enable_isl_version_check; ENABLE_ISL_CHECK=$enableval
+else
+  ENABLE_ISL_CHECK=yes
+fi
+
+
+  # Initialize isllibs and islinc.
+  case $with_isl in
+    no)
+      isllibs=
+      islinc=
+      ;;
+    "" | yes)
+      ;;
+    *)
+      isllibs="-L$with_isl/lib"
+      islinc="-I$with_isl/include"
+      ;;
+  esac
+  if test "x${with_isl_include}" != x ; then
+    islinc="-I$with_isl_include"
+  fi
+  if test "x${with_isl_lib}" != x; then
+    isllibs="-L$with_isl_lib"
+  fi
+        if test "x${islinc}" = x && test "x${isllibs}" = x \
+     && test -d ${srcdir}/isl; then
+    isllibs='-L$$r/$(HOST_SUBDIR)/isl/'"$lt_cv_objdir"' '
+    islinc='-I$$r/$(HOST_SUBDIR)/isl/include -I$$s/isl/include'
+    ENABLE_ISL_CHECK=no
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using in-tree isl, disabling version check" >&5
+$as_echo "$as_me: WARNING: using in-tree isl, disabling version check" >&2;}
+  fi
+
+  isllibs="${isllibs} -lisl"
+
+
+
+  if test "${ENABLE_ISL_CHECK}" = yes ; then
+    _isl_saved_CFLAGS=$CFLAGS
+    _isl_saved_LDFLAGS=$LDFLAGS
+    _isl_saved_LIBS=$LIBS
+
+    CFLAGS="${_isl_saved_CFLAGS} ${islinc} ${gmpinc}"
+    LDFLAGS="${_isl_saved_LDFLAGS} ${isllibs} ${gmplibs}"
+    LIBS="${_isl_saved_LIBS} -lisl -lgmp"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for isl 0.15 or later" >&5
+$as_echo_n "checking for isl 0.15 or later... " >&6; }
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char PWL_handle_timeout ();
+#include <isl/schedule.h>
 int
 main ()
 {
-return PWL_handle_timeout ();
+isl_options_set_schedule_serialize_sccs (NULL, 0);
   ;
   return 0;
 }
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_pwl_PWL_handle_timeout=yes
-else
-  ac_cv_lib_pwl_PWL_handle_timeout=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pwl_PWL_handle_timeout" >&5
-$as_echo "$ac_cv_lib_pwl_PWL_handle_timeout" >&6; }
-if test "x$ac_cv_lib_pwl_PWL_handle_timeout" = x""yes; then :
-  pwllib="-lpwl"
-fi
-
-    LDFLAGS="$saved_LDFLAGS"
-  fi
-
-  ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx"
-
-  if test "$enable_ppl_version_check" != no; then
-    saved_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS $pplinc $gmpinc"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.11 (revision 0 or later) of PPL" >&5
-$as_echo_n "checking for version 0.11 (revision 0 or later) of PPL... " >&6; }
-    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include "ppl_c.h"
-int
-main ()
-{
-
-    #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
-    choke me
-    #endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }; ppllibs= ; pplinc= ; with_ppl=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-    CFLAGS="$saved_CFLAGS"
-  fi
-fi
-
-# Flags needed for PPL
-
-
-
-
-# Check for CLOOG
-
-
-
-# Check whether --with-cloog was given.
-if test "${with_cloog+set}" = set; then :
-  withval=$with_cloog;
-fi
-
-
-# Check whether --with-cloog-include was given.
-if test "${with_cloog_include+set}" = set; then :
-  withval=$with_cloog_include;
-fi
-
-
-# Check whether --with-cloog-lib was given.
-if test "${with_cloog_lib+set}" = set; then :
-  withval=$with_cloog_lib;
-fi
-
-
-  # Check whether --enable-cloog-backend was given.
-if test "${enable_cloog_backend+set}" = set; then :
-  enableval=$enable_cloog_backend;  if   test "x${enableval}" = "xisl"; then
-	cloog_backend=isl
-      elif test "x${enableval}" = "xppl"; then
-	cloog_backend=ppl
-      else
-	cloog_backend=ppl-legacy
-      fi
-else
-  cloog_backend=ppl-legacy
-fi
-
-  # Check whether --enable-cloog-version-check was given.
-if test "${enable_cloog_version_check+set}" = set; then :
-  enableval=$enable_cloog_version_check; ENABLE_CLOOG_CHECK=$enableval
-else
-  ENABLE_CLOOG_CHECK=yes
-fi
-
-
-  # Initialize clooglibs and clooginc.
-  case $with_cloog in
-    no)
-      clooglibs=
-      clooginc=
-      ;;
-    "" | yes)
-      ;;
-    *)
-      clooglibs="-L$with_cloog/lib"
-      clooginc="-I$with_cloog/include"
-      ;;
-  esac
-  if test "x${with_cloog_include}" != x ; then
-    clooginc="-I$with_cloog_include"
-  fi
-  if test "x${with_cloog_lib}" != x; then
-    clooglibs="-L$with_cloog_lib"
-  fi
-
-
-
-
-
-if test "x$with_ppl" = "xno"; then
-
-
-
-  if test "x${with_cloog}" = xno; then
-    graphite_requested=no
-  elif test "x${with_cloog}" != x \
-    || test "x${with_cloog_include}" != x \
-    || test "x${with_cloog_lib}" != x ; then
-    graphite_requested=yes
-  else
-    graphite_requested=no
-  fi
-
-
-  if test "${graphite_requested}" = yes; then
-    as_fn_error "Unable to find a usable PPL.  See config.log for details." "$LINENO" 5
-  fi
-  with_cloog=no
-fi
-if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
-  && test "x${with_cloog_lib}" = x && test -d ${srcdir}/cloog; then
-  clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/'"$lt_cv_objdir"' '
-  clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include '
-fi
-if test "x$with_cloog" != "xno"; then
-
-
-
-  _cloog_saved_CFLAGS=$CFLAGS
-  _cloog_saved_CPPFLAGS=$CPPFLAGS
-  _cloog_saved_LDFLAGS=$LDFLAGS
-  _cloog_saved_LIBS=$LIBS
-
-  _cloogorginc="-DCLOOG_INT_GMP -DCLOOG_ORG"
-
-    CFLAGS="${CFLAGS} ${clooginc} ${gmpinc}"
-  CPPFLAGS="${CPPFLAGS} ${_cloogorginc}"
-  LDFLAGS="${LDFLAGS} ${clooglibs}"
-
-  case $cloog_backend in
-    "ppl-legacy")
-    CFLAGS="${CFLAGS} ${pplinc}"
-    LDFLAGS="${LDFLAGS} ${ppllibs}"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for installed CLooG PPL Legacy" >&5
-$as_echo_n "checking for installed CLooG PPL Legacy... " >&6; }
-if test "${gcc_cv_cloog_type+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  LIBS="-lcloog ${_cloog_saved_LIBS}"
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include "cloog/cloog.h"
-int
-main ()
-{
-#ifndef CLOOG_PPL_BACKEND
-    choke me
-   #endif
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  gcc_cv_cloog_type="PPL Legacy"
-else
-  gcc_cv_cloog_type=no
+  gcc_cv_isl=yes
+else
+  gcc_cv_isl=no
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_cloog_type" >&5
-$as_echo "$gcc_cv_cloog_type" >&6; }
-    ;;
-    "isl")
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for installed CLooG ISL" >&5
-$as_echo_n "checking for installed CLooG ISL... " >&6; }
-if test "${gcc_cv_cloog_type+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  LIBS="-lcloog-isl ${_cloog_saved_LIBS}"
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include "cloog/cloog.h"
-int
-main ()
-{
-cloog_version ()
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  gcc_cv_cloog_type="ISL"
-else
-  gcc_cv_cloog_type=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_cloog_type" >&5
-$as_echo "$gcc_cv_cloog_type" >&6; }
-    ;;
-    "ppl")
-    CFLAGS="${CFLAGS} ${pplinc}"
-    LDFLAGS="${LDFLAGS} ${ppllibs}"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for installed CLooG PPL" >&5
-$as_echo_n "checking for installed CLooG PPL... " >&6; }
-if test "${gcc_cv_cloog_type+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  LIBS="-lcloog-ppl ${_cloog_saved_LIBS}"
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include "cloog/cloog.h"
-   #include "cloog/ppl/cloog.h"
-int
-main ()
-{
-cloog_version ()
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  gcc_cv_cloog_type="PPL"
-else
-  gcc_cv_cloog_type=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_cloog_type" >&5
-$as_echo "$gcc_cv_cloog_type" >&6; }
-    ;;
-    *)
-      gcc_cv_cloog_type=""
-  esac
-
-  case $gcc_cv_cloog_type in
-    "PPL Legacy")
-      clooginc="${clooginc}"
-      clooglibs="${clooglibs} -lcloog"
-      cloog_org=no
-      ;;
-    "ISL")
-      clooginc="${clooginc} ${_cloogorginc}"
-      clooglibs="${clooglibs} -lcloog-isl -lisl"
-      cloog_org=yes
-      ;;
-    "PPL")
-      clooginc="${clooginc} ${_cloogorginc}"
-      clooglibs="${clooglibs} -lcloog-ppl"
-      cloog_org=yes
-      ;;
-    *)
-      clooglibs=
-      clooginc=
-      cloog_org=
-      ;;
-  esac
-
-  LIBS=$_cloog_saved_LIBS
-  CFLAGS=$_cloog_saved_CFLAGS
-  CPPFLAGS=$_cloog_saved_CPPFLAGS
-  LDFLAGS=$_cloog_saved_LDFLAGS
-
-
-
-
-
-  if test "${ENABLE_CLOOG_CHECK}" = yes ; then
-    _cloog_saved_CFLAGS=$CFLAGS
-    _cloog_saved_LDFLAGS=$LDFLAGS
-
-    CFLAGS="${_cloog_saved_CFLAGS} ${clooginc} ${pplinc} ${gmpinc}"
-    LDFLAGS="${_cloog_saved_LDFLAGS} ${clooglibs} ${ppllibs}"
-
-    if test "${cloog_org}" = yes ; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.16.1 of CLooG" >&5
-$as_echo_n "checking for version 0.16.1 of CLooG... " >&6; }
-if test "${gcc_cv_cloog_ct_0_14_0+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include "cloog/cloog.h"
-int
-main ()
-{
-#if CLOOG_VERSION_MAJOR != 0 \
-    || CLOOG_VERSION_MINOR != 16 \
-    || CLOOG_VERSION_REVISION < 1
-    choke me
-   #endif
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  gcc_cv_cloog_ct_0_14_0=yes
-else
-  gcc_cv_cloog_ct_0_14_0=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_cloog_ct_0_14_0" >&5
-$as_echo "$gcc_cv_cloog_ct_0_14_0" >&6; }
-    elif test "${cloog_org}" = no ; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.15.5 (or later revision) of CLooG" >&5
-$as_echo_n "checking for version 0.15.5 (or later revision) of CLooG... " >&6; }
-if test "${gcc_cv_cloog_ct_0_15_5+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include "cloog/cloog.h"
-int
-main ()
-{
-#if CLOOG_VERSION_MAJOR != 0 \
-    || CLOOG_VERSION_MINOR != 15 \
-    || CLOOG_VERSION_REVISION < 5
-    choke me
-   #endif
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include "cloog/cloog.h"
-int
-main ()
-{
-#if CLOOG_VERSION_MAJOR != 0 \
-    || CLOOG_VERSION_MINOR != 15 \
-    || CLOOG_VERSION_REVISION < 9
-    choke me
-   #endif
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  gcc_cv_cloog_ct_0_15_5=yes
-else
-  gcc_cv_cloog_ct_0_15_5="buggy but acceptable"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  gcc_cv_cloog_ct_0_15_5=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_cloog_ct_0_15_5" >&5
-$as_echo "$gcc_cv_cloog_ct_0_15_5" >&6; }
-    fi
-
-    CFLAGS=$_cloog_saved_CFLAGS
-    LDFLAGS=$_cloog_saved_LDFLAGS
-  fi
-
-
-
-
-
-
-
-  if test "x${with_cloog}" = xno; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_isl" >&5
+$as_echo "$gcc_cv_isl" >&6; }
+
+    if test "${gcc_cv_isl}" = no ; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: required isl version is 0.15 or later" >&5
+$as_echo "required isl version is 0.15 or later" >&6; }
+    fi
+
+    CFLAGS=$_isl_saved_CFLAGS
+    LDFLAGS=$_isl_saved_LDFLAGS
+    LIBS=$_isl_saved_LIBS
+  fi
+
+
+
+
+
+
+  if test "x${with_isl}" = xno; then
     graphite_requested=no
-  elif test "x${with_cloog}" != x \
-    || test "x${with_cloog_include}" != x \
-    || test "x${with_cloog_lib}" != x ; then
+  elif test "x${with_isl}" != x \
+    || test "x${with_isl_include}" != x \
+    || test "x${with_isl_lib}" != x ; then
     graphite_requested=yes
   else
     graphite_requested=no
@@ -6158,22 +5982,30 @@
 
 
 
-  if test "${gcc_cv_cloog_ct_0_14_0}" = no \
-    || test "${gcc_cv_cloog_rt_0_14_0}" = no \
-    || test "${gcc_cv_cloog_ct_0_15_5}" = no; then
-    clooglibs=
-    clooginc=
+  if test "${gcc_cv_isl}" = no ; then
+    isllibs=
+    islinc=
   fi
 
   if test "${graphite_requested}" = yes \
-    && test "x${clooglibs}" = x \
-    && test "x${clooginc}" = x ; then
-
-    as_fn_error "Unable to find a usable CLooG.  See config.log for details." "$LINENO" 5
-  fi
-
-
-fi
+    && test "x${isllibs}" = x \
+    && test "x${islinc}" = x ; then
+
+    as_fn_error "Unable to find a usable isl.  See config.log for details." "$LINENO" 5
+  fi
+
+
+fi
+
+# If the isl check failed, disable builds of in-tree variant of isl
+if test "x$with_isl" = xno ||
+   test "x$gcc_cv_isl" = xno; then
+  noconfigdirs="$noconfigdirs isl"
+  islinc=
+fi
+
+
+
 
 # Check for LTO support.
 # Check whether --enable-lto was given.
@@ -6190,8 +6022,9 @@
 target_elf=no
 case $target in
   *-darwin* | *-aix* | *-cygwin* | *-mingw* | *-aout* | *-*coff* | \
-  *-msdosdjgpp* | *-netware* | *-vms* | *-wince* | *-*-pe* | \
-  alpha*-dec-osf* | *-interix* | hppa[12]*-*-hpux*)
+  *-msdosdjgpp* | *-vms* | *-wince* | *-*-pe* | \
+  alpha*-dec-osf* | *-interix* | hppa[12]*-*-hpux* | \
+  nvptx-*-none)
     target_elf=no
     ;;
   *)
@@ -6206,7 +6039,7 @@
 else
   if test x"$default_enable_lto" = x"yes" ; then
     case $target in
-      *-apple-darwin9 | *-cygwin* | *-mingw*) ;;
+      *-apple-darwin[912]* | *-cygwin* | *-mingw* | *djgpp*) ;;
       # On other non-ELF platforms, LTO has yet to be validated.
       *) enable_lto=no ;;
     esac
@@ -6217,7 +6050,7 @@
   # warn during gcc/ subconfigure; unless you're bootstrapping with
   # -flto it won't be needed until after installation anyway.
     case $target in
-      *-cygwin* | *-mingw* | *-apple-darwin*) ;;
+      *-cygwin* | *-mingw* | *-apple-darwin* | *djgpp*) ;;
       *) if test x"$enable_lto" = x"yes"; then
 	as_fn_error "LTO support is not enabled for this target." "$LINENO" 5
         fi
@@ -6234,8 +6067,35 @@
 fi
 
 
-
-# By default, C is the only stage 1 language.
+# Check whether --enable-linker-plugin-configure-flags was given.
+if test "${enable_linker_plugin_configure_flags+set}" = set; then :
+  enableval=$enable_linker_plugin_configure_flags; extra_linker_plugin_configure_flags=$enableval
+else
+  extra_linker_plugin_configure_flags=
+fi
+
+
+# Check whether --enable-linker-plugin-flags was given.
+if test "${enable_linker_plugin_flags+set}" = set; then :
+  enableval=$enable_linker_plugin_flags; extra_linker_plugin_flags=$enableval
+else
+  extra_linker_plugin_flags=
+fi
+
+
+
+# Enable --enable-host-shared.
+# Checked early to determine whether jit is an 'all' language
+# Check whether --enable-host-shared was given.
+if test "${enable_host_shared+set}" = set; then :
+  enableval=$enable_host_shared; host_shared=$enableval
+else
+  host_shared=no
+fi
+
+
+
+# By default, C and C++ are the only stage 1 languages.
 stage1_languages=,c,
 
 # Target libraries that we bootstrap.
@@ -6250,15 +6110,15 @@
   if test x"${enable_languages+set}" != xset; then
     if test x"${LANGUAGES+set}" = xset; then
       enable_languages="${LANGUAGES}"
-        echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
+        echo configure.ac: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
     else
-      enable_languages=all
+      enable_languages=default
     fi
   else
     if test x"${enable_languages}" = x ||
        test x"${enable_languages}" = xyes;
        then
-      echo configure.in: --enable-languages needs at least one language argument 1>&2
+      echo configure.ac: --enable-languages needs at least one language argument 1>&2
       exit 1
     fi
   fi
@@ -6268,11 +6128,23 @@
   # and make the substitution.
   case ,${enable_languages}, in
     *,f95,*)
-      echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
+      echo configure.ac: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
       enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
       ;;
   esac
 
+  # If bootstrapping, C++ must be enabled.
+  case ",$enable_languages,:$enable_bootstrap" in
+    *,c++,*:*) ;;
+    *:yes)
+      if test -f ${srcdir}/gcc/cp/config-lang.in; then
+        enable_languages="${enable_languages},c++"
+      else
+        as_fn_error "bootstrapping requires c++ sources" "$LINENO" 5
+      fi
+      ;;
+  esac
+
   # First scan to see if an enabled language requires some other language.
   # We assume that a given config-lang.in will list all the language
   # front ends it requires, even if some are required indirectly.
@@ -6288,10 +6160,16 @@
         language=
         lang_requires=
         lang_requires_boot_languages=
-        . ${lang_frag}
+        # set srcdir during sourcing lang_frag to the gcc dir.
+        # Sadly overriding srcdir on the . line doesn't work in plain sh as it
+        # polutes this shell
+        saved_srcdir=${srcdir}
+        srcdir=${srcdir}/gcc . ${lang_frag}
+        srcdir=${saved_srcdir}
         for other in ${lang_requires} ${lang_requires_boot_languages}; do
           case ,${enable_languages}, in
 	    *,$other,*) ;;
+	    *,default,*) ;;
 	    *,all,*) ;;
 	    *,$language,*)
 	      echo " \`$other' language required by \`$language'; enabling" 1>&2
@@ -6303,6 +6181,7 @@
 	  if test "$other" != "c"; then
 	    case ,${enable_stage1_languages}, in
 	      *,$other,*) ;;
+	      *,default,*) ;;
 	      *,all,*) ;;
 	      *)
 		case ,${enable_languages}, in
@@ -6322,7 +6201,6 @@
   new_enable_languages=,c,
 
   # If LTO is enabled, add the LTO front end.
-  extra_host_libiberty_configure_flags=
   if test "$enable_lto" = "yes" ; then
     case ,${enable_languages}, in
       *,lto,*) ;;
@@ -6330,12 +6208,18 @@
     esac
     if test "${build_lto_plugin}" = "yes" ; then
       configdirs="$configdirs lto-plugin"
-      extra_host_libiberty_configure_flags=--enable-shared
-    fi
-  fi
-
-
-  missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+    fi
+  fi
+
+  # If we're building an offloading compiler, add the LTO front end.
+  if test x"$enable_as_accelerator_for" != x ; then
+    case ,${enable_languages}, in
+      *,lto,*) ;;
+      *) enable_languages="${enable_languages},lto" ;;
+    esac
+  fi
+
+  missing_languages=`echo ",$enable_languages," | sed -e s/,default,/,/ -e s/,all,/,/ -e s/,c,/,/ `
   potential_languages=,c,
 
   enabled_target_libs=
@@ -6356,39 +6240,51 @@
         subdir_requires=
         boot_language=no
         build_by_default=yes
-        . ${lang_frag}
+        # set srcdir during sourcing.  See above about save & restore
+        saved_srcdir=${srcdir}
+        srcdir=${srcdir}/gcc . ${lang_frag}
+        srcdir=${saved_srcdir}
         if test x${language} = x; then
           echo "${lang_frag} doesn't set \$language." 1>&2
           exit 1
         fi
 
-	if test "$language" = "c++" \
-	   && test "$ENABLE_BUILD_WITH_CXX" = "yes"; then
+	if test "$language" = "c++"; then
 	  boot_language=yes
 	fi
 
-        case ,${enable_languages}, in
-          *,${language},*)
-            # Language was explicitly selected; include it.
-            add_this_lang=yes
-            ;;
-          *,all,*)
-            # 'all' was selected, select it if it is a default language
-            add_this_lang=${build_by_default}
-            ;;
-          *)
-            add_this_lang=no
-            ;;
-        esac
+        add_this_lang=no
+        # C is always enabled, so no need to add it again
+        if test "$language" != "c"; then
+          case ,${enable_languages}, in
+            *,${language},*)
+              # Language was explicitly selected; include it
+	      add_this_lang=yes
+              ;;
+	    *,all,*)
+	      # All languages are enabled
+	      add_this_lang=all
+              ;;
+            *,default,*)
+              # 'default' was selected, select it if it is a default language
+	      add_this_lang=${build_by_default}
+              ;;
+          esac
+        fi
 
         # Disable languages that need other directories if these aren't available.
 	for i in $subdir_requires; do
 	  test -f "$srcdir/gcc/$i/config-lang.in" && continue
-	  case ,${enable_languages}, in
-            *,${language},*)
+	  case ${add_this_lang} in
+	    yes)
               # Specifically requested language; tell them.
               as_fn_error "The gcc/$i directory contains parts of $language but is missing" "$LINENO" 5
               ;;
+            all)
+              { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: The gcc/$i directory contains parts of $language but is missing" >&5
+$as_echo "$as_me: WARNING: The gcc/$i directory contains parts of $language but is missing" >&2;}
+              add_this_lang=unsupported
+              ;;
             *)
               # Silently disable.
               add_this_lang=unsupported
@@ -6397,20 +6293,55 @@
 	done
 
         # Disable Ada if no preexisting GNAT is available.
-        case ,${enable_languages},:${language}:${have_gnat} in
-          *,${language},*:ada:no)
+        case ${add_this_lang}:${language}:${have_gnat} in
+          yes:ada:no)
             # Specifically requested language; tell them.
             as_fn_error "GNAT is required to build $language" "$LINENO" 5
             ;;
+          all:ada:no)
+            { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: GNAT is required to build $language" >&5
+$as_echo "$as_me: WARNING: GNAT is required to build $language" >&2;}
+            add_this_lang=unsupported
+            ;;
           *:ada:no)
             # Silently disable.
             add_this_lang=unsupported
             ;;
         esac
 
-	# Disable a language that is unsupported by the target.
-	case " $unsupported_languages " in
-	  *" $language "*)
+        # Disable jit if -enable-host-shared not specified
+        case ${add_this_lang}:${language}:${host_shared} in
+          yes:jit:no)
+	    # PR jit/64780: explicitly specify --enable-host-shared
+	    as_fn_error "
+Enabling language \"jit\" requires --enable-host-shared.
+
+--enable-host-shared typically slows the rest of the compiler down by
+a few %, so you must explicitly enable it.
+
+If you want to build both the jit and the regular compiler, it is often
+best to do this via two separate configure/builds, in separate
+directories, to avoid imposing the performance cost of
+--enable-host-shared on the regular compiler." "$LINENO" 5
+	    ;;
+          all:jit:no)
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --enable-host-shared required to build $language" >&5
+$as_echo "$as_me: WARNING: --enable-host-shared required to build $language" >&2;}
+            add_this_lang=unsupported
+            ;;
+          *:jit:no)
+            # Silently disable.
+            add_this_lang=unsupported
+            ;;
+	esac
+
+        # Disable a language that is unsupported by the target.
+	case "${add_this_lang}: $unsupported_languages " in
+	  no:*) ;;
+	  unsupported:*) ;;
+	  *:*" $language "*)
+	    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ${language} not supported for this target" >&5
+$as_echo "$as_me: WARNING: ${language} not supported for this target" >&2;}
 	    add_this_lang=unsupported
 	    ;;
 	esac
@@ -6427,7 +6358,7 @@
 	    noconfigdirs="$noconfigdirs $lang_dirs"
             potential_languages="${potential_languages}${language},"
 	    ;;
-          yes)
+          all|yes)
 	    new_enable_languages="${new_enable_languages}${language},"
             potential_languages="${potential_languages}${language},"
 	    missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
@@ -6525,24 +6456,59 @@
 # Check for Boehm's garbage collector
 # Check whether --enable-objc-gc was given.
 if test "${enable_objc_gc+set}" = set; then :
-  enableval=$enable_objc_gc; case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in
-  *,objc,*:*:yes:*target-boehm-gc*)
-    as_fn_error "Boehm's garbage collector was requested yet not supported in this configuration" "$LINENO" 5
-    ;;
-esac
-fi
-
-
-# Make sure we only build Boehm's garbage collector if required.
-case ,${enable_languages},:${enable_objc_gc} in
-  *,objc,*:yes)
-    # Keep target-boehm-gc if requested for Objective-C.
+  enableval=$enable_objc_gc;
+fi
+
+
+# Check whether --with-target-bdw-gc was given.
+if test "${with_target_bdw_gc+set}" = set; then :
+  withval=$with_target_bdw_gc;
+fi
+
+
+# Check whether --with-target-bdw-gc-include was given.
+if test "${with_target_bdw_gc_include+set}" = set; then :
+  withval=$with_target_bdw_gc_include;
+fi
+
+
+# Check whether --with-target-bdw-gc-lib was given.
+if test "${with_target_bdw_gc_lib+set}" = set; then :
+  withval=$with_target_bdw_gc_lib;
+fi
+
+
+case ,${enable_languages},:${enable_objc_gc} in *,objc,*:yes|*,objc,*:auto)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for bdw garbage collector" >&5
+$as_echo_n "checking for bdw garbage collector... " >&6; }
+  if test "x$with_target_bdw_gc$with_target_bdw_gc_include$with_target_bdw_gc_lib" = x; then
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: using bdw-gc in default locations" >&5
+$as_echo "using bdw-gc in default locations" >&6; }
+  else
+        if test "x$with_target_bdw_gc_include" = x && test "x$with_target_bdw_gc_lib" != x; then
+      as_fn_error "found --with-target-bdw-gc-lib but --with-target-bdw-gc-include missing" "$LINENO" 5
+    elif test "x$with_target_bdw_gc_include" != x && test "x$with_target_bdw_gc_lib" = x; then
+      as_fn_error "found --with-target-bdw-gc-include but --with-target-bdw-gc-lib missing" "$LINENO" 5
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: using paths configured with --with-target-bdw-gc options" >&5
+$as_echo "using paths configured with --with-target-bdw-gc options" >&6; }
+    fi
+  fi
+esac
+
+# Disable libcilkrts, libitm, libsanitizer, libvtv, liboffloadmic if we're not building C++
+case ,${enable_languages}, in
+  *,c++,*)
+    # Disable libcilkrts, libitm, libsanitizer if we're not building libstdc++
+    case "${noconfigdirs}" in
+      *target-libstdc++-v3*)
+        noconfigdirs="$noconfigdirs target-libcilkrts target-libitm target-libsanitizer"
+        ;;
+      *) ;;
+    esac
     ;;
   *)
-    # Otherwise remove target-boehm-gc depending on target-libjava.
-    if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then
-      noconfigdirs="$noconfigdirs target-boehm-gc"
-    fi
+    noconfigdirs="$noconfigdirs target-libcilkrts target-liboffloadmic target-libitm target-libsanitizer target-libvtv"
     ;;
 esac
 
@@ -6585,27 +6551,6 @@
   fi
 done
 
-# Sometimes the tools are distributed with libiberty but with no other
-# libraries.  In that case, we don't want to build target-libiberty.
-# Don't let libgcc imply libiberty either.
-if test -n "${target_configdirs}" ; then
-  libgcc=
-  others=
-  for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
-    if test "$i" = "libgcc"; then
-      libgcc=target-libgcc
-    elif test "$i" != "libiberty" ; then
-      if test -r $srcdir/$i/configure ; then
-	others=yes;
-	break;
-      fi
-    fi
-  done
-  if test -z "${others}" ; then
-    target_configdirs=$libgcc
-  fi
-fi
-
 # Quietly strip out all directories which aren't configurable in this tree.
 # This relies on all configurable subdirectories being autoconfiscated, which
 # is now the case.
@@ -6635,6 +6580,41 @@
   fi
 done
 
+# libiberty-linker-plugin is special: it doesn't have its own source directory,
+# so we have to add it after the preceding checks.
+if test x"$extra_linker_plugin_flags$extra_linker_plugin_configure_flags" != x
+then
+  case " $configdirs " in
+    *" libiberty "*)
+      # If we can build libiberty, we can also build libiberty-linker-plugin.
+      configdirs="$configdirs libiberty-linker-plugin"
+      extra_linker_plugin_configure_flags="$extra_linker_plugin_configure_flags \
+        --with-libiberty=../libiberty-linker-plugin";;
+    *)
+      as_fn_error "libiberty missing" "$LINENO" 5;;
+  esac
+fi
+
+# Sometimes we have special requirements for the host libiberty.
+extra_host_libiberty_configure_flags=
+extra_host_zlib_configure_flags=
+case " $configdirs " in
+  *" lto-plugin "* | *" libcc1 "*)
+    # When these are to be built as shared libraries, the same applies to
+    # libiberty.
+    extra_host_libiberty_configure_flags=--enable-shared
+    ;;
+  *" bfd "*)
+    # When bfd is to be built as a shared library, the same applies to
+    # zlib.
+    if test "$enable_shared" = "yes"; then
+      extra_host_zlib_configure_flags=--enable-host-shared
+    fi
+    ;;
+esac
+
+
+
 # Produce a warning message for the subdirs we can't configure.
 # This isn't especially interesting in the Cygnus tree, but in the individual
 # FSF releases, it's important to let people know when their machine isn't
@@ -6691,6 +6671,20 @@
 fi
 
 
+  get_gcc_base_ver="cat"
+
+# Check whether --with-gcc-major-version-only was given.
+if test "${with_gcc_major_version_only+set}" = set; then :
+  withval=$with_gcc_major_version_only; if test x$with_gcc_major_version_only = xyes ; then
+        get_gcc_base_ver="sed -e 's/^\([0-9]*\).*\$\$/\1/'"
+      fi
+
+fi
+
+
+
+
+
 
 if test "x$exec_prefix" = xNONE; then
         if test "x$prefix" = xNONE; then
@@ -6706,7 +6700,11 @@
 # case, if there is no compiler in the tree nobody should use
 # AS_FOR_TARGET and LD_FOR_TARGET.
 if test x$host = x$build && test -f $srcdir/gcc/BASE-VER; then
-    gcc_version=`cat $srcdir/gcc/BASE-VER`
+    if test x$with_gcc_major_version_only = xyes ; then
+                gcc_version=`sed -e 's/^\([0-9]*\).*$/\1/' $srcdir/gcc/BASE-VER`
+            else
+        gcc_version=`cat $srcdir/gcc/BASE-VER`
+    fi
     gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
     gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical$PATH_SEPARATOR"
     gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
@@ -6759,29 +6757,39 @@
 # gcc) are built with "-O2 -g", so include those options when setting
 # CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
 if test "x$CFLAGS_FOR_TARGET" = x; then
-  CFLAGS_FOR_TARGET=$CFLAGS
-  case " $CFLAGS " in
-    *" -O2 "*) ;;
-    *) CFLAGS_FOR_TARGET="-O2 $CFLAGS" ;;
-  esac
-  case " $CFLAGS " in
-    *" -g "* | *" -g3 "*) ;;
-    *) CFLAGS_FOR_TARGET="-g $CFLAGS" ;;
-  esac
+  if test "x${is_cross_compiler}" = xyes; then
+    CFLAGS_FOR_TARGET="-g -O2"
+  else
+    CFLAGS_FOR_TARGET=$CFLAGS
+    case " $CFLAGS " in
+      *" -O2 "*) ;;
+      *) CFLAGS_FOR_TARGET="-O2 $CFLAGS_FOR_TARGET" ;;
+    esac
+    case " $CFLAGS " in
+      *" -g "* | *" -g3 "*) ;;
+      *) CFLAGS_FOR_TARGET="-g $CFLAGS_FOR_TARGET" ;;
+    esac
+  fi
 fi
 
 
 if test "x$CXXFLAGS_FOR_TARGET" = x; then
-  CXXFLAGS_FOR_TARGET=$CXXFLAGS
-  case " $CXXFLAGS " in
-    *" -O2 "*) ;;
-    *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS" ;;
-  esac
-  case " $CXXFLAGS " in
-    *" -g "* | *" -g3 "*) ;;
-    *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS" ;;
-  esac
-fi
+  if test "x${is_cross_compiler}" = xyes; then
+    CXXFLAGS_FOR_TARGET="-g -O2"
+  else
+    CXXFLAGS_FOR_TARGET=$CXXFLAGS
+    case " $CXXFLAGS " in
+      *" -O2 "*) ;;
+      *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS_FOR_TARGET" ;;
+    esac
+    case " $CXXFLAGS " in
+      *" -g "* | *" -g3 "*) ;;
+      *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS_FOR_TARGET" ;;
+    esac
+  fi
+fi
+
+
 
 
 # Handle --with-headers=XXX.  If the value is not "yes", the contents of
@@ -6822,7 +6830,7 @@
 # have requested that this magic not happen.
 #
 # The command line options always override the explicit settings in
-# configure.in, and the settings in configure.in override this magic.
+# configure.ac, and the settings in configure.ac override this magic.
 #
 # If the default for a toolchain is to use GNU as and ld, and you don't
 # want to do that, then you should use the --without-gnu-as and
@@ -6894,46 +6902,12 @@
 # the *-*-osname triplets last.
 md_exec_prefix=
 case "${target}" in
-  alpha*-*-*vms*)
-    md_exec_prefix=/gnu/lib/gcc-lib
-    ;;
   i[34567]86-pc-msdosdjgpp*)
     md_exec_prefix=/dev/env/DJDIR/bin
     ;;
-  i[34567]86-*-sco3.2v5*)
-    if test $with_gnu_as = yes; then
-      md_exec_prefix=/usr/gnu/bin
-    else
-      md_exec_prefix=/usr/ccs/bin/elf
-    fi
-    ;;
-
-  mn10300-*-* | \
-  powerpc-*-chorusos* | \
-  powerpc*-*-eabi* | \
-  powerpc*-*-sysv* | \
-  powerpc*-*-kaos* | \
-  s390x-ibm-tpf*)
-    md_exec_prefix=/usr/ccs/bin
-    ;;
-  sparc64-*-elf*)
-    ;;
-  v850*-*-*)
-    md_exec_prefix=/usr/ccs/bin
-    ;;
-  xtensa*-*-elf*)
-    ;;
-
-  *-*-beos* | \
-  *-*-elf* | \
   *-*-hpux* | \
-  *-*-netware* | \
   *-*-nto-qnx* | \
-  *-*-rtems* | \
-  *-*-solaris2* | \
-  *-*-sysv[45]* | \
-  *-*-vxworks* | \
-  *-wrs-windiss)
+  *-*-solaris2*)
     md_exec_prefix=/usr/ccs/bin
     ;;
 esac
@@ -6943,13 +6917,10 @@
 extra_ranlibflags_for_target=
 target_makefile_frag=/dev/null
 case "${target}" in
-  mep*-*-*)
-    target_makefile_frag="config/mt-mep"
-    ;;
   spu-*-*)
     target_makefile_frag="config/mt-spu"
     ;;
-  mips*-sde-elf*)
+  mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
     target_makefile_frag="config/mt-sde"
     ;;
   mipsisa*-*-elfoabi*)
@@ -6958,8 +6929,11 @@
   mips*-*-*linux* | mips*-*-gnu*)
     target_makefile_frag="config/mt-mips-gnu"
     ;;
-  *-*-netware*)
-    target_makefile_frag="config/mt-netware"
+  nios2-*-elf*)
+    target_makefile_frag="config/mt-nios2-elf"
+    ;;
+  *-*-linux-android*)
+    target_makefile_frag="config/mt-android"
     ;;
   *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
     target_makefile_frag="config/mt-gnu"
@@ -6971,13 +6945,6 @@
     extra_arflags_for_target=" -X32_64"
     extra_nmflags_for_target=" -B -X32_64"
     ;;
-  *-*-darwin[3-9]*)
-    # ranlib before Darwin10 requires the -c flag to look at common symbols.
-    extra_ranlibflags_for_target=" -c"
-    ;;
-  mips*-*-pe | sh*-*-pe | *arm-wince-pe)
-    target_makefile_frag="config/mt-wince"
-    ;;
 esac
 
 alphaieee_frag=/dev/null
@@ -7000,7 +6967,7 @@
   :d30v-*)
     ospace_frag="config/mt-d30v"
     ;;
-  :m32r-* | :d10v-* | :fr30-*)
+  :m32r-* | :d10v-* | :fr30-* | :i?86*-*-elfiamcu)
     ospace_frag="config/mt-ospace"
     ;;
   no:* | :*)
@@ -7010,26 +6977,6 @@
     ;;
 esac
 
-# Default to using --with-stabs for certain targets.
-if test x${with_stabs} = x ; then
-  case "${target}" in
-  mips*-*-irix[56]*)
-    ;;
-  mips*-*-* | alpha*-*-osf*)
-    with_stabs=yes;
-    extra_host_args="${extra_host_args} --with-stabs"
-    ;;
-  esac
-fi
-
-# hpux11 in 64bit mode has libraries in a weird place.  Arrange to find
-# them automatically.
-case "${host}" in
-  hppa*64*-*-hpux11*)
-    extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
-    ;;
-esac
-
 # Some systems (e.g., one of the i386-aix systems the gas testers are
 # using) don't handle "\$" correctly, so don't use it here.
 tooldir='${exec_prefix}'/${target_noncanonical}
@@ -7073,38 +7020,10 @@
 esac
 rm -f conftest*
 
-# The Solaris /usr/ucb/cc compiler does not appear to work.
-case "${host}" in
-  sparc-sun-solaris2*)
-      CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
-      if test "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ; then
-          could_use=
-          test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
-          if test -d /opt/cygnus/bin ; then
-              if test "$could_use" = "" ; then
-                  could_use="/opt/cygnus/bin"
-              else
-                  could_use="$could_use or /opt/cygnus/bin"
-              fi
-          fi
-        if test "$could_use" = "" ; then
-            echo "Warning: compilation may fail because you're using"
-            echo "/usr/ucb/cc.  You should change your PATH or CC "
-            echo "variable and rerun configure."
-        else
-            echo "Warning: compilation may fail because you're using"
-            echo "/usr/ucb/cc, when you should use the C compiler from"
-            echo "$could_use.  You should change your"
-            echo "PATH or CC variable and rerun configure."
-        fi
-      fi
-  ;;
-esac
-
 # Decide which environment variable is used to find dynamic libraries.
 case "${host}" in
   *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
-  *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+  *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
   *-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
   *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
 esac
@@ -7118,118 +7037,6 @@
   GCC_SHLIB_SUBDIR=
 fi
 
-# Record target_configdirs and the configure arguments for target and
-# build configuration in Makefile.
-target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
-build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
-
-# If we are building libgomp, bootstrap it.
-if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then
-  bootstrap_target_libs=${bootstrap_target_libs}target-libgomp,
-fi
-
-# Determine whether gdb needs tk/tcl or not.
-# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
-# and in that case we want gdb to be built without tk.  Ugh!
-# In fact I believe gdb is the *only* package directly dependent on tk,
-# so we should be able to put the 'maybe's in unconditionally and
-# leave out the maybe dependencies when enable_gdbtk is false.  I'm not
-# 100% sure that that's safe though.
-
-gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
-case "$enable_gdbtk" in
-  no)
-    GDB_TK="" ;;
-  yes)
-    GDB_TK="${gdb_tk}" ;;
-  *)
-    # Only add the dependency on gdbtk when GDBtk is part of the gdb
-    # distro.  Eventually someone will fix this and move Insight, nee
-    # gdbtk to a separate directory.
-    if test -d ${srcdir}/gdb/gdbtk ; then
-      GDB_TK="${gdb_tk}"
-    else
-      GDB_TK=""
-    fi
-    ;;
-esac
-CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
-INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
-
-# Strip out unwanted targets.
-
-# While at that, we remove Makefiles if we were started for recursive
-# configuration, so that the top-level Makefile reconfigures them,
-# like we used to do when configure itself was recursive.
-
-# Loop over modules.  We used to use the "$extrasub" feature from Autoconf
-# but now we're fixing up the Makefile ourselves with the additional
-# commands passed to AC_CONFIG_FILES.  Use separate variables
-# extrasub-{build,host,target} not because there is any reason to split
-# the substitutions up that way, but only to remain below the limit of
-# 99 commands in a script, for HP-UX sed.
-# Do not nest @if/@endif pairs, because configure will not warn you at all.
-
-# Check whether --enable-bootstrap was given.
-if test "${enable_bootstrap+set}" = set; then :
-  enableval=$enable_bootstrap;
-else
-  enable_bootstrap=default
-fi
-
-
-# Issue errors and warnings for invalid/strange bootstrap combinations.
-case "$configdirs" in
-  *gcc*) have_compiler=yes ;;
-  *) have_compiler=no ;;
-esac
-
-case "$have_compiler:$host:$target:$enable_bootstrap" in
-  *:*:*:no) ;;
-
-  # Default behavior.  Enable bootstrap if we have a compiler
-  # and we are in a native configuration.
-  yes:$build:$build:default)
-    enable_bootstrap=yes ;;
-
-  *:*:*:default)
-    enable_bootstrap=no ;;
-
-  # We have a compiler and we are in a native configuration, bootstrap is ok
-  yes:$build:$build:yes)
-    ;;
-
-  # Other configurations, but we have a compiler.  Assume the user knows
-  # what he's doing.
-  yes:*:*:yes)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: trying to bootstrap a cross compiler" >&5
-$as_echo "$as_me: WARNING: trying to bootstrap a cross compiler" >&2;}
-    ;;
-
-  # No compiler: if they passed --enable-bootstrap explicitly, fail
-  no:*:*:yes)
-    as_fn_error "cannot bootstrap without a compiler" "$LINENO" 5 ;;
-
-  # Fail if wrong command line
-  *)
-    as_fn_error "invalid option for --enable-bootstrap" "$LINENO" 5
-    ;;
-esac
-
-case ",$enable_languages,:$ENABLE_BUILD_WITH_CXX:$enable_bootstrap" in
-  *,c++,*:yes:yes) ;;
-  *:yes:yes)
-    as_fn_error "bootstrapping with --enable-build-with-cxx requires c++ in --enable-languages" "$LINENO" 5
-    ;;
-esac
-
-case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
-  yes:yes:*\ gold\ *:*,c++,*) ;;
-  yes:yes:*\ gold\ *:*)
-    as_fn_error "in a combined tree, bootstrapping with --enable-gold requires c++ in stage1_languages" "$LINENO" 5
-    ;;
-esac
-
 # Adjust the toplevel makefile according to whether bootstrap was selected.
 case $enable_bootstrap in
   yes)
@@ -7278,6 +7085,110 @@
 $as_echo "$BUILD_CONFIG" >&6; }
 
 
+# Use same top-level configure hooks in libgcc/libstdc++/libvtv.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for --enable-vtable-verify" >&5
+$as_echo_n "checking for --enable-vtable-verify... " >&6; }
+# Check whether --enable-vtable-verify was given.
+if test "${enable_vtable_verify+set}" = set; then :
+  enableval=$enable_vtable_verify; case "$enableval" in
+ yes) enable_vtable_verify=yes ;;
+ no)  enable_vtable_verify=no ;;
+ *)   enable_vtable_verify=no;;
+ esac
+else
+  enable_vtable_verify=no
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_vtable_verify" >&5
+$as_echo "$enable_vtable_verify" >&6; }
+
+# Record target_configdirs and the configure arguments for target and
+# build configuration in Makefile.
+target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
+build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
+bootstrap_fixincludes=no
+
+# If we are building libgomp, bootstrap it.
+if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then
+  bootstrap_target_libs=${bootstrap_target_libs}target-libgomp,
+fi
+
+# If we are building libsanitizer and $BUILD_CONFIG contains bootstrap-asan
+# or bootstrap-ubsan, bootstrap it.
+if echo " ${target_configdirs} " | grep " libsanitizer " > /dev/null 2>&1; then
+  case "$BUILD_CONFIG" in
+    *bootstrap-asan* | *bootstrap-ubsan* )
+      bootstrap_target_libs=${bootstrap_target_libs}target-libsanitizer,
+      bootstrap_fixincludes=yes
+      ;;
+  esac
+fi
+
+# If we are building libvtv and --enable-vtable-verify, bootstrap it.
+if echo " ${target_configdirs} " | grep " libvtv " > /dev/null 2>&1 &&
+   test "$enable_vtable_verify" != no; then
+  bootstrap_target_libs=${bootstrap_target_libs}target-libvtv,
+fi
+
+# If we are building libmpx and $BUILD_CONFIG contains bootstrap-mpx,
+# bootstrap it.
+if echo " ${target_configdirs} " | grep " libmpx " > /dev/null 2>&1; then
+  case "$BUILD_CONFIG" in
+    *bootstrap-mpx* )
+      bootstrap_target_libs=${bootstrap_target_libs}target-libmpx,
+      ;;
+  esac
+fi
+
+# Determine whether gdb needs tk/tcl or not.
+# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
+# and in that case we want gdb to be built without tk.  Ugh!
+# In fact I believe gdb is the *only* package directly dependent on tk,
+# so we should be able to put the 'maybe's in unconditionally and
+# leave out the maybe dependencies when enable_gdbtk is false.  I'm not
+# 100% sure that that's safe though.
+
+gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
+case "$enable_gdbtk" in
+  no)
+    GDB_TK="" ;;
+  yes)
+    GDB_TK="${gdb_tk}" ;;
+  *)
+    # Only add the dependency on gdbtk when GDBtk is part of the gdb
+    # distro.  Eventually someone will fix this and move Insight, nee
+    # gdbtk to a separate directory.
+    if test -d ${srcdir}/gdb/gdbtk ; then
+      GDB_TK="${gdb_tk}"
+    else
+      GDB_TK=""
+    fi
+    ;;
+esac
+CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
+INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
+
+# Strip out unwanted targets.
+
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, so that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
+
+# Loop over modules.  We used to use the "$extrasub" feature from Autoconf
+# but now we're fixing up the Makefile ourselves with the additional
+# commands passed to AC_CONFIG_FILES.  Use separate variables
+# extrasub-{build,host,target} not because there is any reason to split
+# the substitutions up that way, but only to remain below the limit of
+# 99 commands in a script, for HP-UX sed.
+# Do not nest @if/@endif pairs, because configure will not warn you at all.
+
+case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
+  yes:yes:*\ gold\ *:*,c++,*) ;;
+  yes:yes:*\ gold\ *:*)
+    as_fn_error "in a combined tree, bootstrapping with --enable-gold requires c++ in stage1_languages" "$LINENO" 5
+    ;;
+esac
+
 extrasub_build=
 for module in ${build_configdirs} ; do
   if test -z "${no_recursion}" \
@@ -7301,11 +7212,15 @@
       fi
     done
   fi
+  case ${module},${bootstrap_fixincludes} in
+    fixincludes,no) host_bootstrap_suffix=no-bootstrap ;;
+    *) host_bootstrap_suffix=$bootstrap_suffix ;;
+  esac
   extrasub_host="$extrasub_host
 /^@if $module\$/d
 /^@endif $module\$/d
-/^@if $module-$bootstrap_suffix\$/d
-/^@endif $module-$bootstrap_suffix\$/d"
+/^@if $module-$host_bootstrap_suffix\$/d
+/^@endif $module-$host_bootstrap_suffix\$/d"
 done
 extrasub_target=
 for module in ${target_configdirs} ; do
@@ -7448,7 +7363,7 @@
 
 
     case $lib in
-    mpc | mpfr | gmp | ppl | cloog)
+    mpc | mpfr | gmp | isl)
       # If we're processing --with-$lib, --with-$lib-include or
       # --with-$lib-lib, for one of the libs above, and target is
       # different from host, don't pass the current argument to any
@@ -7541,8 +7456,10 @@
 
 # For the build-side libraries, we just need to pretend we're native,
 # and not use the same cache file.  Multilibs are neither needed nor
-# desired.
-build_configargs="$build_configargs --cache-file=../config.cache ${baseargs}"
+# desired.  We can't even use the same cache file for all build-side
+# libraries, as they're compiled differently; some with C, some with
+# C++ or with different feature-enabling options.
+build_configargs="$build_configargs --cache-file=./config.cache ${baseargs}"
 
 # For host modules, accept cache file option, or specification as blank.
 case "${cache_file}" in
@@ -7569,6 +7486,26 @@
   target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}"
 fi
 
+# Special user-friendly check for native x86_64-linux build, if
+# multilib is not explicitly enabled.
+case "$target:$have_compiler:$host:$target:$enable_multilib" in
+  x86_64-*linux*:yes:$build:$build:)
+    # Make sure we have a development environment that handles 32-bit
+    dev64=no
+    echo "int main () { return 0; }" > conftest.c
+    ${CC} -m32 -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
+    if test $? = 0 ; then
+      if test -s conftest || test -s conftest.exe ; then
+	dev64=yes
+      fi
+    fi
+    rm -f conftest*
+    if test x${dev64} != xyes ; then
+      as_fn_error "I suspect your system does not have 32-bit development libraries (libc and headers). If you have them, rerun configure with --enable-multilib. If you do not have them, and want to build a 64-bit-only compiler, rerun configure with --disable-multilib." "$LINENO" 5
+    fi
+    ;;
+esac
+
 # Default to --enable-multilib.
 if test x${enable_multilib} = x ; then
   target_configargs="--enable-multilib ${target_configargs}"
@@ -7601,7 +7538,7 @@
   *" --with-newlib "*)
    case "$target" in
     *-cygwin*)
-      FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include'
+      FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -isystem $$s/winsup/cygwin/include'
       ;;
    esac
 
@@ -7753,8 +7690,6 @@
 
 
 
-
-
 # Generate default definitions for YACC, M4, LEX and other programs that run
 # on the build machine.  These are used if the Makefile can't locate these
 # programs in objdir.
@@ -7805,7 +7740,6 @@
 
 case " $build_configdirs " in
   *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
-  *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
 esac
 
 for ac_prog in bison
@@ -9847,6 +9781,147 @@
 
 
 
+if test -n "$READELF"; then
+  ac_cv_prog_READELF=$READELF
+elif test -n "$ac_cv_prog_READELF"; then
+  READELF=$ac_cv_prog_READELF
+fi
+
+if test -n "$ac_cv_prog_READELF"; then
+  for ncn_progname in readelf; do
+    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_READELF+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$READELF"; then
+  ac_cv_prog_READELF="$READELF" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_READELF="${ncn_progname}"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+READELF=$ac_cv_prog_READELF
+if test -n "$READELF"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF" >&5
+$as_echo "$READELF" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  done
+fi
+
+for ncn_progname in readelf; do
+  if test -n "$ncn_tool_prefix"; then
+    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_READELF+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$READELF"; then
+  ac_cv_prog_READELF="$READELF" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_READELF="${ncn_tool_prefix}${ncn_progname}"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+READELF=$ac_cv_prog_READELF
+if test -n "$READELF"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF" >&5
+$as_echo "$READELF" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+  if test -z "$ac_cv_prog_READELF" && test $build = $host ; then
+    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_READELF+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$READELF"; then
+  ac_cv_prog_READELF="$READELF" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_READELF="${ncn_progname}"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+READELF=$ac_cv_prog_READELF
+if test -n "$READELF"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF" >&5
+$as_echo "$READELF" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+  test -n "$ac_cv_prog_READELF" && break
+done
+
+if test -z "$ac_cv_prog_READELF" ; then
+  set dummy readelf
+  if test $build = $host ; then
+    READELF="$2"
+  else
+    READELF="${ncn_tool_prefix}$2"
+  fi
+fi
+
+
+
 
 
 
@@ -10347,167 +10422,6 @@
 
 
 
-if test -n "$GCJ_FOR_TARGET"; then
-  ac_cv_prog_GCJ_FOR_TARGET=$GCJ_FOR_TARGET
-elif test -n "$ac_cv_prog_GCJ_FOR_TARGET"; then
-  GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
-fi
-
-if test -n "$ac_cv_prog_GCJ_FOR_TARGET"; then
-  for ncn_progname in gcj; do
-    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$GCJ_FOR_TARGET"; then
-  ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
-if test -n "$GCJ_FOR_TARGET"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCJ_FOR_TARGET" >&5
-$as_echo "$GCJ_FOR_TARGET" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  done
-fi
-
-if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test -n "$with_build_time_tools"; then
-  for ncn_progname in gcj; do
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
-$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
-    if test -x $with_build_time_tools/${ncn_progname}; then
-      ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/${ncn_progname}
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-      break
-    else
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-    fi
-  done
-fi
-
-if test -z "$ac_cv_prog_GCJ_FOR_TARGET"; then
-  for ncn_progname in gcj; do
-    if test -n "$ncn_target_tool_prefix"; then
-      # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$GCJ_FOR_TARGET"; then
-  ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
-if test -n "$GCJ_FOR_TARGET"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCJ_FOR_TARGET" >&5
-$as_echo "$GCJ_FOR_TARGET" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    fi
-    if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
-      # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$GCJ_FOR_TARGET"; then
-  ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
-if test -n "$GCJ_FOR_TARGET"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCJ_FOR_TARGET" >&5
-$as_echo "$GCJ_FOR_TARGET" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    fi
-    test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
-  done
-fi
-
-if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
-  set dummy gcj
-  if test $build = $target ; then
-    GCJ_FOR_TARGET="$2"
-  else
-    GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
-  fi
-else
-  GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
-fi
-
-
-
 if test -n "$GFORTRAN_FOR_TARGET"; then
   ac_cv_prog_GFORTRAN_FOR_TARGET=$GFORTRAN_FOR_TARGET
 elif test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET"; then
@@ -12226,6 +12140,236 @@
 
 
 
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" ; then
+  if test -n "$with_build_time_tools"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objcopy in $with_build_time_tools" >&5
+$as_echo_n "checking for objcopy in $with_build_time_tools... " >&6; }
+    if test -x $with_build_time_tools/objcopy; then
+      OBJCOPY_FOR_TARGET=`cd $with_build_time_tools && pwd`/objcopy
+      ac_cv_path_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_OBJCOPY_FOR_TARGET" >&5
+$as_echo "$ac_cv_path_OBJCOPY_FOR_TARGET" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+  elif test $build != $host && test $have_gcc_for_target = yes; then
+    OBJCOPY_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=objcopy`
+    test $OBJCOPY_FOR_TARGET = objcopy && OBJCOPY_FOR_TARGET=
+    test -n "$OBJCOPY_FOR_TARGET" && ac_cv_path_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+  fi
+fi
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+  # Extract the first word of "objcopy", so it can be a program name with args.
+set dummy objcopy; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_OBJCOPY_FOR_TARGET+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $OBJCOPY_FOR_TARGET in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_path_OBJCOPY_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_path_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" ; then
+
+
+if test -n "$OBJCOPY_FOR_TARGET"; then
+  ac_cv_prog_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+elif test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+  OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+  for ncn_progname in objcopy; do
+    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJCOPY_FOR_TARGET"; then
+  ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_progname}"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  done
+fi
+
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" && test -n "$with_build_time_tools"; then
+  for ncn_progname in objcopy; do
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
+$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_OBJCOPY_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+      break
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+  done
+fi
+
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+  for ncn_progname in objcopy; do
+    if test -n "$ncn_target_tool_prefix"; then
+      # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJCOPY_FOR_TARGET"; then
+  ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    fi
+    if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" && test $build = $target ; then
+      # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJCOPY_FOR_TARGET"; then
+  ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_progname}"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    fi
+    test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET" && break
+  done
+fi
+
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" ; then
+  set dummy objcopy
+  if test $build = $target ; then
+    OBJCOPY_FOR_TARGET="$2"
+  else
+    OBJCOPY_FOR_TARGET="${ncn_target_tool_prefix}$2"
+  fi
+else
+  OBJCOPY_FOR_TARGET="$ac_cv_prog_OBJCOPY_FOR_TARGET"
+fi
+
+else
+  OBJCOPY_FOR_TARGET=$ac_cv_path_OBJCOPY_FOR_TARGET
+fi
+
+
+
+
 if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdump in $with_build_time_tools" >&5
@@ -12686,6 +12830,236 @@
 
 
 
+if test -z "$ac_cv_path_READELF_FOR_TARGET" ; then
+  if test -n "$with_build_time_tools"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for readelf in $with_build_time_tools" >&5
+$as_echo_n "checking for readelf in $with_build_time_tools... " >&6; }
+    if test -x $with_build_time_tools/readelf; then
+      READELF_FOR_TARGET=`cd $with_build_time_tools && pwd`/readelf
+      ac_cv_path_READELF_FOR_TARGET=$READELF_FOR_TARGET
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_READELF_FOR_TARGET" >&5
+$as_echo "$ac_cv_path_READELF_FOR_TARGET" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+  elif test $build != $host && test $have_gcc_for_target = yes; then
+    READELF_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=readelf`
+    test $READELF_FOR_TARGET = readelf && READELF_FOR_TARGET=
+    test -n "$READELF_FOR_TARGET" && ac_cv_path_READELF_FOR_TARGET=$READELF_FOR_TARGET
+  fi
+fi
+if test -z "$ac_cv_path_READELF_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+  # Extract the first word of "readelf", so it can be a program name with args.
+set dummy readelf; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_READELF_FOR_TARGET+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $READELF_FOR_TARGET in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_READELF_FOR_TARGET="$READELF_FOR_TARGET" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_path_READELF_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+READELF_FOR_TARGET=$ac_cv_path_READELF_FOR_TARGET
+if test -n "$READELF_FOR_TARGET"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF_FOR_TARGET" >&5
+$as_echo "$READELF_FOR_TARGET" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_READELF_FOR_TARGET" ; then
+
+
+if test -n "$READELF_FOR_TARGET"; then
+  ac_cv_prog_READELF_FOR_TARGET=$READELF_FOR_TARGET
+elif test -n "$ac_cv_prog_READELF_FOR_TARGET"; then
+  READELF_FOR_TARGET=$ac_cv_prog_READELF_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_READELF_FOR_TARGET"; then
+  for ncn_progname in readelf; do
+    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_READELF_FOR_TARGET+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$READELF_FOR_TARGET"; then
+  ac_cv_prog_READELF_FOR_TARGET="$READELF_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_READELF_FOR_TARGET="${ncn_progname}"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+READELF_FOR_TARGET=$ac_cv_prog_READELF_FOR_TARGET
+if test -n "$READELF_FOR_TARGET"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF_FOR_TARGET" >&5
+$as_echo "$READELF_FOR_TARGET" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  done
+fi
+
+if test -z "$ac_cv_prog_READELF_FOR_TARGET" && test -n "$with_build_time_tools"; then
+  for ncn_progname in readelf; do
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
+$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_READELF_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+      break
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+  done
+fi
+
+if test -z "$ac_cv_prog_READELF_FOR_TARGET"; then
+  for ncn_progname in readelf; do
+    if test -n "$ncn_target_tool_prefix"; then
+      # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_READELF_FOR_TARGET+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$READELF_FOR_TARGET"; then
+  ac_cv_prog_READELF_FOR_TARGET="$READELF_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_READELF_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+READELF_FOR_TARGET=$ac_cv_prog_READELF_FOR_TARGET
+if test -n "$READELF_FOR_TARGET"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF_FOR_TARGET" >&5
+$as_echo "$READELF_FOR_TARGET" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    fi
+    if test -z "$ac_cv_prog_READELF_FOR_TARGET" && test $build = $target ; then
+      # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_READELF_FOR_TARGET+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$READELF_FOR_TARGET"; then
+  ac_cv_prog_READELF_FOR_TARGET="$READELF_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_READELF_FOR_TARGET="${ncn_progname}"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+READELF_FOR_TARGET=$ac_cv_prog_READELF_FOR_TARGET
+if test -n "$READELF_FOR_TARGET"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF_FOR_TARGET" >&5
+$as_echo "$READELF_FOR_TARGET" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    fi
+    test -n "$ac_cv_prog_READELF_FOR_TARGET" && break
+  done
+fi
+
+if test -z "$ac_cv_prog_READELF_FOR_TARGET" ; then
+  set dummy readelf
+  if test $build = $target ; then
+    READELF_FOR_TARGET="$2"
+  else
+    READELF_FOR_TARGET="${ncn_target_tool_prefix}$2"
+  fi
+else
+  READELF_FOR_TARGET="$ac_cv_prog_READELF_FOR_TARGET"
+fi
+
+else
+  READELF_FOR_TARGET=$ac_cv_path_READELF_FOR_TARGET
+fi
+
+
+
+
 if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for strip in $with_build_time_tools" >&5
@@ -13527,7 +13901,7 @@
   esac
   if test $ok = yes; then
     # An in-tree tool is available and we can use it
-    CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+    CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xg++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs'
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
 $as_echo "just compiled" >&6; }
   elif expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
@@ -13572,7 +13946,7 @@
   esac
   if test $ok = yes; then
     # An in-tree tool is available and we can use it
-    RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+    RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs'
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
 $as_echo "just compiled" >&6; }
   elif expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
@@ -13676,51 +14050,6 @@
   fi
 fi
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target gcj" >&5
-$as_echo_n "checking where to find the target gcj... " >&6; }
-if test "x${build}" != "x${host}" ; then
-  if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
-    # We already found the complete path
-    ac_dir=`dirname $GCJ_FOR_TARGET`
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
-$as_echo "pre-installed in $ac_dir" >&6; }
-  else
-    # Canadian cross, just use what we found
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
-$as_echo "pre-installed" >&6; }
-  fi
-else
-  ok=yes
-  case " ${configdirs} " in
-    *" gcc "*) ;;
-    *) ok=no ;;
-  esac
-  case ,${enable_languages}, in
-    *,java,*) ;;
-    *) ok=no ;;
-  esac
-  if test $ok = yes; then
-    # An in-tree tool is available and we can use it
-    GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
-$as_echo "just compiled" >&6; }
-  elif expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
-    # We already found the complete path
-    ac_dir=`dirname $GCJ_FOR_TARGET`
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
-$as_echo "pre-installed in $ac_dir" >&6; }
-  elif test "x$target" = "x$host"; then
-    # We can use an host tool
-    GCJ_FOR_TARGET='$(GCJ)'
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
-$as_echo "host tool" >&6; }
-  else
-    # We need a cross tool
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
-$as_echo "pre-installed" >&6; }
-  fi
-fi
-
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target gfortran" >&5
 $as_echo_n "checking where to find the target gfortran... " >&6; }
 if test "x${build}" != "x${host}" ; then
@@ -13926,6 +14255,48 @@
   fi
 fi
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target objcopy" >&5
+$as_echo_n "checking where to find the target objcopy... " >&6; }
+if test "x${build}" != "x${host}" ; then
+  if expr "x$OBJCOPY_FOR_TARGET" : "x/" > /dev/null; then
+    # We already found the complete path
+    ac_dir=`dirname $OBJCOPY_FOR_TARGET`
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+  else
+    # Canadian cross, just use what we found
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+  fi
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    OBJCOPY_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objcopy'
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
+$as_echo "just compiled" >&6; }
+  elif expr "x$OBJCOPY_FOR_TARGET" : "x/" > /dev/null; then
+    # We already found the complete path
+    ac_dir=`dirname $OBJCOPY_FOR_TARGET`
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    OBJCOPY_FOR_TARGET='$(OBJCOPY)'
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
+$as_echo "host tool" >&6; }
+  else
+    # We need a cross tool
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+  fi
+fi
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target objdump" >&5
 $as_echo_n "checking where to find the target objdump... " >&6; }
 if test "x${build}" != "x${host}" ; then
@@ -14010,6 +14381,48 @@
   fi
 fi
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target readelf" >&5
+$as_echo_n "checking where to find the target readelf... " >&6; }
+if test "x${build}" != "x${host}" ; then
+  if expr "x$READELF_FOR_TARGET" : "x/" > /dev/null; then
+    # We already found the complete path
+    ac_dir=`dirname $READELF_FOR_TARGET`
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+  else
+    # Canadian cross, just use what we found
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+  fi
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    READELF_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/readelf'
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
+$as_echo "just compiled" >&6; }
+  elif expr "x$READELF_FOR_TARGET" : "x/" > /dev/null; then
+    # We already found the complete path
+    ac_dir=`dirname $READELF_FOR_TARGET`
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    READELF_FOR_TARGET='$(READELF)'
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
+$as_echo "host tool" >&6; }
+  else
+    # We need a cross tool
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+  fi
+fi
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target strip" >&5
 $as_echo_n "checking where to find the target strip... " >&6; }
 if test "x${build}" != "x${host}" ; then
@@ -14200,43 +14613,6 @@
     esac ;;
 esac
 
-# This is aimed to mimic bootstrap with a non-GCC compiler to catch problems.
-if test "$GCC" = yes -a "$ENABLE_BUILD_WITH_CXX" != yes; then
-  saved_CFLAGS="$CFLAGS"
-
-  # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it.
-  CFLAGS="$CFLAGS -fkeep-inline-functions"
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -fkeep-inline-functions is supported" >&5
-$as_echo_n "checking whether -fkeep-inline-functions is supported... " >&6; }
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#if (__GNUC__ < 3) \
-    || (__GNUC__ == 3 && (__GNUC_MINOR__ < 3 \
-			  || (__GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ < 1)))
-#error http://gcc.gnu.org/PR29382
-#endif
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }; stage1_cflags="$stage1_cflags -fkeep-inline-functions"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-  CFLAGS="$saved_CFLAGS"
-fi
-
 
 
 # Enable --enable-checking in stage1 of the compiler.
@@ -14245,7 +14621,20 @@
   enableval=$enable_stage1_checking; stage1_checking=--enable-checking=${enable_stage1_checking}
 else
   if test "x$enable_checking" = xno || test "x$enable_checking" = x; then
-  stage1_checking=--enable-checking=yes,types
+  # For --disable-checking or implicit --enable-checking=release, avoid
+  # setting --enable-checking=gc in the default stage1 checking for LTO
+  # bootstraps.  See PR62077.
+  case $BUILD_CONFIG in
+    *lto*)
+      stage1_checking=--enable-checking=release,misc,gimple,rtlflag,tree,types;;
+    *)
+      stage1_checking=--enable-checking=yes,types;;
+  esac
+  if test "x$enable_checking" = x && \
+     test -d ${srcdir}/gcc && \
+     test x"`cat ${srcdir}/gcc/DEV-PHASE`" = xexperimental; then
+    stage1_checking=--enable-checking=yes,types,extra
+  fi
 else
   stage1_checking=--enable-checking=$enable_checking,types
 fi
@@ -14257,29 +14646,34 @@
 # Check whether --enable-werror was given.
 if test "${enable_werror+set}" = set; then :
   enableval=$enable_werror;
-else
-  if test -d ${srcdir}/gcc && test x"`cat $srcdir/gcc/DEV-PHASE`" = xexperimental; then
-  enable_werror=yes
-else
-  enable_werror=no
-fi
-fi
-
 case ${enable_werror} in
   yes) stage2_werror_flag="--enable-werror-always" ;;
   *) stage2_werror_flag="" ;;
 esac
 
+else
+
+if test -d ${srcdir}/gcc && test x"`cat $srcdir/gcc/DEV-PHASE`" = xexperimental; then
+  case $BUILD_CONFIG in
+  bootstrap-debug)
+      stage2_werror_flag="--enable-werror-always" ;;
+  "")
+      stage2_werror_flag="--enable-werror-always" ;;
+  esac
+fi
+
+fi
+
+
+
 
 # Specify what files to not compare during bootstrap.
 
 compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
 case "$target" in
   hppa*64*-*-hpux*) ;;
-  hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/*" ;;
-esac
-case " $configdirs " in
-*" ppl "*) compare_exclusions="$compare_exclusions | ppl/src/ppl-config.o" ;;
+  hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/* | gcc/function-tests.o" ;;
+  powerpc*-ibm-aix*) compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/* | *libgomp*\$(objext)" ;;
 esac