--- a/zlib/make_vms.com	Sun Aug 21 07:07:55 2011 +0900
+++ b/zlib/make_vms.com	Fri Oct 27 22:46:09 2017 +0900
@@ -1,46 +1,95 @@
 $! make libz under VMS written by
 $! Martin P.J. Zinser
-$! <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com>
+$!
+$! In case of problems with the install you might contact me at
+$! zinser@zinser.no-ip.info(preferred) or
+$! martin.zinser@eurexchange.com (work)
+$!
+$! Make procedure history for Zlib
+$!
+$!------------------------------------------------------------------------------
+$! Version history
+$! 0.01 20060120 First version to receive a number
+$! 0.02 20061008 Adapt to new Makefile.in
+$! 0.03 20091224 Add support for large file check
+$! 0.04 20100110 Add new gzclose, gzlib, gzread, gzwrite
+$! 0.05 20100221 Exchange zlibdefs.h by zconf.h.in
+$! 0.06 20120111 Fix missing amiss_err, update zconf_h.in, fix new exmples
+$!               subdir path, update module search in makefile.in
+$! 0.07 20120115 Triggered by work done by Alexey Chupahin completly redesigned
+$!               shared image creation
+$! 0.08 20120219 Make it work on VAX again, pre-load missing symbols to shared
+$!               image
+$! 0.09 20120305 SMS.  P1 sets builder ("MMK", "MMS", " " (built-in)).
+$!               "" -> automatic, preference: MMK, MMS, built-in.
 $!
 $ on error then goto err_exit
 $!
-$!
-$! Just some general constants...
-$!
 $ true  = 1
 $ false = 0
 $ tmpnam = "temp_" + f$getjpi("","pid")
-$ SAY = "WRITE SYS$OUTPUT"
+$ tt = tmpnam + ".txt"
+$ tc = tmpnam + ".c"
+$ th = tmpnam + ".h"
+$ define/nolog tconfig 'th'
+$ its_decc = false
+$ its_vaxc = false
+$ its_gnuc = false
+$ s_case   = False
 $!
 $! Setup variables holding "config" information
 $!
-$ Make     = ""
+$ Make    = "''p1'"
 $ name     = "Zlib"
 $ version  = "?.?.?"
 $ v_string = "ZLIB_VERSION"
 $ v_file   = "zlib.h"
-$ ccopt    = ""
-$ lopts    = ""
+$ ccopt   = "/include = []"
+$ lopts   = ""
+$ dnsrl   = ""
+$ aconf_in_file = "zconf.h.in#zconf.h_in#zconf_h.in"
+$ conf_check_string = ""
 $ linkonly = false
 $ optfile  = name + ".opt"
-$ its_decc = false
-$ its_vaxc = false
-$ its_gnuc = false
-$ axp      = f$getsyi("HW_MODEL").ge.1024
-$ s_case   = false
+$ mapfile  = name + ".map"
+$ libdefs  = ""
+$ vax      = f$getsyi("HW_MODEL").lt.1024
+$ axp      = f$getsyi("HW_MODEL").ge.1024 .and. f$getsyi("HW_MODEL").lt.4096
+$ ia64     = f$getsyi("HW_MODEL").ge.4096
+$!
+$! 2012-03-05 SMS.
+$! Why is this needed?  And if it is needed, why not simply ".not. vax"?
+$!
+$!!! if axp .or. ia64 then  set proc/parse=extended
+$!
+$ whoami = f$parse(f$environment("Procedure"),,,,"NO_CONCEAL")
+$ mydef  = F$parse(whoami,,,"DEVICE")
+$ mydir  = f$parse(whoami,,,"DIRECTORY") - "]["
+$ myproc = f$parse(whoami,,,"Name") + f$parse(whoami,,,"type")
+$!
 $! Check for MMK/MMS
 $!
-$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
-$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
-$!
+$ if (Make .eqs. "")
+$ then
+$   If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
+$   If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
+$ else
+$   Make = f$edit( Make, "trim")
+$ endif
 $!
 $ gosub find_version
 $!
+$  open/write topt tmp.opt
+$  open/write optf 'optfile'
+$!
 $ gosub check_opts
 $!
 $! Look for the compiler used
 $!
 $ gosub check_compiler
+$ close topt
+$ close optf
+$!
 $ if its_decc
 $ then
 $   ccopt = "/prefix=all" + ccopt
@@ -54,18 +103,79 @@
 $       define sys decc$library_include:
 $     endif
 $   endif
+$!
+$! 2012-03-05 SMS.
+$! Why /NAMES = AS_IS?  Why not simply ".not. vax"?  And why not on VAX?
+$!
+$   if axp .or. ia64
+$   then
+$       ccopt = ccopt + "/name=as_is/opt=(inline=speed)"
+$       s_case = true
+$   endif
 $ endif
 $ if its_vaxc .or. its_gnuc
 $ then
 $    if f$trnlnm("SYS").eqs."" then define sys sys$library:
 $ endif
 $!
+$! Build a fake configure input header
+$!
+$ open/write conf_hin config.hin
+$ write conf_hin "#undef _LARGEFILE64_SOURCE"
+$ close conf_hin
+$!
+$!
+$ i = 0
+$FIND_ACONF:
+$ fname = f$element(i,"#",aconf_in_file)
+$ if fname .eqs. "#" then goto AMISS_ERR
+$ if f$search(fname) .eqs. ""
+$ then
+$   i = i + 1
+$   goto find_aconf
+$ endif
+$ open/read/err=aconf_err aconf_in 'fname'
+$ open/write aconf zconf.h
+$ACONF_LOOP:
+$ read/end_of_file=aconf_exit aconf_in line
+$ work = f$edit(line, "compress,trim")
+$ if f$extract(0,6,work) .nes. "#undef"
+$ then
+$   if f$extract(0,12,work) .nes. "#cmakedefine"
+$   then
+$       write aconf line
+$   endif
+$ else
+$   cdef = f$element(1," ",work)
+$   gosub check_config
+$ endif
+$ goto aconf_loop
+$ACONF_EXIT:
+$ write aconf ""
+$ write aconf "/* VMS specifics added by make_vms.com: */"
+$ write aconf "#define VMS 1"
+$ write aconf "#include <unistd.h>"
+$ write aconf "#include <unixio.h>"
+$ write aconf "#ifdef _LARGEFILE"
+$ write aconf "# define off64_t __off64_t"
+$ write aconf "# define fopen64 fopen"
+$ write aconf "# define fseeko64 fseeko"
+$ write aconf "# define lseek64 lseek"
+$ write aconf "# define ftello64 ftell"
+$ write aconf "#endif"
+$ write aconf "#if !defined( __VAX) && (__CRTL_VER >= 70312000)"
+$ write aconf "# define HAVE_VSNPRINTF"
+$ write aconf "#endif"
+$ close aconf_in
+$ close aconf
+$ if f$search("''th'") .nes. "" then delete 'th';*
 $! Build the thing plain or with mms
 $!
 $ write sys$output "Compiling Zlib sources ..."
 $ if make.eqs.""
-$  then
-$   dele example.obj;*,minigzip.obj;*
+$ then
+$   if (f$search( "example.obj;*") .nes. "") then delete example.obj;*
+$   if (f$search( "minigzip.obj;*") .nes. "") then delete minigzip.obj;*
 $   CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
                 adler32.c zlib.h zconf.h
 $   CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
@@ -74,8 +184,14 @@
                 crc32.c zlib.h zconf.h
 $   CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
                 deflate.c deflate.h zutil.h zlib.h zconf.h
-$   CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
-                gzio.c zutil.h zlib.h zconf.h
+$   CALL MAKE gzclose.OBJ "CC ''CCOPT' gzclose" -
+                gzclose.c zutil.h zlib.h zconf.h
+$   CALL MAKE gzlib.OBJ "CC ''CCOPT' gzlib" -
+                gzlib.c zutil.h zlib.h zconf.h
+$   CALL MAKE gzread.OBJ "CC ''CCOPT' gzread" -
+                gzread.c zutil.h zlib.h zconf.h
+$   CALL MAKE gzwrite.OBJ "CC ''CCOPT' gzwrite" -
+                gzwrite.c zutil.h zlib.h zconf.h
 $   CALL MAKE infback.OBJ "CC ''CCOPT' infback" -
                 infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
 $   CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
@@ -93,46 +209,47 @@
 $   write sys$output "Building Zlib ..."
 $   CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
 $   write sys$output "Building example..."
-$   CALL MAKE example.OBJ "CC ''CCOPT' example" -
-                example.c zlib.h zconf.h
+$   CALL MAKE example.OBJ "CC ''CCOPT' [.test]example" -
+                [.test]example.c zlib.h zconf.h
 $   call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
-$   if f$search("x11vms:xvmsutils.olb") .nes. ""
-$   then
-$     write sys$output "Building minigzip..."
-$     CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
-                minigzip.c zlib.h zconf.h
-$     call make minigzip.exe -
-                "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" -
-                minigzip.obj libz.olb
-$   endif
-$  else
+$   write sys$output "Building minigzip..."
+$   CALL MAKE minigzip.OBJ "CC ''CCOPT' [.test]minigzip" -
+              [.test]minigzip.c zlib.h zconf.h
+$   call make minigzip.exe -
+              "LINK minigzip,libz.olb/lib" -
+              minigzip.obj libz.olb
+$ else
 $   gosub crea_mms
-$   SAY "Make ''name' ''version' with ''Make' "
+$   write sys$output "Make ''name' ''version' with ''Make' "
 $   'make'
-$  endif
+$ endif
 $!
-$! Alpha gets a shareable image
+$! Create shareable image
 $!
-$ If axp
-$ Then
-$   gosub crea_olist
-$   write sys$output "Creating libzshr.exe"
-$   call anal_obj_axp modules.opt _link.opt
-$   if s_case
-$   then
-$      open/append optf modules.opt
-$      write optf "case_sensitive=YES"
-$      close optf
-$   endif
-$   LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,_link.opt/opt
-$ endif
+$ gosub crea_olist
+$ write sys$output "Creating libzshr.exe"
+$ call map_2_shopt 'mapfile' 'optfile'
+$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,'optfile'/opt
 $ write sys$output "Zlib build completed"
+$ delete/nolog tmp.opt;*
 $ exit
+$AMISS_ERR:
+$ write sys$output "No source for config.hin found."
+$ write sys$output "Tried any of ''aconf_in_file'"
+$ goto err_exit
 $CC_ERR:
 $ write sys$output "C compiler required to build ''name'"
 $ goto err_exit
 $ERR_EXIT:
 $ set message/facil/ident/sever/text
+$ close/nolog optf
+$ close/nolog topt
+$ close/nolog aconf_in
+$ close/nolog aconf
+$ close/nolog out
+$ close/nolog min
+$ close/nolog mod
+$ close/nolog h_in
 $ write sys$output "Exiting..."
 $ exit 2
 $!
@@ -180,61 +297,72 @@
 $!
 $! Check command line options and set symbols accordingly
 $!
+$!------------------------------------------------------------------------------
+$! Version history
+$! 0.01 20041206 First version to receive a number
+$! 0.02 20060126 Add new "HELP" target
 $ CHECK_OPTS:
 $ i = 1
 $ OPT_LOOP:
 $ if i .lt. 9
 $ then
 $   cparm = f$edit(p'i',"upcase")
-$   if cparm .eqs. "DEBUG"
-$   then
-$     ccopt = ccopt + "/noopt/deb"
-$     lopts = lopts + "/deb"
-$   endif
-$   if f$locate("CCOPT=",cparm) .lt. f$length(cparm)
-$   then
-$     start = f$locate("=",cparm) + 1
-$     len   = f$length(cparm) - start
-$     ccopt = ccopt + f$extract(start,len,cparm)
-$     if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
-         then s_case = true
-$   endif
-$   if cparm .eqs. "LINK" then linkonly = true
-$   if f$locate("LOPTS=",cparm) .lt. f$length(cparm)
-$   then
-$     start = f$locate("=",cparm) + 1
-$     len   = f$length(cparm) - start
-$     lopts = lopts + f$extract(start,len,cparm)
-$   endif
-$   if f$locate("CC=",cparm) .lt. f$length(cparm)
+$!
+$! Check if parameter actually contains something
+$!
+$   if f$edit(cparm,"trim") .nes. ""
 $   then
-$     start  = f$locate("=",cparm) + 1
-$     len    = f$length(cparm) - start
-$     cc_com = f$extract(start,len,cparm)
-      if (cc_com .nes. "DECC") .and. -
-         (cc_com .nes. "VAXC") .and. -
-	 (cc_com .nes. "GNUC")
+$     if cparm .eqs. "DEBUG"
+$     then
+$       ccopt = ccopt + "/noopt/deb"
+$       lopts = lopts + "/deb"
+$     endif
+$     if f$locate("CCOPT=",cparm) .lt. f$length(cparm)
 $     then
-$       write sys$output "Unsupported compiler choice ''cc_com' ignored"
-$       write sys$output "Use DECC, VAXC, or GNUC instead"
-$     else
-$     	if cc_com .eqs. "DECC" then its_decc = true
-$     	if cc_com .eqs. "VAXC" then its_vaxc = true
-$     	if cc_com .eqs. "GNUC" then its_gnuc = true
+$       start = f$locate("=",cparm) + 1
+$       len   = f$length(cparm) - start
+$       ccopt = ccopt + f$extract(start,len,cparm)
+$       if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
+          then s_case = true
+$     endif
+$     if cparm .eqs. "LINK" then linkonly = true
+$     if f$locate("LOPTS=",cparm) .lt. f$length(cparm)
+$     then
+$       start = f$locate("=",cparm) + 1
+$       len   = f$length(cparm) - start
+$       lopts = lopts + f$extract(start,len,cparm)
 $     endif
-$   endif
-$   if f$locate("MAKE=",cparm) .lt. f$length(cparm)
-$   then
-$     start  = f$locate("=",cparm) + 1
-$     len    = f$length(cparm) - start
-$     mmks = f$extract(start,len,cparm)
-$     if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS")
+$     if f$locate("CC=",cparm) .lt. f$length(cparm)
 $     then
-$       make = mmks
-$     else
-$       write sys$output "Unsupported make choice ''mmks' ignored"
-$       write sys$output "Use MMK or MMS instead"
+$       start  = f$locate("=",cparm) + 1
+$       len    = f$length(cparm) - start
+$       cc_com = f$extract(start,len,cparm)
+        if (cc_com .nes. "DECC") .and. -
+           (cc_com .nes. "VAXC") .and. -
+           (cc_com .nes. "GNUC")
+$       then
+$         write sys$output "Unsupported compiler choice ''cc_com' ignored"
+$         write sys$output "Use DECC, VAXC, or GNUC instead"
+$       else
+$         if cc_com .eqs. "DECC" then its_decc = true
+$         if cc_com .eqs. "VAXC" then its_vaxc = true
+$         if cc_com .eqs. "GNUC" then its_gnuc = true
+$       endif
 $     endif
+$     if f$locate("MAKE=",cparm) .lt. f$length(cparm)
+$     then
+$       start  = f$locate("=",cparm) + 1
+$       len    = f$length(cparm) - start
+$       mmks = f$extract(start,len,cparm)
+$       if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS")
+$       then
+$         make = mmks
+$       else
+$         write sys$output "Unsupported make choice ''mmks' ignored"
+$         write sys$output "Use MMK or MMS instead"
+$       endif
+$     endif
+$     if cparm .eqs. "HELP" then gosub bhelp
 $   endif
 $   i = i + 1
 $   goto opt_loop
@@ -244,6 +372,11 @@
 $!
 $! Look for the compiler used
 $!
+$! Version history
+$! 0.01 20040223 First version to receive a number
+$! 0.02 20040229 Save/set value of decc$no_rooted_search_lists
+$! 0.03 20060202 Extend handling of GNU C
+$! 0.04 20090402 Compaq -> hp
 $CHECK_COMPILER:
 $ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
 $ then
@@ -257,9 +390,26 @@
 $ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
 $ then goto CC_ERR
 $ else
-$   if its_decc then write sys$output "CC compiler check ... Compaq C"
-$   if its_vaxc then write sys$output "CC compiler check ... VAX C"
-$   if its_gnuc then write sys$output "CC compiler check ... GNU C"
+$   if its_decc
+$   then
+$     write sys$output "CC compiler check ... hp C"
+$     if f$trnlnm("decc$no_rooted_search_lists") .nes. ""
+$     then
+$       dnrsl = f$trnlnm("decc$no_rooted_search_lists")
+$     endif
+$     define/nolog decc$no_rooted_search_lists 1
+$   else
+$     if its_vaxc then write sys$output "CC compiler check ... VAX C"
+$     if its_gnuc
+$     then
+$         write sys$output "CC compiler check ... GNU C"
+$         if f$trnlnm(topt) then write topt "gnu_cc:[000000]gcclib.olb/lib"
+$         if f$trnlnm(optf) then write optf "gnu_cc:[000000]gcclib.olb/lib"
+$         cc = "gcc"
+$     endif
+$     if f$trnlnm(topt) then write topt "sys$share:vaxcrtl.exe/share"
+$     if f$trnlnm(optf) then write optf "sys$share:vaxcrtl.exe/share"
+$   endif
 $ endif
 $ return
 $!------------------------------------------------------------------------------
@@ -274,19 +424,19 @@
 $ deck
 # descrip.mms: MMS description file for building zlib on VMS
 # written by Martin P.J. Zinser
-# <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com>
+# <zinser@zinser.no-ip.info or martin.zinser@eurexchange.com>
 
-OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj, infback.obj\
+OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\
+       gzread.obj, gzwrite.obj, uncompr.obj, infback.obj\
        deflate.obj, trees.obj, zutil.obj, inflate.obj, \
        inftrees.obj, inffast.obj
 
 $ eod
 $ write out "CFLAGS=", ccopt
 $ write out "LOPTS=", lopts
+$ write out "all : example.exe minigzip.exe libz.olb"
 $ copy sys$input: out
 $ deck
-
-all : example.exe minigzip.exe libz.olb
         @ write sys$output " Example applications available"
 
 libz.olb : libz.olb($(OBJS))
@@ -296,7 +446,7 @@
               link $(LOPTS) example,libz.olb/lib
 
 minigzip.exe : minigzip.obj libz.olb
-              link $(LOPTS) minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
+              link $(LOPTS) minigzip,libz.olb/lib
 
 clean :
 	delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
@@ -307,12 +457,15 @@
 compress.obj : compress.c zlib.h zconf.h
 crc32.obj    : crc32.c zutil.h zlib.h zconf.h
 deflate.obj  : deflate.c deflate.h zutil.h zlib.h zconf.h
-example.obj  : example.c zlib.h zconf.h
-gzio.obj     : gzio.c zutil.h zlib.h zconf.h
+example.obj  : [.test]example.c zlib.h zconf.h
+gzclose.obj  : gzclose.c zutil.h zlib.h zconf.h
+gzlib.obj    : gzlib.c zutil.h zlib.h zconf.h
+gzread.obj   : gzread.c zutil.h zlib.h zconf.h
+gzwrite.obj  : gzwrite.c zutil.h zlib.h zconf.h
 inffast.obj  : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
 inflate.obj  : inflate.c zutil.h zlib.h zconf.h
 inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
-minigzip.obj : minigzip.c zlib.h zconf.h
+minigzip.obj : [.test]minigzip.c zlib.h zconf.h
 trees.obj    : trees.c deflate.h zutil.h zlib.h zconf.h
 uncompr.obj  : uncompr.c zlib.h zconf.h
 zutil.obj    : zutil.c zutil.h zlib.h zconf.h
@@ -328,13 +481,18 @@
 $CREA_OLIST:
 $ open/read min makefile.in
 $ open/write mod modules.opt
-$ src_check = "OBJS ="
+$ src_check_list = "OBJZ =#OBJG ="
 $MRLOOP:
 $ read/end=mrdone min rec
-$ if (f$extract(0,6,rec) .nes. src_check) then goto mrloop
+$ i = 0
+$SRC_CHECK_LOOP:
+$ src_check = f$element(i, "#", src_check_list)
+$ i = i+1
+$ if src_check .eqs. "#" then goto mrloop
+$ if (f$extract(0,6,rec) .nes. src_check) then goto src_check_loop
 $ rec = rec - src_check
 $ gosub extra_filnam
-$ if (f$element(1,"\",rec) .eqs. "\") then goto mrdone
+$ if (f$element(1,"\",rec) .eqs. "\") then goto mrloop
 $MRSLOOP:
 $ read/end=mrdone min rec
 $ gosub extra_filnam
@@ -382,80 +540,328 @@
 $ return
 $!------------------------------------------------------------------------------
 $!
-$! Analyze Object files for OpenVMS AXP to extract Procedure and Data
-$! information to build a symbol vector for a shareable image
-$! All the "brains" of this logic was suggested by Hartmut Becker
-$! (Hartmut.Becker@compaq.com). All the bugs were introduced by me
-$! (zinser@decus.de), so if you do have problem reports please do not
-$! bother Hartmut/HP, but get in touch with me
+$CHECK_CONFIG:
+$!
+$ in_ldef = f$locate(cdef,libdefs)
+$ if (in_ldef .lt. f$length(libdefs))
+$ then
+$   write aconf "#define ''cdef' 1"
+$   libdefs = f$extract(0,in_ldef,libdefs) + -
+              f$extract(in_ldef + f$length(cdef) + 1, -
+                        f$length(libdefs) - in_ldef - f$length(cdef) - 1, -
+                        libdefs)
+$ else
+$   if (f$type('cdef') .eqs. "INTEGER")
+$   then
+$     write aconf "#define ''cdef' ", 'cdef'
+$   else
+$     if (f$type('cdef') .eqs. "STRING")
+$     then
+$       write aconf "#define ''cdef' ", """", '''cdef'', """"
+$     else
+$       gosub check_cc_def
+$     endif
+$   endif
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Check if this is a define relating to the properties of the C/C++
+$! compiler
+$!
+$ CHECK_CC_DEF:
+$ if (cdef .eqs. "_LARGEFILE64_SOURCE")
+$ then
+$   copy sys$input: 'tc'
+$   deck
+#include "tconfig"
+#define _LARGEFILE
+#include <stdio.h>
+
+int main(){
+FILE *fp;
+  fp = fopen("temp.txt","r");
+  fseeko(fp,1,SEEK_SET);
+  fclose(fp);
+}
+
+$   eod
+$   test_inv = false
+$   comm_h = false
+$   gosub cc_prop_check
+$   return
+$ endif
+$ write aconf "/* ", line, " */"
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Check for properties of C/C++ compiler
 $!
-$ ANAL_OBJ_AXP: Subroutine
-$ V = 'F$Verify(0)
+$! Version history
+$! 0.01 20031020 First version to receive a number
+$! 0.02 20031022 Added logic for defines with value
+$! 0.03 20040309 Make sure local config file gets not deleted
+$! 0.04 20041230 Also write include for configure run
+$! 0.05 20050103 Add processing of "comment defines"
+$CC_PROP_CHECK:
+$ cc_prop = true
+$ is_need = false
+$ is_need = (f$extract(0,4,cdef) .eqs. "NEED") .or. (test_inv .eq. true)
+$ if f$search(th) .eqs. "" then create 'th'
+$ set message/nofac/noident/nosever/notext
+$ on error then continue
+$ cc 'tmpnam'
+$ if .not. ($status)  then cc_prop = false
+$ on error then continue
+$! The headers might lie about the capabilities of the RTL
+$ link 'tmpnam',tmp.opt/opt
+$ if .not. ($status)  then cc_prop = false
+$ set message/fac/ident/sever/text
+$ on error then goto err_exit
+$ delete/nolog 'tmpnam'.*;*/exclude='th'
+$ if (cc_prop .and. .not. is_need) .or. -
+     (.not. cc_prop .and. is_need)
+$ then
+$   write sys$output "Checking for ''cdef'... yes"
+$   if f$type('cdef_val'_yes) .nes. ""
+$   then
+$     if f$type('cdef_val'_yes) .eqs. "INTEGER" -
+         then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_yes)
+$     if f$type('cdef_val'_yes) .eqs. "STRING" -
+         then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_yes)
+$   else
+$     call write_config f$fao("#define !AS 1",cdef)
+$   endif
+$   if (cdef .eqs. "HAVE_FSEEKO") .or. (cdef .eqs. "_LARGE_FILES") .or. -
+       (cdef .eqs. "_LARGEFILE64_SOURCE") then -
+      call write_config f$string("#define _LARGEFILE 1")
+$ else
+$   write sys$output "Checking for ''cdef'... no"
+$   if (comm_h)
+$   then
+      call write_config f$fao("/* !AS */",line)
+$   else
+$     if f$type('cdef_val'_no) .nes. ""
+$     then
+$       if f$type('cdef_val'_no) .eqs. "INTEGER" -
+           then call write_config f$fao("#define !AS !UL",cdef,'cdef_val'_no)
+$       if f$type('cdef_val'_no) .eqs. "STRING" -
+           then call write_config f$fao("#define !AS !AS",cdef,'cdef_val'_no)
+$     else
+$       call write_config f$fao("#undef !AS",cdef)
+$     endif
+$   endif
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Check for properties of C/C++ compiler with multiple result values
+$!
+$! Version history
+$! 0.01 20040127 First version
+$! 0.02 20050103 Reconcile changes from cc_prop up to version 0.05
+$CC_MPROP_CHECK:
+$ cc_prop = true
+$ i    = 1
+$ idel = 1
+$ MT_LOOP:
+$ if f$type(result_'i') .eqs. "STRING"
+$ then
+$   set message/nofac/noident/nosever/notext
+$   on error then continue
+$   cc 'tmpnam'_'i'
+$   if .not. ($status)  then cc_prop = false
+$   on error then continue
+$! The headers might lie about the capabilities of the RTL
+$   link 'tmpnam'_'i',tmp.opt/opt
+$   if .not. ($status)  then cc_prop = false
+$   set message/fac/ident/sever/text
+$   on error then goto err_exit
+$   delete/nolog 'tmpnam'_'i'.*;*
+$   if (cc_prop)
+$   then
+$     write sys$output "Checking for ''cdef'... ", mdef_'i'
+$     if f$type(mdef_'i') .eqs. "INTEGER" -
+         then call write_config f$fao("#define !AS !UL",cdef,mdef_'i')
+$     if f$type('cdef_val'_yes) .eqs. "STRING" -
+         then call write_config f$fao("#define !AS !AS",cdef,mdef_'i')
+$     goto msym_clean
+$   else
+$     i = i + 1
+$     goto mt_loop
+$   endif
+$ endif
+$ write sys$output "Checking for ''cdef'... no"
+$ call write_config f$fao("#undef !AS",cdef)
+$ MSYM_CLEAN:
+$ if (idel .le. msym_max)
+$ then
+$   delete/sym mdef_'idel'
+$   idel = idel + 1
+$   goto msym_clean
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Write configuration to both permanent and temporary config file
+$!
+$! Version history
+$! 0.01 20031029 First version to receive a number
+$!
+$WRITE_CONFIG: SUBROUTINE
+$  write aconf 'p1'
+$  open/append confh 'th'
+$  write confh 'p1'
+$  close confh
+$ENDSUBROUTINE
+$!------------------------------------------------------------------------------
+$!
+$! Analyze the project map file and create the symbol vector for a shareable
+$! image from it
+$!
+$! Version history
+$! 0.01 20120128 First version
+$! 0.02 20120226 Add pre-load logic
+$!
+$ MAP_2_SHOPT: Subroutine
+$!
 $ SAY := "WRITE_ SYS$OUTPUT"
-$
+$!
 $ IF F$SEARCH("''P1'") .EQS. ""
 $ THEN
-$    SAY "ANAL_OBJ_AXP-E-NOSUCHFILE:  Error, inputfile ''p1' not available"
-$    goto exit_aa
+$    SAY "MAP_2_SHOPT-E-NOSUCHFILE:  Error, inputfile ''p1' not available"
+$    goto exit_m2s
 $ ENDIF
 $ IF "''P2'" .EQS. ""
 $ THEN
-$    SAY "ANAL_OBJ_AXP:  Error, no output file provided"
-$    goto exit_aa
+$    SAY "MAP_2_SHOPT:  Error, no output file provided"
+$    goto exit_m2s
 $ ENDIF
-$
-$ open/read in 'p1
-$ create a.tmp
-$ open/append atmp a.tmp
-$ loop:
-$ read/end=end_loop in line
-$ f= f$search(line)
-$ if f .eqs. ""
+$!
+$ module1 = "deflate#deflateEnd#deflateInit_#deflateParams#deflateSetDictionary"
+$ module2 = "gzclose#gzerror#gzgetc#gzgets#gzopen#gzprintf#gzputc#gzputs#gzread"
+$ module3 = "gzseek#gztell#inflate#inflateEnd#inflateInit_#inflateSetDictionary"
+$ module4 = "inflateSync#uncompress#zlibVersion#compress"
+$ open/read map 'p1
+$ if axp .or. ia64
 $ then
-$	write sys$output "ANAL_OBJ_AXP-w-nosuchfile, ''line'"
-$	goto loop
+$     open/write aopt a.opt
+$     open/write bopt b.opt
+$     write aopt " CASE_SENSITIVE=YES"
+$     write bopt "SYMBOL_VECTOR= (-"
+$     mod_sym_num = 1
+$ MOD_SYM_LOOP:
+$     if f$type(module'mod_sym_num') .nes. ""
+$     then
+$         mod_in = 0
+$ MOD_SYM_IN:
+$         shared_proc = f$element(mod_in, "#", module'mod_sym_num')
+$         if shared_proc .nes. "#"
+$         then
+$             write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
+        		       f$edit(shared_proc,"upcase"),shared_proc)
+$             write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
+$             mod_in = mod_in + 1
+$             goto mod_sym_in
+$         endif
+$         mod_sym_num = mod_sym_num + 1
+$         goto mod_sym_loop
+$     endif
+$MAP_LOOP:
+$     read/end=map_end map line
+$     if (f$locate("{",line).lt. f$length(line)) .or. -
+         (f$locate("global:", line) .lt. f$length(line))
+$     then
+$         proc = true
+$         goto map_loop
+$     endif
+$     if f$locate("}",line).lt. f$length(line) then proc = false
+$     if f$locate("local:", line) .lt. f$length(line) then proc = false
+$     if proc
+$     then
+$         shared_proc = f$edit(line,"collapse")
+$         chop_semi = f$locate(";", shared_proc)
+$         if chop_semi .lt. f$length(shared_proc) then -
+              shared_proc = f$extract(0, chop_semi, shared_proc)
+$         write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
+        			 f$edit(shared_proc,"upcase"),shared_proc)
+$         write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
+$     endif
+$     goto map_loop
+$MAP_END:
+$     close/nolog aopt
+$     close/nolog bopt
+$     open/append libopt 'p2'
+$     open/read aopt a.opt
+$     open/read bopt b.opt
+$ALOOP:
+$     read/end=aloop_end aopt line
+$     write libopt line
+$     goto aloop
+$ALOOP_END:
+$     close/nolog aopt
+$     sv = ""
+$BLOOP:
+$     read/end=bloop_end bopt svn
+$     if (svn.nes."")
+$     then
+$        if (sv.nes."") then write libopt sv
+$        sv = svn
+$     endif
+$     goto bloop
+$BLOOP_END:
+$     write libopt f$extract(0,f$length(sv)-2,sv), "-"
+$     write libopt ")"
+$     close/nolog bopt
+$     delete/nolog/noconf a.opt;*,b.opt;*
+$ else
+$     if vax
+$     then
+$     open/append libopt 'p2'
+$     mod_sym_num = 1
+$ VMOD_SYM_LOOP:
+$     if f$type(module'mod_sym_num') .nes. ""
+$     then
+$         mod_in = 0
+$ VMOD_SYM_IN:
+$         shared_proc = f$element(mod_in, "#", module'mod_sym_num')
+$         if shared_proc .nes. "#"
+$         then
+$     	      write libopt f$fao("UNIVERSAL=!AS",-
+      	  			     f$edit(shared_proc,"upcase"))
+$             mod_in = mod_in + 1
+$             goto vmod_sym_in
+$         endif
+$         mod_sym_num = mod_sym_num + 1
+$         goto vmod_sym_loop
+$     endif
+$VMAP_LOOP:
+$     	  read/end=vmap_end map line
+$     	  if (f$locate("{",line).lt. f$length(line)) .or. -
+   	      (f$locate("global:", line) .lt. f$length(line))
+$     	  then
+$     	      proc = true
+$     	      goto vmap_loop
+$     	  endif
+$     	  if f$locate("}",line).lt. f$length(line) then proc = false
+$     	  if f$locate("local:", line) .lt. f$length(line) then proc = false
+$     	  if proc
+$     	  then
+$     	      shared_proc = f$edit(line,"collapse")
+$     	      chop_semi = f$locate(";", shared_proc)
+$     	      if chop_semi .lt. f$length(shared_proc) then -
+      	  	  shared_proc = f$extract(0, chop_semi, shared_proc)
+$     	      write libopt f$fao("UNIVERSAL=!AS",-
+      	  			     f$edit(shared_proc,"upcase"))
+$     	  endif
+$     	  goto vmap_loop
+$VMAP_END:
+$     else
+$         write sys$output "Unknown Architecture (Not VAX, AXP, or IA64)"
+$         write sys$output "No options file created"
+$     endif
 $ endif
-$ define/user sys$output nl:
-$ define/user sys$error nl:
-$ anal/obj/gsd 'f /out=x.tmp
-$ open/read xtmp x.tmp
-$ XLOOP:
-$ read/end=end_xloop xtmp xline
-$ xline = f$edit(xline,"compress")
-$ write atmp xline
-$ goto xloop
-$ END_XLOOP:
-$ close xtmp
-$ goto loop
-$ end_loop:
-$ close in
-$ close atmp
-$ if f$search("a.tmp") .eqs. "" -
-	then $ exit
-$ ! all global definitions
-$ search a.tmp "symbol:","EGSY$V_DEF 1","EGSY$V_NORM 1"/out=b.tmp
-$ ! all procedures
-$ search b.tmp "EGSY$V_NORM 1"/wind=(0,1) /out=c.tmp
-$ search c.tmp "symbol:"/out=d.tmp
-$ define/user sys$output nl:
-$ edito/edt/command=sys$input d.tmp
-sub/symbol: "/symbol_vector=(/whole
-sub/"/=PROCEDURE)/whole
-exit
-$ ! all data
-$ search b.tmp "EGSY$V_DEF 1"/wind=(0,1) /out=e.tmp
-$ search e.tmp "symbol:"/out=f.tmp
-$ define/user sys$output nl:
-$ edito/edt/command=sys$input f.tmp
-sub/symbol: "/symbol_vector=(/whole
-sub/"/=DATA)/whole
-exit
-$ sort/nodupl d.tmp,f.tmp 'p2'
-$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;*
-$ if f$search("x.tmp") .nes. "" -
-	then $ delete x.tmp;*
-$!
-$ EXIT_AA:
-$ if V then set verify
+$ EXIT_M2S:
+$ close/nolog map
+$ close/nolog libopt
 $ endsubroutine
-$!------------------------------------------------------------------------------