--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gcc/expmed.h	Sun Aug 21 07:07:55 2011 +0900
@@ -0,0 +1,200 @@
+/* Target-dependent costs for expmed.c.
+   Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+   1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+   Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 3, or (at your option; any later
+version.
+
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3.  If not see
+<http://www.gnu.org/licenses/>.  */
+
+#ifndef EXPMED_H
+#define EXPMED_H 1
+
+enum alg_code {
+  alg_unknown,
+  alg_zero,
+  alg_m, alg_shift,
+  alg_add_t_m2,
+  alg_sub_t_m2,
+  alg_add_factor,
+  alg_sub_factor,
+  alg_add_t2_m,
+  alg_sub_t2_m,
+  alg_impossible
+};
+
+/* This structure holds the "cost" of a multiply sequence.  The
+   "cost" field holds the total rtx_cost of every operator in the
+   synthetic multiplication sequence, hence cost(a op b) is defined
+   as rtx_cost(op) + cost(a) + cost(b), where cost(leaf) is zero.
+   The "latency" field holds the minimum possible latency of the
+   synthetic multiply, on a hypothetical infinitely parallel CPU.
+   This is the critical path, or the maximum height, of the expression
+   tree which is the sum of rtx_costs on the most expensive path from
+   any leaf to the root.  Hence latency(a op b) is defined as zero for
+   leaves and rtx_cost(op) + max(latency(a), latency(b)) otherwise.  */
+
+struct mult_cost {
+  short cost;     /* Total rtx_cost of the multiplication sequence.  */
+  short latency;  /* The latency of the multiplication sequence.  */
+};
+
+/* This macro is used to compare a pointer to a mult_cost against an
+   single integer "rtx_cost" value.  This is equivalent to the macro
+   CHEAPER_MULT_COST(X,Z) where Z = {Y,Y}.  */
+#define MULT_COST_LESS(X,Y) ((X)->cost < (Y)	\
+			     || ((X)->cost == (Y) && (X)->latency < (Y)))
+
+/* This macro is used to compare two pointers to mult_costs against
+   each other.  The macro returns true if X is cheaper than Y.
+   Currently, the cheaper of two mult_costs is the one with the
+   lower "cost".  If "cost"s are tied, the lower latency is cheaper.  */
+#define CHEAPER_MULT_COST(X,Y)  ((X)->cost < (Y)->cost		\
+				 || ((X)->cost == (Y)->cost	\
+				     && (X)->latency < (Y)->latency))
+
+/* This structure records a sequence of operations.
+   `ops' is the number of operations recorded.
+   `cost' is their total cost.
+   The operations are stored in `op' and the corresponding
+   logarithms of the integer coefficients in `log'.
+
+   These are the operations:
+   alg_zero		total := 0;
+   alg_m		total := multiplicand;
+   alg_shift		total := total * coeff
+   alg_add_t_m2		total := total + multiplicand * coeff;
+   alg_sub_t_m2		total := total - multiplicand * coeff;
+   alg_add_factor	total := total * coeff + total;
+   alg_sub_factor	total := total * coeff - total;
+   alg_add_t2_m		total := total * coeff + multiplicand;
+   alg_sub_t2_m		total := total * coeff - multiplicand;
+
+   The first operand must be either alg_zero or alg_m.  */
+
+struct algorithm
+{
+  struct mult_cost cost;
+  short ops;
+  /* The size of the OP and LOG fields are not directly related to the
+     word size, but the worst-case algorithms will be if we have few
+     consecutive ones or zeros, i.e., a multiplicand like 10101010101...
+     In that case we will generate shift-by-2, add, shift-by-2, add,...,
+     in total wordsize operations.  */
+  enum alg_code op[MAX_BITS_PER_WORD];
+  char log[MAX_BITS_PER_WORD];
+};
+
+/* The entry for our multiplication cache/hash table.  */
+struct alg_hash_entry {
+  /* The number we are multiplying by.  */
+  unsigned HOST_WIDE_INT t;
+
+  /* The mode in which we are multiplying something by T.  */
+  enum machine_mode mode;
+
+  /* The best multiplication algorithm for t.  */
+  enum alg_code alg;
+
+  /* The cost of multiplication if ALG_CODE is not alg_impossible.
+     Otherwise, the cost within which multiplication by T is
+     impossible.  */
+  struct mult_cost cost;
+
+  /* Optimized for speed? */
+  bool speed;
+};
+
+/* The number of cache/hash entries.  */
+#if HOST_BITS_PER_WIDE_INT == 64
+#define NUM_ALG_HASH_ENTRIES 1031
+#else
+#define NUM_ALG_HASH_ENTRIES 307
+#endif
+
+/* Target-dependent globals.  */
+struct target_expmed {
+  /* Each entry of ALG_HASH caches alg_code for some integer.  This is
+     actually a hash table.  If we have a collision, that the older
+     entry is kicked out.  */
+  struct alg_hash_entry x_alg_hash[NUM_ALG_HASH_ENTRIES];
+
+  /* True if x_alg_hash might already have been used.  */
+  bool x_alg_hash_used_p;
+
+  /* Nonzero means divides or modulus operations are relatively cheap for
+     powers of two, so don't use branches; emit the operation instead.
+     Usually, this will mean that the MD file will emit non-branch
+     sequences.  */
+  bool x_sdiv_pow2_cheap[2][NUM_MACHINE_MODES];
+  bool x_smod_pow2_cheap[2][NUM_MACHINE_MODES];
+
+  /* Cost of various pieces of RTL.  Note that some of these are indexed by
+     shift count and some by mode.  */
+  int x_zero_cost[2];
+  int x_add_cost[2][NUM_MACHINE_MODES];
+  int x_neg_cost[2][NUM_MACHINE_MODES];
+  int x_shift_cost[2][NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
+  int x_shiftadd_cost[2][NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
+  int x_shiftsub0_cost[2][NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
+  int x_shiftsub1_cost[2][NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
+  int x_mul_cost[2][NUM_MACHINE_MODES];
+  int x_sdiv_cost[2][NUM_MACHINE_MODES];
+  int x_udiv_cost[2][NUM_MACHINE_MODES];
+  int x_mul_widen_cost[2][NUM_MACHINE_MODES];
+  int x_mul_highpart_cost[2][NUM_MACHINE_MODES];
+};
+
+extern struct target_expmed default_target_expmed;
+#if SWITCHABLE_TARGET
+extern struct target_expmed *this_target_expmed;
+#else
+#define this_target_expmed (&default_target_expmed)
+#endif
+
+#define alg_hash \
+  (this_target_expmed->x_alg_hash)
+#define alg_hash_used_p \
+  (this_target_expmed->x_alg_hash_used_p)
+#define sdiv_pow2_cheap \
+  (this_target_expmed->x_sdiv_pow2_cheap)
+#define smod_pow2_cheap \
+  (this_target_expmed->x_smod_pow2_cheap)
+#define zero_cost \
+  (this_target_expmed->x_zero_cost)
+#define add_cost \
+  (this_target_expmed->x_add_cost)
+#define neg_cost \
+  (this_target_expmed->x_neg_cost)
+#define shift_cost \
+  (this_target_expmed->x_shift_cost)
+#define shiftadd_cost \
+  (this_target_expmed->x_shiftadd_cost)
+#define shiftsub0_cost \
+  (this_target_expmed->x_shiftsub0_cost)
+#define shiftsub1_cost \
+  (this_target_expmed->x_shiftsub1_cost)
+#define mul_cost \
+  (this_target_expmed->x_mul_cost)
+#define sdiv_cost \
+  (this_target_expmed->x_sdiv_cost)
+#define udiv_cost \
+  (this_target_expmed->x_udiv_cost)
+#define mul_widen_cost \
+  (this_target_expmed->x_mul_widen_cost)
+#define mul_highpart_cost \
+  (this_target_expmed->x_mul_highpart_cost)
+
+#endif