# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@


VPATH = @srcdir@
am__make_dryrun = \
  { \
    am__dry=no; \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
      *) \
        for am__flg in $$MAKEFLAGS; do \
          case $$am__flg in \
            *=*|--*) ;; \
            *n*) am__dry=yes; break;; \
          esac; \
        done;; \
    esac; \
    test $$am__dry = yes; \
  }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = $(top_srcdir)/fragment.am $(srcdir)/Makefile.in \
	$(srcdir)/Makefile.am $(bits_HEADERS) $(std_HEADERS)
subdir = libsupc++
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
	$(top_srcdir)/../config/enable.m4 \
	$(top_srcdir)/../config/futex.m4 \
	$(top_srcdir)/../config/hwcaps.m4 \
	$(top_srcdir)/../config/iconv.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/lib-ld.m4 \
	$(top_srcdir)/../config/lib-link.m4 \
	$(top_srcdir)/../config/lib-prefix.m4 \
	$(top_srcdir)/../config/lthostflags.m4 \
	$(top_srcdir)/../config/multi.m4 \
	$(top_srcdir)/../config/no-executables.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/stdint.m4 \
	$(top_srcdir)/../config/unwind_ipinfo.m4 \
	$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
	$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
	$(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \
	$(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/../config/gc++filt.m4 \
	$(top_srcdir)/../config/tls.m4 $(top_srcdir)/../config/gthr.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(bitsdir)" \
	"$(DESTDIR)$(stddir)"
LTLIBRARIES = $(noinst_LTLIBRARIES) $(toolexeclib_LTLIBRARIES)
libsupc___la_LIBADD =
am__objects_1 = array_type_info.lo atexit_arm.lo atexit_thread.lo \
	bad_alloc.lo bad_array_length.lo bad_array_new.lo bad_cast.lo \
	bad_typeid.lo class_type_info.lo del_op.lo del_ops.lo \
	del_opnt.lo del_opv.lo del_opvs.lo del_opvnt.lo dyncast.lo \
	eh_alloc.lo eh_arm.lo eh_aux_runtime.lo eh_call.lo eh_catch.lo \
	eh_exception.lo eh_globals.lo eh_personality.lo eh_ptr.lo \
	eh_term_handler.lo eh_terminate.lo eh_tm.lo eh_throw.lo \
	eh_type.lo eh_unex_handler.lo enum_type_info.lo \
	function_type_info.lo fundamental_type_info.lo guard.lo \
	guard_error.lo hash_bytes.lo nested_exception.lo \
	new_handler.lo new_op.lo new_opnt.lo new_opv.lo new_opvnt.lo \
	new_opa.lo new_opant.lo new_opva.lo new_opvant.lo del_opa.lo \
	del_opant.lo del_opsa.lo del_opva.lo del_opvant.lo \
	del_opvsa.lo pbase_type_info.lo pmem_type_info.lo \
	pointer_type_info.lo pure.lo si_class_type_info.lo tinfo.lo \
	tinfo2.lo vec.lo vmi_class_type_info.lo vterminate.lo
@GLIBCXX_HOSTED_TRUE@am__objects_2 = cp-demangle.lo
@ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_FALSE@am__objects_3 =  \
@ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_FALSE@	vtv_stubs.lo
am_libsupc___la_OBJECTS = $(am__objects_1) $(am__objects_2) \
	$(am__objects_3)
libsupc___la_OBJECTS = $(am_libsupc___la_OBJECTS)
libsupc__convenience_la_LIBADD =
am_libsupc__convenience_la_OBJECTS = $(am__objects_1) $(am__objects_2) \
	$(am__objects_3)
libsupc__convenience_la_OBJECTS =  \
	$(am_libsupc__convenience_la_OBJECTS)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
SOURCES = $(libsupc___la_SOURCES) $(libsupc__convenience_la_SOURCES)
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
HEADERS = $(bits_HEADERS) $(std_HEADERS)
ETAGS = etags
CTAGS = ctags
ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@
ACLOCAL = @ACLOCAL@
ALLOCATOR_H = @ALLOCATOR_H@
ALLOCATOR_NAME = @ALLOCATOR_NAME@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@
ATOMIC_FLAGS = @ATOMIC_FLAGS@
ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASIC_FILE_CC = @BASIC_FILE_CC@
BASIC_FILE_H = @BASIC_FILE_H@
CC = @CC@
CCODECVT_CC = @CCODECVT_CC@
CCOLLATE_CC = @CCOLLATE_CC@
CCTYPE_CC = @CCTYPE_CC@
CFLAGS = @CFLAGS@
CLOCALE_CC = @CLOCALE_CC@
CLOCALE_H = @CLOCALE_H@
CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@
CMESSAGES_CC = @CMESSAGES_CC@
CMESSAGES_H = @CMESSAGES_H@
CMONEY_CC = @CMONEY_CC@
CNUMERIC_CC = @CNUMERIC_CC@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@
CPU_OPT_BITS_RANDOM = @CPU_OPT_BITS_RANDOM@
CPU_OPT_EXT_RANDOM = @CPU_OPT_EXT_RANDOM@
CSTDIO_H = @CSTDIO_H@
CTIME_CC = @CTIME_CC@
CTIME_H = @CTIME_H@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXFILT = @CXXFILT@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
C_INCLUDE_DIR = @C_INCLUDE_DIR@
DBLATEX = @DBLATEX@
DEBUG_FLAGS = @DEBUG_FLAGS@
DEFS = @DEFS@
DOT = @DOT@
DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@
EXEEXT = @EXEEXT@
EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
FGREP = @FGREP@
GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@
GLIBCXX_LIBS = @GLIBCXX_LIBS@
GREP = @GREP@
HWCAP_CFLAGS = @HWCAP_CFLAGS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LONG_DOUBLE_COMPAT_FLAGS = @LONG_DOUBLE_COMPAT_FLAGS@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
OPT_LDFLAGS = @OPT_LDFLAGS@
OS_INC_SRCDIR = @OS_INC_SRCDIR@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PDFLATEX = @PDFLATEX@
RANLIB = @RANLIB@
SECTION_FLAGS = @SECTION_FLAGS@
SECTION_LDFLAGS = @SECTION_LDFLAGS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
SYMVER_FILE = @SYMVER_FILE@
TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
VTV_CXXFLAGS = @VTV_CXXFLAGS@
VTV_CXXLINKFLAGS = @VTV_CXXLINKFLAGS@
VTV_PCH_CXXFLAGS = @VTV_PCH_CXXFLAGS@
WARN_FLAGS = @WARN_FLAGS@
WERROR = @WERROR@
XMLLINT = @XMLLINT@
XSLTPROC = @XSLTPROC@
XSL_STYLE_DIR = @XSL_STYLE_DIR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
baseline_dir = @baseline_dir@
baseline_subdir_switch = @baseline_subdir_switch@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
check_msgfmt = @check_msgfmt@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
get_gcc_base_ver = @get_gcc_base_ver@
glibcxx_MOFILES = @glibcxx_MOFILES@
glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@
glibcxx_POFILES = @glibcxx_POFILES@
glibcxx_builddir = @glibcxx_builddir@
glibcxx_compiler_pic_flag = @glibcxx_compiler_pic_flag@
glibcxx_compiler_shared_flag = @glibcxx_compiler_shared_flag@
glibcxx_cxx98_abi = @glibcxx_cxx98_abi@
glibcxx_localedir = @glibcxx_localedir@
glibcxx_lt_pic_flag = @glibcxx_lt_pic_flag@
glibcxx_prefixdir = @glibcxx_prefixdir@
glibcxx_srcdir = @glibcxx_srcdir@
glibcxx_toolexecdir = @glibcxx_toolexecdir@
glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
gxx_include_dir = @gxx_include_dir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libtool_VERSION = @libtool_VERSION@
localedir = @localedir@
localstatedir = @localstatedir@
lt_host_flags = @lt_host_flags@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
port_specific_symbol_files = @port_specific_symbol_files@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
python_mod_dir = @python_mod_dir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
thread_header = @thread_header@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
toplevel_builddir = @toplevel_builddir@
toplevel_srcdir = @toplevel_srcdir@

# May be used by various substitution variables.
gcc_version := $(shell @get_gcc_base_ver@ $(top_srcdir)/../gcc/BASE-VER)
MAINT_CHARSET = latin1
mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
PWD_COMMAND = $${PWDCMD-pwd}
STAMP = echo timestamp >
toolexecdir = $(glibcxx_toolexecdir)
toolexeclibdir = $(glibcxx_toolexeclibdir)
@ENABLE_WERROR_FALSE@WERROR_FLAG = 
@ENABLE_WERROR_TRUE@WERROR_FLAG = $(WERROR)
@ENABLE_EXTERN_TEMPLATE_FALSE@XTEMPLATE_FLAGS = 
@ENABLE_EXTERN_TEMPLATE_TRUE@XTEMPLATE_FLAGS = -fno-implicit-templates

# These bits are all figured out from configure.  Look in acinclude.m4
# or configure.ac to see how they are set.  See GLIBCXX_EXPORT_FLAGS.
CONFIG_CXXFLAGS = \
	$(SECTION_FLAGS) $(HWCAP_CFLAGS) -frandom-seed=$@

WARN_CXXFLAGS = \
	$(WARN_FLAGS) $(WERROR_FLAG) -fdiagnostics-show-location=once 


# -I/-D flags to pass when compiling.
AM_CPPFLAGS = $(GLIBCXX_INCLUDES) $(CPPFLAGS)

# Need this library to both be part of libstdc++.a, and installed
# separately too.
# 1) separate libsupc++.la
toolexeclib_LTLIBRARIES = libsupc++.la

# 2) integrated libsupc++convenience.la that is to be a part of libstdc++.a
noinst_LTLIBRARIES = libsupc++convenience.la
std_HEADERS = \
	cxxabi.h exception initializer_list new typeinfo

bits_HEADERS = \
	atomic_lockfree_defines.h cxxabi_forced.h \
	exception_defines.h exception_ptr.h hash_bytes.h nested_exception.h exception.h cxxabi_init_exception.h

headers = $(std_HEADERS) $(bits_HEADERS)
@GLIBCXX_HOSTED_TRUE@c_sources = \
@GLIBCXX_HOSTED_TRUE@	cp-demangle.c

sources = \
	array_type_info.cc \
	atexit_arm.cc \
	atexit_thread.cc \
	bad_alloc.cc \
	bad_array_length.cc \
	bad_array_new.cc \
	bad_cast.cc \
	bad_typeid.cc \
	class_type_info.cc \
	del_op.cc \
	del_ops.cc \
	del_opnt.cc \
	del_opv.cc \
	del_opvs.cc \
	del_opvnt.cc \
	dyncast.cc \
	eh_alloc.cc \
	eh_arm.cc \
	eh_aux_runtime.cc \
	eh_call.cc \
	eh_catch.cc \
	eh_exception.cc \
	eh_globals.cc \
	eh_personality.cc \
	eh_ptr.cc \
	eh_term_handler.cc \
	eh_terminate.cc \
	eh_tm.cc \
	eh_throw.cc \
	eh_type.cc \
	eh_unex_handler.cc \
	enum_type_info.cc \
	function_type_info.cc \
	fundamental_type_info.cc \
	guard.cc \
	guard_error.cc \
	hash_bytes.cc \
	nested_exception.cc \
	new_handler.cc \
	new_op.cc \
	new_opnt.cc \
	new_opv.cc \
	new_opvnt.cc \
	new_opa.cc \
	new_opant.cc \
	new_opva.cc \
	new_opvant.cc \
	del_opa.cc \
	del_opant.cc \
	del_opsa.cc \
	del_opva.cc \
	del_opvant.cc \
	del_opvsa.cc \
	pbase_type_info.cc \
	pmem_type_info.cc \
	pointer_type_info.cc \
	pure.cc \
	si_class_type_info.cc \
	tinfo.cc \
	tinfo2.cc \
	vec.cc \
	vmi_class_type_info.cc \
	vterminate.cc

@ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_FALSE@vtv_sources = \
@ENABLE_VTABLE_VERIFY_TRUE@@VTV_CYGMIN_FALSE@	vtv_stubs.cc

libsupc___la_SOURCES = $(sources) $(c_sources) $(vtv_sources)
libsupc__convenience_la_SOURCES = $(sources) $(c_sources) $(vtv_sources)

# AM_CXXFLAGS needs to be in each subdirectory so that it can be
# modified in a per-library or per-sub-library way.  Need to manually
# set this option because CONFIG_CXXFLAGS has to be after
# OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden
# as the occasion call for it.
AM_CXXFLAGS = \
	$(glibcxx_lt_pic_flag) $(glibcxx_compiler_shared_flag) \
	$(XTEMPLATE_FLAGS) \
	$(WARN_CXXFLAGS) $(OPTIMIZE_CXXFLAGS)  $(CONFIG_CXXFLAGS)

AM_MAKEFLAGS = \
	"gxx_include_dir=$(gxx_include_dir)"


# Use special rules for pulling things out of libiberty.  These
# objects should be compiled with the "C" compiler, not the C++
# compiler, and also should not use the C++ includes.
C_INCLUDES = -I.. -I$(toplevel_srcdir)/libiberty -I$(toplevel_srcdir)/include
C_COMPILE = \
	$(CC) $(DEFS) $(C_INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)


# LTCOMPILE is copied from LTCXXCOMPILE below.
LTCOMPILE = $(LIBTOOL) --tag CC --tag disable-shared $(LIBTOOLFLAGS) --mode=compile \
	    $(CC) $(DEFS) $(C_INCLUDES) \
	    $(glibcxx_lt_pic_flag) $(glibcxx_compiler_shared_flag) \
	    $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)


# Libtool notes

# 1) In general, libtool expects an argument such as `--tag=CXX' when
# using the C++ compiler, because that will enable the settings
# detected when C++ support was being configured.  However, when no
# such flag is given in the command line, libtool attempts to figure
# it out by matching the compiler name in each configuration section
# against a prefix of the command line.  The problem is that, if the
# compiler name and its initial flags stored in the libtool
# configuration file don't match those in the command line, libtool
# can't decide which configuration to use, and it gives up.  The
# correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe
# CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to
# attempt to infer which configuration to use.
# 
# The second tag argument, `--tag disable-shared` means that libtool
# only compiles each source once, for static objects. In actuality,
# glibcxx_lt_pic_flag and glibcxx_compiler_shared_flag are added to
# the libtool command that is used create the object, which is
# suitable for shared libraries.  The `--tag disable-shared` must be
# placed after --tag CXX lest things CXX undo the affect of
# disable-shared.

# 2) Need to explicitly set LTCXXCOMPILE so that EXTRA_CXX_FLAGS is
# last. (That way, things like -O2 passed down from the toplevel can
# be overridden by --enable-debug.)
LTCXXCOMPILE = \
	$(LIBTOOL) --tag CXX --tag disable-shared \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CXX) $(TOPLEVEL_INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) $(EXTRA_CXX_FLAGS)

LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS))

# 3) We'd have a problem when building the shared libstdc++ object if
# the rules automake generates would be used.  We cannot allow g++ to
# be used since this would add -lstdc++ to the link line which of
# course is problematic at this point.  So, we get the top-level
# directory to configure libstdc++-v3 to use gcc as the C++
# compilation driver.
CXXLINK = \
	$(LIBTOOL) --tag CXX --tag disable-shared \
	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CXX) \
	$(OPT_LDFLAGS) $(SECTION_LDFLAGS) $(AM_CXXFLAGS) $(LTLDFLAGS) -o $@


# Install notes
# We have to have rules modified from the default to counteract SUN make
# prepending each of $(*_HEADERS) with VPATH below.
stddir = $(gxx_include_dir)
bitsdir = $(gxx_include_dir)/bits

# By adding these files here, automake will remove them for 'make clean'
CLEANFILES = stamp-*
all: all-am

.SUFFIXES:
.SUFFIXES: .c .cc .lo .o .obj
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps libsupc++/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign --ignore-deps libsupc++/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/fragment.am:

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

clean-noinstLTLIBRARIES:
	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
	@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
	list2=; for p in $$list; do \
	  if test -f $$p; then \
	    list2="$$list2 $$p"; \
	  else :; fi; \
	done; \
	test -z "$$list2" || { \
	  echo " $(MKDIR_P) '$(DESTDIR)$(toolexeclibdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)" || exit 1; \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \
	}

uninstall-toolexeclibLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \
	done

clean-toolexeclibLTLIBRARIES:
	-test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)
	@list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
libsupc++.la: $(libsupc___la_OBJECTS) $(libsupc___la_DEPENDENCIES) $(EXTRA_libsupc___la_DEPENDENCIES) 
	$(CXXLINK) -rpath $(toolexeclibdir) $(libsupc___la_OBJECTS) $(libsupc___la_LIBADD) $(LIBS)
libsupc++convenience.la: $(libsupc__convenience_la_OBJECTS) $(libsupc__convenience_la_DEPENDENCIES) $(EXTRA_libsupc__convenience_la_DEPENDENCIES) 
	$(CXXLINK)  $(libsupc__convenience_la_OBJECTS) $(libsupc__convenience_la_LIBADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

.c.o:
	$(COMPILE) -c $<

.c.obj:
	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
	$(LTCOMPILE) -c -o $@ $<

.cc.o:
	$(CXXCOMPILE) -c -o $@ $<

.cc.obj:
	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.cc.lo:
	$(LTCXXCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
check-am: all-am
check: check-am
all-am: Makefile $(LTLIBRARIES) $(HEADERS)
installdirs:
	for dir in "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(bitsdir)" "$(DESTDIR)$(stddir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
	clean-toolexeclibLTLIBRARIES mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-bitsHEADERS install-stdHEADERS

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am: install-toolexeclibLTLIBRARIES

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-bitsHEADERS uninstall-stdHEADERS \
	uninstall-toolexeclibLTLIBRARIES

.MAKE: install-am install-strip

.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
	clean-libtool clean-noinstLTLIBRARIES \
	clean-toolexeclibLTLIBRARIES ctags distclean distclean-compile \
	distclean-generic distclean-libtool distclean-tags dvi dvi-am \
	html html-am info info-am install install-am \
	install-bitsHEADERS install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-stdHEADERS install-strip \
	install-toolexeclibLTLIBRARIES installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
	uninstall-am uninstall-bitsHEADERS uninstall-stdHEADERS \
	uninstall-toolexeclibLTLIBRARIES


cp-demangle.c:
	rm -f $@
	$(LN_S) $(toplevel_srcdir)/libiberty/cp-demangle.c $@
cp-demangle.lo: cp-demangle.c
	$(LTCOMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $<
cp-demangle.o: cp-demangle.c
	$(C_COMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $<

# Use special rules for the C++17 sources so that the proper flags are passed.
new_opa.lo: new_opa.cc
	$(LTCXXCOMPILE) -std=gnu++1z -c $<
new_opant.lo: new_opant.cc
	$(LTCXXCOMPILE) -std=gnu++1z -c $<
new_opva.lo: new_opva.cc
	$(LTCXXCOMPILE) -std=gnu++1z -c $<
new_opvant.lo: new_opvant.cc
	$(LTCXXCOMPILE) -std=gnu++1z -c $<
del_opa.lo: del_opa.cc
	$(LTCXXCOMPILE) -std=gnu++1z -c $<
del_opant.lo: del_opant.cc
	$(LTCXXCOMPILE) -std=gnu++1z -c $<
del_opsa.lo: del_opsa.cc
	$(LTCXXCOMPILE) -std=gnu++1z -c $<
del_opva.lo: del_opva.cc
	$(LTCXXCOMPILE) -std=gnu++1z -c $<
del_opvant.lo: del_opvant.cc
	$(LTCXXCOMPILE) -std=gnu++1z -c $<
del_opvsa.lo: del_opvsa.cc
	$(LTCXXCOMPILE) -std=gnu++1z -c $<

install-stdHEADERS: $(std_HEADERS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(stddir)
	@list='$(std_HEADERS)'; for p in $$list; do \
	  q=`echo $$p | sed -e 's,.*/,,'`; \
	  if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(stddir)/$$q"; \
	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(stddir)/$$q; \
	done

install-bitsHEADERS: $(bits_HEADERS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(bitsdir)
	@list='$(bits_HEADERS)'; for p in $$list; do \
	  q=`echo $$p | sed -e 's,.*/,,'`; \
	  if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(bitsdir)/$$q"; \
	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(bitsdir)/$$q; \
	done

uninstall-stdHEADERS:
	@$(NORMAL_UNINSTALL)
	list='$(std_HEADERS)'; for p in $$list; do \
	  q=`echo $$p | sed -e 's,.*/,,'`; \
	  rm -f $(DESTDIR)$(stddir)/$$q; \
	done

uninstall-bitsHEADERS:
	@$(NORMAL_UNINSTALL)
	list='$(bits_HEADERS)'; for p in $$list; do \
	  q=`echo $$p | sed -e 's,.*/,,'`; \
	  rm -f $(DESTDIR)$(bitsdir)/$$q; \
	done

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: