/* GCC backend definitions for the Renesas RL78 processor.
   Copyright (C) 2011-2020 Free Software Foundation, Inc.
   Contributed by Red Hat.

   This file is part of GCC.

   GCC is free software; you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published
   by the Free Software Foundation; either version 3, or (at your
   option) any later version.

   GCC is distributed in the hope that it will be useful, but WITHOUT
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
   License for more details.

   You should have received a copy of the GNU General Public License
   along with GCC; see the file COPYING3.  If not see
   <http://www.gnu.org/licenses/>.  */


#define RL78_MUL_NONE	(rl78_mul_type == MUL_NONE)
#define RL78_MUL_G13	(rl78_mul_type == MUL_G13)
#define RL78_MUL_G14	(rl78_mul_type == MUL_G14)

#define TARGET_G10	(rl78_cpu_type == CPU_G10)
#define TARGET_G13	(rl78_cpu_type == CPU_G13)
#define TARGET_G14	(rl78_cpu_type == CPU_G14)

#define TARGET_CPU_CPP_BUILTINS()               \
  do                                            \
    {                                           \
      builtin_define ("__RL78__"); 		\
      builtin_assert ("cpu=RL78"); 		\
      						\
      if (RL78_MUL_NONE)			\
	builtin_define ("__RL78_MUL_NONE__"); 	\
      else if (RL78_MUL_G13)			\
	builtin_define ("__RL78_MUL_G13__"); 	\
      else if (RL78_MUL_G14)			\
	builtin_define ("__RL78_MUL_G14__"); 	\
      						\
      if (TARGET_G10)				\
	builtin_define ("__RL78_G10__"); 	\
      else if (TARGET_G13)			\
	builtin_define ("__RL78_G13__"); 	\
      else if (TARGET_G14)			\
	builtin_define ("__RL78_G14__"); 	\
    }                                           \
  while (0)

#undef  STARTFILE_SPEC
#define STARTFILE_SPEC "%{pg:gcrt0.o%s}%{!pg:crt0.o%s} crtbegin.o%s"

#undef  ENDFILE_SPEC
#define ENDFILE_SPEC "crtend.o%s crtn.o%s"

#undef  ASM_SPEC
#define ASM_SPEC "\
%{mrelax:-relax} \
%{mg10:--mg10} \
%{mg13:--mg13} \
%{mg14:--mg14} \
%{mrl78:--mg14} \
%{mcpu=g10:--mg10} \
%{mcpu=g13:--mg13} \
%{mcpu=g14:--mg14} \
%{mcpu=rl78:--mg14} \
"

#undef  LINK_SPEC
#define LINK_SPEC "\
%{mrelax:-relax} \
%{!r:--gc-sections} \
"

#undef  LIB_SPEC
#define LIB_SPEC "					\
--start-group						\
-lc							\
-lsim							\
%{fprofile-arcs|fprofile-generate|coverage:-lgcov} 	\
--end-group					   	\
%{!T*: %{msim:%Trl78-sim.ld}%{!msim:%Trl78.ld}}		\
"


#define BITS_BIG_ENDIAN 		0
#define BYTES_BIG_ENDIAN 		0
#define WORDS_BIG_ENDIAN 		0

#ifdef IN_LIBGCC2
/* This is to get correct SI and DI modes in libgcc2.c (32 and 64 bits).  */
#define	UNITS_PER_WORD			4
/* We have a problem with libgcc2.  It only defines two versions of
   each function, one for "int" and one for "long long".  Ie it assumes
   that "sizeof (int) == sizeof (long)".  For the RL78 this is not true
   and we need a third set of functions.  We explicitly define
   LIBGCC2_UNITS_PER_WORD here so that it is clear that we are expecting
   to get the SI and DI versions from the libgcc2.c sources, and we
   provide our own set of HI functions, which is why this
   definition is surrounded by #ifndef..#endif.  */
#ifndef LIBGCC2_UNITS_PER_WORD
#define LIBGCC2_UNITS_PER_WORD 		4
#endif
#else
/* Actual width of a word, in units (bytes).  */
#define	UNITS_PER_WORD 			1
#endif

#define SHORT_TYPE_SIZE			16
#define INT_TYPE_SIZE			16
#define LONG_TYPE_SIZE			32
#define LONG_LONG_TYPE_SIZE		64

#define FLOAT_TYPE_SIZE 		32
#define DOUBLE_TYPE_SIZE 		32 /*64*/
#define LONG_DOUBLE_TYPE_SIZE		64 /*DOUBLE_TYPE_SIZE*/

#define DEFAULT_SIGNED_CHAR		0

#define STRICT_ALIGNMENT 		1
#define FUNCTION_BOUNDARY 		8
#define BIGGEST_ALIGNMENT 		16
#define STACK_BOUNDARY 			16
#define PARM_BOUNDARY 			16

#define STACK_GROWS_DOWNWARD		1
#define FRAME_GROWS_DOWNWARD		1
#define FIRST_PARM_OFFSET(FNDECL) 	0

#define MAX_REGS_PER_ADDRESS 		1

#define Pmode 				HImode
#define POINTER_SIZE			16
#undef  SIZE_TYPE
#define SIZE_TYPE			"unsigned int"
#undef  PTRDIFF_TYPE
#define PTRDIFF_TYPE			"int"
#undef  WCHAR_TYPE
#define WCHAR_TYPE			"long int"
#undef  WCHAR_TYPE_SIZE
#define WCHAR_TYPE_SIZE			BITS_PER_WORD
#define POINTERS_EXTEND_UNSIGNED	1
#define FUNCTION_MODE 			HImode
#define CASE_VECTOR_MODE		Pmode
#define WORD_REGISTER_OPERATIONS	1
#define HAS_LONG_COND_BRANCH		0
#define HAS_LONG_UNCOND_BRANCH		0

#define MOVE_MAX 			2

#define ADDR_SPACE_NEAR			1
#define ADDR_SPACE_FAR			2

#define HAVE_PRE_DECCREMENT		0
#define HAVE_POST_INCREMENT		0

#define MOVE_RATIO(SPEED) 		((SPEED) ? 24 : 16)
#define SLOW_BYTE_ACCESS		0

#define STORE_FLAG_VALUE		1
#define LOAD_EXTEND_OP(MODE)		ZERO_EXTEND


/* The RL78 has four register banks.  Normal operation uses RB0 as
   real registers, RB1 and RB2 as "virtual" registers (because we know
   they'll be there, and not used as variables), and RB3 is reserved
   for interrupt handlers.  The virtual registers are accessed as
   SADDRs:

   FFEE0-FFEE7 RB0
   FFEE8-FFEEF RB1
   FFEF0-FFEF7 RB2
   FFEF8-FFEFF RB3
*/
#define REGISTER_NAMES						\
  {								\
    "x",   "a",   "c",   "b",   "e",   "d",   "l",   "h", 	\
    "r8",  "r9",  "r10", "r11", "r12", "r13", "r14", "r15",	\
    "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",	\
    "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",	\
    "sp",  "ap",  "psw", "es",  "cs"				\
  }

#define ADDITIONAL_REGISTER_NAMES	\
{					\
{ "ax", 0 }, \
{ "bc", 2 }, \
{ "de", 4 }, \
{ "hl", 6 }, \
{ "rp0", 0 }, \
{ "rp1", 2 }, \
{ "rp2", 4 }, \
{ "rp3", 6 }, \
{ "r0", 0 }, \
{ "r1", 1 }, \
{ "r2", 2 }, \
{ "r3", 3 }, \
{ "r4", 4 }, \
{ "r5", 5 }, \
{ "r6", 6 }, \
{ "r7", 7 }, \
}

enum reg_class
{
  NO_REGS,			/* No registers in set.  */
  XREG,
  AREG,
  AXREG,
  CREG,
  BREG,
  BCREG,
  EREG,
  DREG,
  DEREG,
  LREG,
  HREG,
  HLREG,
  IDX_REGS,
  QI_REGS,
  SPREG,
  R8W_REGS,
  R10W_REGS,
  INT_REGS,
  V_REGS,			/* Virtual registers.  */
  GR_REGS,			/* Integer registers.  */
  PSWREG,
  ALL_REGS,			/* All registers.  */
  LIM_REG_CLASSES		/* Max value + 1.  */
};

#define REG_CLASS_NAMES					\
{							\
  "NO_REGS",						\
  "XREG",						\
  "AREG",						\
  "AXREG",						\
  "CREG",						\
  "BREG",						\
  "BCREG",						\
  "EREG",						\
  "DREG",						\
  "DEREG",						\
  "LREG",						\
  "HREG",						\
  "HLREG",						\
  "IDX_REGS",						\
  "QI_REGS",						\
  "SPREG",						\
  "R8W_REGS",						\
  "R10W_REGS",						\
  "INT_REGS",						\
  "V_REGS",						\
  "GR_REGS",						\
  "PSWREG",						\
  "ALL_REGS"						\
}

/* Note that no class may include the second register in $fp, because
   we treat $fp as a single HImode register.  */
#define REG_CLASS_CONTENTS				\
{							\
  { 0x00000000, 0x00000000 },	/* No registers,  */		\
  { 0x00000001, 0x00000000 }, \
  { 0x00000002, 0x00000000 }, \
  { 0x00000003, 0x00000000 }, \
  { 0x00000004, 0x00000000 }, \
  { 0x00000008, 0x00000000 }, \
  { 0x0000000c, 0x00000000 }, \
  { 0x00000010, 0x00000000 }, \
  { 0x00000020, 0x00000000 }, \
  { 0x00000030, 0x00000000 }, \
  { 0x00000040, 0x00000000 }, \
  { 0x00000080, 0x00000000 }, \
  { 0x000000c0, 0x00000000 }, \
  { 0x0000000c, 0x00000000 },	/* B and C - index regs.  */	\
  { 0x000000ff, 0x00000000 },	/* all real registers.  */	\
  { 0x00000000, 0x00000001 }, 	/* SP */			\
  { 0x00000300, 0x00000000 }, 	/* R8 - HImode */		\
  { 0x00000c00, 0x00000000 }, 	/* R10 - HImode */		\
  { 0xff000000, 0x00000000 }, 	/* INT - HImode */		\
  { 0xff7fff00, 0x00000000 },	/* Virtual registers.  */	\
  { 0xff7fff00, 0x00000002 },	/* General registers.  */	\
  { 0x04000000, 0x00000004 },	/* PSW.  */	\
  { 0xff7fffff, 0x0000001f }	/* All registers.  */		\
}

#define TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P hook_bool_mode_true
#define N_REG_CLASSES			(int) LIM_REG_CLASSES
#define CLASS_MAX_NREGS(CLASS, MODE)    ((GET_MODE_SIZE (MODE) \
					  + UNITS_PER_WORD - 1) \
					 / UNITS_PER_WORD)

#define GENERAL_REGS			GR_REGS
#define BASE_REG_CLASS  		V_REGS
#define INDEX_REG_CLASS			V_REGS

#define FIRST_PSEUDO_REGISTER 		37

#define REGNO_REG_CLASS(REGNO)          ((REGNO) < FIRST_PSEUDO_REGISTER \
					 ? GR_REGS : NO_REGS)

#define FRAME_POINTER_REGNUM 		22
#define STACK_POINTER_REGNUM 	        32
#define ARG_POINTER_REGNUM 		33
#define CC_REGNUM                       34
#define FUNC_RETURN_REGNUM              8
#define STATIC_CHAIN_REGNUM 		14

/* Trampolines are implemented with a separate data stack.  The memory
   on stack only holds the function pointer for the chosen stub.
 */

#define TRAMPOLINE_SIZE			4
#define TRAMPOLINE_ALIGNMENT		16

#define ELIMINABLE_REGS					\
{{ ARG_POINTER_REGNUM,   STACK_POINTER_REGNUM },	\
 { ARG_POINTER_REGNUM,   FRAME_POINTER_REGNUM },	\
 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM }}

#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET)	\
  (OFFSET) = rl78_initial_elimination_offset ((FROM), (TO))


#define FUNCTION_ARG_REGNO_P(N)	  	0
#define FUNCTION_VALUE_REGNO_P(N) 	((N) == 8)
#define DEFAULT_PCC_STRUCT_RETURN	0

#define FIXED_REGISTERS					\
{							\
  1,1,1,1, 1,1,1,1,					\
  0,0,0,0, 0,0,0,0,					\
  0,0,0,0, 0,0,1,1,					\
  1,1,1,1, 1,1,1,1,					\
  0, 1, 0, 1, 1						\
}

#define CALL_USED_REGISTERS				\
{							\
  1,1,1,1, 1,1,1,1,					\
  1,1,1,1, 1,1,1,1,					\
  0,0,0,0, 0,0,1,1,					\
  1,1,1,1, 1,1,1,1,					\
  0, 1, 1, 1, 1						\
}

#define LIBCALL_VALUE(MODE)				\
  gen_rtx_REG ((MODE),					\
	       FUNC_RETURN_REGNUM)

/* Order of allocation of registers.  */

#define REG_ALLOC_ORDER					\
  { 8, 9, 10, 11, 12, 13, 14, 15,			\
    16, 17, 18, 19, 20, 21, 22, 23,			\
    0, 1, 6, 7, 2, 3, 4, 5,				\
    24, 25, 26, 27, 28, 29, 30, 31,			\
    32, 33, 34						\
}

#define REGNO_IN_RANGE(REGNO, MIN, MAX)			\
  (IN_RANGE ((REGNO), (MIN), (MAX)) 			\
   || (reg_renumber != NULL				\
       && reg_renumber[(REGNO)] >= (MIN)		\
       && reg_renumber[(REGNO)] <= (MAX)))

#ifdef REG_OK_STRICT
#define REGNO_OK_FOR_BASE_P(regno)      REGNO_IN_RANGE (regno, 16, 31)
#else
#define REGNO_OK_FOR_BASE_P(regno)	1
#endif

#define REGNO_OK_FOR_INDEX_P(regno)	REGNO_OK_FOR_BASE_P (regno)

#define REGNO_MODE_CODE_OK_FOR_BASE_P(regno, mode, address_space, outer_code, index_code) \
  rl78_regno_mode_code_ok_for_base_p (regno, mode, address_space, outer_code, index_code)

#define MODE_CODE_BASE_REG_CLASS(mode, address_space, outer_code, index_code) \
  rl78_mode_code_base_reg_class (mode, address_space, outer_code, index_code)

#define RETURN_ADDR_RTX(COUNT, FRAMEADDR)				\
  ((COUNT) == 0								\
   ? gen_rtx_MEM (Pmode, gen_rtx_PLUS (HImode, arg_pointer_rtx, GEN_INT (-4))) \
   : NULL_RTX)

#define INCOMING_RETURN_ADDR_RTX	gen_rtx_MEM (Pmode, stack_pointer_rtx)

#define ACCUMULATE_OUTGOING_ARGS	1

typedef unsigned int CUMULATIVE_ARGS;

#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \
  (CUM) = 0


/* FIXME */
#define NO_PROFILE_COUNTERS     1
#define PROFILE_BEFORE_PROLOGUE 1

#define FUNCTION_PROFILER(FILE, LABELNO)	\
    fprintf (FILE, "\tbsr\t__mcount\n");


#define TEXT_SECTION_ASM_OP ".text"
#define DATA_SECTION_ASM_OP ".data"
#define BSS_SECTION_ASM_OP ".bss"
#define CTORS_SECTION_ASM_OP ".section \".ctors\",\"a\""
#define DTORS_SECTION_ASM_OP ".section \".dtors\",\"a\""

#define ASM_COMMENT_START	" ;"
#define ASM_APP_ON		""
#define ASM_APP_OFF 		""
#define LOCAL_LABEL_PREFIX	".L"
#undef  USER_LABEL_PREFIX
#define USER_LABEL_PREFIX	"_"

#define GLOBAL_ASM_OP 		"\t.global\t"

#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
  fprintf (FILE, "\t.long .L%d\n", VALUE)

/* This is how to output an element of a case-vector that is relative.
   Note: The local label referenced by the "3b" below is emitted by
   the tablejump insn.  */

#define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
  fprintf (FILE, "\t.long .L%d - 1b\n", VALUE)


#define ASM_OUTPUT_SYMBOL_REF(FILE, SYM) rl78_output_symbol_ref ((FILE), (SYM))

#define ASM_OUTPUT_LABELREF(FILE, SYM) rl78_output_labelref ((FILE), (SYM))

#define ASM_OUTPUT_ALIGNED_DECL_COMMON(STREAM, DECL, NAME, SIZE, ALIGNMENT) \
	rl78_output_aligned_common (STREAM, DECL, NAME, SIZE, ALIGNMENT, 1)

#define ASM_OUTPUT_ALIGNED_DECL_LOCAL(STREAM, DECL, NAME, SIZE, ALIGNMENT) \
	rl78_output_aligned_common (STREAM, DECL, NAME, SIZE, ALIGNMENT, 0)

#define ASM_OUTPUT_ALIGN(STREAM, LOG)		\
  do						\
    {						\
      if ((LOG) == 0)				\
        break;					\
      fprintf (STREAM, "\t.balign %d\n", 1 << (LOG));	\
    }						\
  while (0)

/* For PIC put jump tables into the text section so that the offsets that
   they contain are always computed between two same-section symbols.  */
#define JUMP_TABLES_IN_TEXT_SECTION	(flag_pic)

/* This is a version of REG_P that also returns TRUE for SUBREGs.  */
#define RL78_REG_P(rtl) (REG_P (rtl) || GET_CODE (rtl) == SUBREG)

/* Like REG_P except that this macro is true for SET expressions.  */
#define SET_P(rtl)    (GET_CODE (rtl) == SET)

#undef  PREFERRED_DEBUGGING_TYPE
#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG

#undef	DWARF2_ADDR_SIZE
#define	DWARF2_ADDR_SIZE			4

#define DWARF2_ASM_LINE_DEBUG_INFO		1

#define EXIT_IGNORE_STACK			0
#define INCOMING_FRAME_SP_OFFSET		4


#define BRANCH_COST(SPEED,PREDICT)       1
#define REGISTER_MOVE_COST(MODE,FROM,TO) 2

#define EH_RETURN_DATA_REGNO(N) (N < 2 ? (8+(N)*2) : INVALID_REGNUM)
#define EH_RETURN_STACKADJ_RTX gen_rtx_REG (HImode, 20)

#define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) DW_EH_PE_udata4

/* NOTE: defined but zero means dwarf2 debugging, but sjlj EH.  */
#define DWARF2_UNWIND_INFO 0

#define REGISTER_TARGET_PRAGMAS() rl78_register_pragmas()