------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- S E M _ A G G R -- -- -- -- B o d y -- -- -- -- Copyright (C) 1992-2018, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING3. If not, go to -- -- http://www.gnu.org/licenses for a complete copy of the license. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ with Aspects; use Aspects; with Atree; use Atree; with Checks; use Checks; with Einfo; use Einfo; with Elists; use Elists; with Errout; use Errout; with Expander; use Expander; with Exp_Ch6; use Exp_Ch6; with Exp_Tss; use Exp_Tss; with Exp_Util; use Exp_Util; with Freeze; use Freeze; with Itypes; use Itypes; with Lib; use Lib; with Lib.Xref; use Lib.Xref; with Namet; use Namet; with Namet.Sp; use Namet.Sp; with Nmake; use Nmake; with Nlists; use Nlists; with Opt; use Opt; with Restrict; use Restrict; with Rident; use Rident; with Sem; use Sem; with Sem_Aux; use Sem_Aux; with Sem_Cat; use Sem_Cat; with Sem_Ch3; use Sem_Ch3; with Sem_Ch8; use Sem_Ch8; with Sem_Ch13; use Sem_Ch13; with Sem_Dim; use Sem_Dim; with Sem_Eval; use Sem_Eval; with Sem_Res; use Sem_Res; with Sem_Util; use Sem_Util; with Sem_Type; use Sem_Type; with Sem_Warn; use Sem_Warn; with Sinfo; use Sinfo; with Snames; use Snames; with Stringt; use Stringt; with Stand; use Stand; with Style; use Style; with Targparm; use Targparm; with Tbuild; use Tbuild; with Uintp; use Uintp; package body Sem_Aggr is type Case_Bounds is record Lo : Node_Id; -- Low bound of choice. Once we sort the Case_Table, then entries -- will be in order of ascending Choice_Lo values. Hi : Node_Id; -- High Bound of choice. The sort does not pay any attention to the -- high bound, so choices 1 .. 4 and 1 .. 5 could be in either order. Highest : Uint; -- If there are duplicates or missing entries, then in the sorted -- table, this records the highest value among Choice_Hi values -- seen so far, including this entry. Choice : Node_Id; -- The node of the choice end record; type Case_Table_Type is array (Nat range <>) of Case_Bounds; -- Table type used by Check_Case_Choices procedure. Entry zero is not -- used (reserved for the sort). Real entries start at one. ----------------------- -- Local Subprograms -- ----------------------- procedure Sort_Case_Table (Case_Table : in out Case_Table_Type); -- Sort the Case Table using the Lower Bound of each Choice as the key. A -- simple insertion sort is used since the choices in a case statement will -- usually be in near sorted order. procedure Check_Can_Never_Be_Null (Typ : Entity_Id; Expr : Node_Id); -- Ada 2005 (AI-231): Check bad usage of null for a component for which -- null exclusion (NOT NULL) is specified. Typ can be an E_Array_Type for -- the array case (the component type of the array will be used) or an -- E_Component/E_Discriminant entity in the record case, in which case the -- type of the component will be used for the test. If Typ is any other -- kind of entity, the call is ignored. Expr is the component node in the -- aggregate which is known to have a null value. A warning message will be -- issued if the component is null excluding. -- -- It would be better to pass the proper type for Typ ??? procedure Check_Expr_OK_In_Limited_Aggregate (Expr : Node_Id); -- Check that Expr is either not limited or else is one of the cases of -- expressions allowed for a limited component association (namely, an -- aggregate, function call, or <> notation). Report error for violations. -- Expression is also OK in an instance or inlining context, because we -- have already preanalyzed and it is known to be type correct. procedure Check_Qualified_Aggregate (Level : Nat; Expr : Node_Id); -- Given aggregate Expr, check that sub-aggregates of Expr that are nested -- at Level are qualified. If Level = 0, this applies to Expr directly. -- Only issue errors in formal verification mode. function Is_Top_Level_Aggregate (Expr : Node_Id) return Boolean; -- Return True of Expr is an aggregate not contained directly in another -- aggregate. ------------------------------------------------------ -- Subprograms used for RECORD AGGREGATE Processing -- ------------------------------------------------------ procedure Resolve_Record_Aggregate (N : Node_Id; Typ : Entity_Id); -- This procedure performs all the semantic checks required for record -- aggregates. Note that for aggregates analysis and resolution go -- hand in hand. Aggregate analysis has been delayed up to here and -- it is done while resolving the aggregate. -- -- N is the N_Aggregate node. -- Typ is the record type for the aggregate resolution -- -- While performing the semantic checks, this procedure builds a new -- Component_Association_List where each record field appears alone in a -- Component_Choice_List along with its corresponding expression. The -- record fields in the Component_Association_List appear in the same order -- in which they appear in the record type Typ. -- -- Once this new Component_Association_List is built and all the semantic -- checks performed, the original aggregate subtree is replaced with the -- new named record aggregate just built. Note that subtree substitution is -- performed with Rewrite so as to be able to retrieve the original -- aggregate. -- -- The aggregate subtree manipulation performed by Resolve_Record_Aggregate -- yields the aggregate format expected by Gigi. Typically, this kind of -- tree manipulations are done in the expander. However, because the -- semantic checks that need to be performed on record aggregates really go -- hand in hand with the record aggregate normalization, the aggregate -- subtree transformation is performed during resolution rather than -- expansion. Had we decided otherwise we would have had to duplicate most -- of the code in the expansion procedure Expand_Record_Aggregate. Note, -- however, that all the expansion concerning aggregates for tagged records -- is done in Expand_Record_Aggregate. -- -- The algorithm of Resolve_Record_Aggregate proceeds as follows: -- -- 1. Make sure that the record type against which the record aggregate -- has to be resolved is not abstract. Furthermore if the type is a -- null aggregate make sure the input aggregate N is also null. -- -- 2. Verify that the structure of the aggregate is that of a record -- aggregate. Specifically, look for component associations and ensure -- that each choice list only has identifiers or the N_Others_Choice -- node. Also make sure that if present, the N_Others_Choice occurs -- last and by itself. -- -- 3. If Typ contains discriminants, the values for each discriminant is -- looked for. If the record type Typ has variants, we check that the -- expressions corresponding to each discriminant ruling the (possibly -- nested) variant parts of Typ, are static. This allows us to determine -- the variant parts to which the rest of the aggregate must conform. -- The names of discriminants with their values are saved in a new -- association list, New_Assoc_List which is later augmented with the -- names and values of the remaining components in the record type. -- -- During this phase we also make sure that every discriminant is -- assigned exactly one value. Note that when several values for a given -- discriminant are found, semantic processing continues looking for -- further errors. In this case it's the first discriminant value found -- which we will be recorded. -- -- IMPORTANT NOTE: For derived tagged types this procedure expects -- First_Discriminant and Next_Discriminant to give the correct list -- of discriminants, in the correct order. -- -- 4. After all the discriminant values have been gathered, we can set the -- Etype of the record aggregate. If Typ contains no discriminants this -- is straightforward: the Etype of N is just Typ, otherwise a new -- implicit constrained subtype of Typ is built to be the Etype of N. -- -- 5. Gather the remaining record components according to the discriminant -- values. This involves recursively traversing the record type -- structure to see what variants are selected by the given discriminant -- values. This processing is a little more convoluted if Typ is a -- derived tagged types since we need to retrieve the record structure -- of all the ancestors of Typ. -- -- 6. After gathering the record components we look for their values in the -- record aggregate and emit appropriate error messages should we not -- find such values or should they be duplicated. -- -- 7. We then make sure no illegal component names appear in the record -- aggregate and make sure that the type of the record components -- appearing in a same choice list is the same. Finally we ensure that -- the others choice, if present, is used to provide the value of at -- least a record component. -- -- 8. The original aggregate node is replaced with the new named aggregate -- built in steps 3 through 6, as explained earlier. -- -- Given the complexity of record aggregate resolution, the primary goal of -- this routine is clarity and simplicity rather than execution and storage -- efficiency. If there are only positional components in the aggregate the -- running time is linear. If there are associations the running time is -- still linear as long as the order of the associations is not too far off -- the order of the components in the record type. If this is not the case -- the running time is at worst quadratic in the size of the association -- list. procedure Check_Misspelled_Component (Elements : Elist_Id; Component : Node_Id); -- Give possible misspelling diagnostic if Component is likely to be a -- misspelling of one of the components of the Assoc_List. This is called -- by Resolve_Aggr_Expr after producing an invalid component error message. procedure Check_Static_Discriminated_Subtype (T : Entity_Id; V : Node_Id); -- An optimization: determine whether a discriminated subtype has a static -- constraint, and contains array components whose length is also static, -- either because they are constrained by the discriminant, or because the -- original component bounds are static. ----------------------------------------------------- -- Subprograms used for ARRAY AGGREGATE Processing -- ----------------------------------------------------- function Resolve_Array_Aggregate (N : Node_Id; Index : Node_Id; Index_Constr : Node_Id; Component_Typ : Entity_Id; Others_Allowed : Boolean) return Boolean; -- This procedure performs the semantic checks for an array aggregate. -- True is returned if the aggregate resolution succeeds. -- -- The procedure works by recursively checking each nested aggregate. -- Specifically, after checking a sub-aggregate nested at the i-th level -- we recursively check all the subaggregates at the i+1-st level (if any). -- Note that for aggregates analysis and resolution go hand in hand. -- Aggregate analysis has been delayed up to here and it is done while -- resolving the aggregate. -- -- N is the current N_Aggregate node to be checked. -- -- Index is the index node corresponding to the array sub-aggregate that -- we are currently checking (RM 4.3.3 (8)). Its Etype is the -- corresponding index type (or subtype). -- -- Index_Constr is the node giving the applicable index constraint if -- any (RM 4.3.3 (10)). It "is a constraint provided by certain -- contexts [...] that can be used to determine the bounds of the array -- value specified by the aggregate". If Others_Allowed below is False -- there is no applicable index constraint and this node is set to Index. -- -- Component_Typ is the array component type. -- -- Others_Allowed indicates whether an others choice is allowed -- in the context where the top-level aggregate appeared. -- -- The algorithm of Resolve_Array_Aggregate proceeds as follows: -- -- 1. Make sure that the others choice, if present, is by itself and -- appears last in the sub-aggregate. Check that we do not have -- positional and named components in the array sub-aggregate (unless -- the named association is an others choice). Finally if an others -- choice is present, make sure it is allowed in the aggregate context. -- -- 2. If the array sub-aggregate contains discrete_choices: -- -- (A) Verify their validity. Specifically verify that: -- -- (a) If a null range is present it must be the only possible -- choice in the array aggregate. -- -- (b) Ditto for a non static range. -- -- (c) Ditto for a non static expression. -- -- In addition this step analyzes and resolves each discrete_choice, -- making sure that its type is the type of the corresponding Index. -- If we are not at the lowest array aggregate level (in the case of -- multi-dimensional aggregates) then invoke Resolve_Array_Aggregate -- recursively on each component expression. Otherwise, resolve the -- bottom level component expressions against the expected component -- type ONLY IF the component corresponds to a single discrete choice -- which is not an others choice (to see why read the DELAYED -- COMPONENT RESOLUTION below). -- -- (B) Determine the bounds of the sub-aggregate and lowest and -- highest choice values. -- -- 3. For positional aggregates: -- -- (A) Loop over the component expressions either recursively invoking -- Resolve_Array_Aggregate on each of these for multi-dimensional -- array aggregates or resolving the bottom level component -- expressions against the expected component type. -- -- (B) Determine the bounds of the positional sub-aggregates. -- -- 4. Try to determine statically whether the evaluation of the array -- sub-aggregate raises Constraint_Error. If yes emit proper -- warnings. The precise checks are the following: -- -- (A) Check that the index range defined by aggregate bounds is -- compatible with corresponding index subtype. -- We also check against the base type. In fact it could be that -- Low/High bounds of the base type are static whereas those of -- the index subtype are not. Thus if we can statically catch -- a problem with respect to the base type we are guaranteed -- that the same problem will arise with the index subtype -- -- (B) If we are dealing with a named aggregate containing an others -- choice and at least one discrete choice then make sure the range -- specified by the discrete choices does not overflow the -- aggregate bounds. We also check against the index type and base -- type bounds for the same reasons given in (A). -- -- (C) If we are dealing with a positional aggregate with an others -- choice make sure the number of positional elements specified -- does not overflow the aggregate bounds. We also check against -- the index type and base type bounds as mentioned in (A). -- -- Finally construct an N_Range node giving the sub-aggregate bounds. -- Set the Aggregate_Bounds field of the sub-aggregate to be this -- N_Range. The routine Array_Aggr_Subtype below uses such N_Ranges -- to build the appropriate aggregate subtype. Aggregate_Bounds -- information is needed during expansion. -- -- DELAYED COMPONENT RESOLUTION: The resolution of bottom level component -- expressions in an array aggregate may call Duplicate_Subexpr or some -- other routine that inserts code just outside the outermost aggregate. -- If the array aggregate contains discrete choices or an others choice, -- this may be wrong. Consider for instance the following example. -- -- type Rec is record -- V : Integer := 0; -- end record; -- -- type Acc_Rec is access Rec; -- Arr : array (1..3) of Acc_Rec := (1 .. 3 => new Rec); -- -- Then the transformation of "new Rec" that occurs during resolution -- entails the following code modifications -- -- P7b : constant Acc_Rec := new Rec; -- RecIP (P7b.all); -- Arr : array (1..3) of Acc_Rec := (1 .. 3 => P7b); -- -- This code transformation is clearly wrong, since we need to call -- "new Rec" for each of the 3 array elements. To avoid this problem we -- delay resolution of the components of non positional array aggregates -- to the expansion phase. As an optimization, if the discrete choice -- specifies a single value we do not delay resolution. function Array_Aggr_Subtype (N : Node_Id; Typ : Node_Id) return Entity_Id; -- This routine returns the type or subtype of an array aggregate. -- -- N is the array aggregate node whose type we return. -- -- Typ is the context type in which N occurs. -- -- This routine creates an implicit array subtype whose bounds are -- those defined by the aggregate. When this routine is invoked -- Resolve_Array_Aggregate has already processed aggregate N. Thus the -- Aggregate_Bounds of each sub-aggregate, is an N_Range node giving the -- sub-aggregate bounds. When building the aggregate itype, this function -- traverses the array aggregate N collecting such Aggregate_Bounds and -- constructs the proper array aggregate itype. -- -- Note that in the case of multidimensional aggregates each inner -- sub-aggregate corresponding to a given array dimension, may provide a -- different bounds. If it is possible to determine statically that -- some sub-aggregates corresponding to the same index do not have the -- same bounds, then a warning is emitted. If such check is not possible -- statically (because some sub-aggregate bounds are dynamic expressions) -- then this job is left to the expander. In all cases the particular -- bounds that this function will chose for a given dimension is the first -- N_Range node for a sub-aggregate corresponding to that dimension. -- -- Note that the Raises_Constraint_Error flag of an array aggregate -- whose evaluation is determined to raise CE by Resolve_Array_Aggregate, -- is set in Resolve_Array_Aggregate but the aggregate is not -- immediately replaced with a raise CE. In fact, Array_Aggr_Subtype must -- first construct the proper itype for the aggregate (Gigi needs -- this). After constructing the proper itype we will eventually replace -- the top-level aggregate with a raise CE (done in Resolve_Aggregate). -- Of course in cases such as: -- -- type Arr is array (integer range <>) of Integer; -- A : Arr := (positive range -1 .. 2 => 0); -- -- The bounds of the aggregate itype are cooked up to look reasonable -- (in this particular case the bounds will be 1 .. 2). procedure Make_String_Into_Aggregate (N : Node_Id); -- A string literal can appear in a context in which a one dimensional -- array of characters is expected. This procedure simply rewrites the -- string as an aggregate, prior to resolution. --------------------------------- -- Delta aggregate processing -- --------------------------------- procedure Resolve_Delta_Array_Aggregate (N : Node_Id; Typ : Entity_Id); procedure Resolve_Delta_Record_Aggregate (N : Node_Id; Typ : Entity_Id); ------------------------ -- Array_Aggr_Subtype -- ------------------------ function Array_Aggr_Subtype (N : Node_Id; Typ : Entity_Id) return Entity_Id is Aggr_Dimension : constant Pos := Number_Dimensions (Typ); -- Number of aggregate index dimensions Aggr_Range : array (1 .. Aggr_Dimension) of Node_Id := (others => Empty); -- Constrained N_Range of each index dimension in our aggregate itype Aggr_Low : array (1 .. Aggr_Dimension) of Node_Id := (others => Empty); Aggr_High : array (1 .. Aggr_Dimension) of Node_Id := (others => Empty); -- Low and High bounds for each index dimension in our aggregate itype Is_Fully_Positional : Boolean := True; procedure Collect_Aggr_Bounds (N : Node_Id; Dim : Pos); -- N is an array (sub-)aggregate. Dim is the dimension corresponding -- to (sub-)aggregate N. This procedure collects and removes the side -- effects of the constrained N_Range nodes corresponding to each index -- dimension of our aggregate itype. These N_Range nodes are collected -- in Aggr_Range above. -- -- Likewise collect in Aggr_Low & Aggr_High above the low and high -- bounds of each index dimension. If, when collecting, two bounds -- corresponding to the same dimension are static and found to differ, -- then emit a warning, and mark N as raising Constraint_Error. ------------------------- -- Collect_Aggr_Bounds -- ------------------------- procedure Collect_Aggr_Bounds (N : Node_Id; Dim : Pos) is This_Range : constant Node_Id := Aggregate_Bounds (N); -- The aggregate range node of this specific sub-aggregate This_Low : constant Node_Id := Low_Bound (Aggregate_Bounds (N)); This_High : constant Node_Id := High_Bound (Aggregate_Bounds (N)); -- The aggregate bounds of this specific sub-aggregate Assoc : Node_Id; Expr : Node_Id; begin Remove_Side_Effects (This_Low, Variable_Ref => True); Remove_Side_Effects (This_High, Variable_Ref => True); -- Collect the first N_Range for a given dimension that you find. -- For a given dimension they must be all equal anyway. if No (Aggr_Range (Dim)) then Aggr_Low (Dim) := This_Low; Aggr_High (Dim) := This_High; Aggr_Range (Dim) := This_Range; else if Compile_Time_Known_Value (This_Low) then if not Compile_Time_Known_Value (Aggr_Low (Dim)) then Aggr_Low (Dim) := This_Low; elsif Expr_Value (This_Low) /= Expr_Value (Aggr_Low (Dim)) then Set_Raises_Constraint_Error (N); Error_Msg_Warn := SPARK_Mode /= On; Error_Msg_N ("sub-aggregate low bound mismatch<<", N); Error_Msg_N ("\Constraint_Error [<<", N); end if; end if; if Compile_Time_Known_Value (This_High) then if not Compile_Time_Known_Value (Aggr_High (Dim)) then Aggr_High (Dim) := This_High; elsif Expr_Value (This_High) /= Expr_Value (Aggr_High (Dim)) then Set_Raises_Constraint_Error (N); Error_Msg_Warn := SPARK_Mode /= On; Error_Msg_N ("sub-aggregate high bound mismatch<<", N); Error_Msg_N ("\Constraint_Error [<<", N); end if; end if; end if; if Dim < Aggr_Dimension then -- Process positional components if Present (Expressions (N)) then Expr := First (Expressions (N)); while Present (Expr) loop Collect_Aggr_Bounds (Expr, Dim + 1); Next (Expr); end loop; end if; -- Process component associations if Present (Component_Associations (N)) then Is_Fully_Positional := False; Assoc := First (Component_Associations (N)); while Present (Assoc) loop Expr := Expression (Assoc); Collect_Aggr_Bounds (Expr, Dim + 1); Next (Assoc); end loop; end if; end if; end Collect_Aggr_Bounds; -- Array_Aggr_Subtype variables Itype : Entity_Id; -- The final itype of the overall aggregate Index_Constraints : constant List_Id := New_List; -- The list of index constraints of the aggregate itype -- Start of processing for Array_Aggr_Subtype begin -- Make sure that the list of index constraints is properly attached to -- the tree, and then collect the aggregate bounds. Set_Parent (Index_Constraints, N); Collect_Aggr_Bounds (N, 1); -- Build the list of constrained indexes of our aggregate itype for J in 1 .. Aggr_Dimension loop Create_Index : declare Index_Base : constant Entity_Id := Base_Type (Etype (Aggr_Range (J))); Index_Typ : Entity_Id; begin -- Construct the Index subtype, and associate it with the range -- construct that generates it. Index_Typ := Create_Itype (Subtype_Kind (Ekind (Index_Base)), Aggr_Range (J)); Set_Etype (Index_Typ, Index_Base); if Is_Character_Type (Index_Base) then Set_Is_Character_Type (Index_Typ); end if; Set_Size_Info (Index_Typ, (Index_Base)); Set_RM_Size (Index_Typ, RM_Size (Index_Base)); Set_First_Rep_Item (Index_Typ, First_Rep_Item (Index_Base)); Set_Scalar_Range (Index_Typ, Aggr_Range (J)); if Is_Discrete_Or_Fixed_Point_Type (Index_Typ) then Set_RM_Size (Index_Typ, UI_From_Int (Minimum_Size (Index_Typ))); end if; Set_Etype (Aggr_Range (J), Index_Typ); Append (Aggr_Range (J), To => Index_Constraints); end Create_Index; end loop; -- Now build the Itype Itype := Create_Itype (E_Array_Subtype, N); Set_First_Rep_Item (Itype, First_Rep_Item (Typ)); Set_Convention (Itype, Convention (Typ)); Set_Depends_On_Private (Itype, Has_Private_Component (Typ)); Set_Etype (Itype, Base_Type (Typ)); Set_Has_Alignment_Clause (Itype, Has_Alignment_Clause (Typ)); Set_Is_Aliased (Itype, Is_Aliased (Typ)); Set_Depends_On_Private (Itype, Depends_On_Private (Typ)); Copy_Suppress_Status (Index_Check, Typ, Itype); Copy_Suppress_Status (Length_Check, Typ, Itype); Set_First_Index (Itype, First (Index_Constraints)); Set_Is_Constrained (Itype, True); Set_Is_Internal (Itype, True); -- A simple optimization: purely positional aggregates of static -- components should be passed to gigi unexpanded whenever possible, and -- regardless of the staticness of the bounds themselves. Subsequent -- checks in exp_aggr verify that type is not packed, etc. Set_Size_Known_At_Compile_Time (Itype, Is_Fully_Positional and then Comes_From_Source (N) and then Size_Known_At_Compile_Time (Component_Type (Typ))); -- We always need a freeze node for a packed array subtype, so that we -- can build the Packed_Array_Impl_Type corresponding to the subtype. If -- expansion is disabled, the packed array subtype is not built, and we -- must not generate a freeze node for the type, or else it will appear -- incomplete to gigi. if Is_Packed (Itype) and then not In_Spec_Expression and then Expander_Active then Freeze_Itype (Itype, N); end if; return Itype; end Array_Aggr_Subtype; -------------------------------- -- Check_Misspelled_Component -- -------------------------------- procedure Check_Misspelled_Component (Elements : Elist_Id; Component : Node_Id) is Max_Suggestions : constant := 2; Nr_Of_Suggestions : Natural := 0; Suggestion_1 : Entity_Id := Empty; Suggestion_2 : Entity_Id := Empty; Component_Elmt : Elmt_Id; begin -- All the components of List are matched against Component and a count -- is maintained of possible misspellings. When at the end of the -- analysis there are one or two (not more) possible misspellings, -- these misspellings will be suggested as possible corrections. Component_Elmt := First_Elmt (Elements); while Nr_Of_Suggestions <= Max_Suggestions and then Present (Component_Elmt) loop if Is_Bad_Spelling_Of (Chars (Node (Component_Elmt)), Chars (Component)) then Nr_Of_Suggestions := Nr_Of_Suggestions + 1; case Nr_Of_Suggestions is when 1 => Suggestion_1 := Node (Component_Elmt); when 2 => Suggestion_2 := Node (Component_Elmt); when others => null; end case; end if; Next_Elmt (Component_Elmt); end loop; -- Report at most two suggestions if Nr_Of_Suggestions = 1 then Error_Msg_NE -- CODEFIX ("\possible misspelling of&", Component, Suggestion_1); elsif Nr_Of_Suggestions = 2 then Error_Msg_Node_2 := Suggestion_2; Error_Msg_NE -- CODEFIX ("\possible misspelling of& or&", Component, Suggestion_1); end if; end Check_Misspelled_Component; ---------------------------------------- -- Check_Expr_OK_In_Limited_Aggregate -- ---------------------------------------- procedure Check_Expr_OK_In_Limited_Aggregate (Expr : Node_Id) is begin if Is_Limited_Type (Etype (Expr)) and then Comes_From_Source (Expr) then if In_Instance_Body or else In_Inlined_Body then null; elsif not OK_For_Limited_Init (Etype (Expr), Expr) then Error_Msg_N ("initialization not allowed for limited types", Expr); Explain_Limited_Type (Etype (Expr), Expr); end if; end if; end Check_Expr_OK_In_Limited_Aggregate; ------------------------------- -- Check_Qualified_Aggregate -- ------------------------------- procedure Check_Qualified_Aggregate (Level : Nat; Expr : Node_Id) is Comp_Expr : Node_Id; Comp_Assn : Node_Id; begin if Level = 0 then if Nkind (Parent (Expr)) /= N_Qualified_Expression then Check_SPARK_05_Restriction ("aggregate should be qualified", Expr); end if; else Comp_Expr := First (Expressions (Expr)); while Present (Comp_Expr) loop if Nkind (Comp_Expr) = N_Aggregate then Check_Qualified_Aggregate (Level - 1, Comp_Expr); end if; Comp_Expr := Next (Comp_Expr); end loop; Comp_Assn := First (Component_Associations (Expr)); while Present (Comp_Assn) loop Comp_Expr := Expression (Comp_Assn); if Nkind (Comp_Expr) = N_Aggregate then Check_Qualified_Aggregate (Level - 1, Comp_Expr); end if; Comp_Assn := Next (Comp_Assn); end loop; end if; end Check_Qualified_Aggregate; ---------------------------------------- -- Check_Static_Discriminated_Subtype -- ---------------------------------------- procedure Check_Static_Discriminated_Subtype (T : Entity_Id; V : Node_Id) is Disc : constant Entity_Id := First_Discriminant (T); Comp : Entity_Id; Ind : Entity_Id; begin if Has_Record_Rep_Clause (T) then return; elsif Present (Next_Discriminant (Disc)) then return; elsif Nkind (V) /= N_Integer_Literal then return; end if; Comp := First_Component (T); while Present (Comp) loop if Is_Scalar_Type (Etype (Comp)) then null; elsif Is_Private_Type (Etype (Comp)) and then Present (Full_View (Etype (Comp))) and then Is_Scalar_Type (Full_View (Etype (Comp))) then null; elsif Is_Array_Type (Etype (Comp)) then if Is_Bit_Packed_Array (Etype (Comp)) then return; end if; Ind := First_Index (Etype (Comp)); while Present (Ind) loop if Nkind (Ind) /= N_Range or else Nkind (Low_Bound (Ind)) /= N_Integer_Literal or else Nkind (High_Bound (Ind)) /= N_Integer_Literal then return; end if; Next_Index (Ind); end loop; else return; end if; Next_Component (Comp); end loop; -- On exit, all components have statically known sizes Set_Size_Known_At_Compile_Time (T); end Check_Static_Discriminated_Subtype; ------------------------- -- Is_Others_Aggregate -- ------------------------- function Is_Others_Aggregate (Aggr : Node_Id) return Boolean is begin return No (Expressions (Aggr)) and then Nkind (First (Choice_List (First (Component_Associations (Aggr))))) = N_Others_Choice; end Is_Others_Aggregate; ---------------------------- -- Is_Top_Level_Aggregate -- ---------------------------- function Is_Top_Level_Aggregate (Expr : Node_Id) return Boolean is begin return Nkind (Parent (Expr)) /= N_Aggregate and then (Nkind (Parent (Expr)) /= N_Component_Association or else Nkind (Parent (Parent (Expr))) /= N_Aggregate); end Is_Top_Level_Aggregate; -------------------------------- -- Make_String_Into_Aggregate -- -------------------------------- procedure Make_String_Into_Aggregate (N : Node_Id) is Exprs : constant List_Id := New_List; Loc : constant Source_Ptr := Sloc (N); Str : constant String_Id := Strval (N); Strlen : constant Nat := String_Length (Str); C : Char_Code; C_Node : Node_Id; New_N : Node_Id; P : Source_Ptr; begin P := Loc + 1; for J in 1 .. Strlen loop C := Get_String_Char (Str, J); Set_Character_Literal_Name (C); C_Node := Make_Character_Literal (P, Chars => Name_Find, Char_Literal_Value => UI_From_CC (C)); Set_Etype (C_Node, Any_Character); Append_To (Exprs, C_Node); P := P + 1; -- Something special for wide strings??? end loop; New_N := Make_Aggregate (Loc, Expressions => Exprs); Set_Analyzed (New_N); Set_Etype (New_N, Any_Composite); Rewrite (N, New_N); end Make_String_Into_Aggregate; ----------------------- -- Resolve_Aggregate -- ----------------------- procedure Resolve_Aggregate (N : Node_Id; Typ : Entity_Id) is Loc : constant Source_Ptr := Sloc (N); Pkind : constant Node_Kind := Nkind (Parent (N)); Aggr_Subtyp : Entity_Id; -- The actual aggregate subtype. This is not necessarily the same as Typ -- which is the subtype of the context in which the aggregate was found. begin -- Ignore junk empty aggregate resulting from parser error if No (Expressions (N)) and then No (Component_Associations (N)) and then not Null_Record_Present (N) then return; end if; -- If the aggregate has box-initialized components, its type must be -- frozen so that initialization procedures can properly be called -- in the resolution that follows. The replacement of boxes with -- initialization calls is properly an expansion activity but it must -- be done during resolution. if Expander_Active and then Present (Component_Associations (N)) then declare Comp : Node_Id; begin Comp := First (Component_Associations (N)); while Present (Comp) loop if Box_Present (Comp) then Insert_Actions (N, Freeze_Entity (Typ, N)); exit; end if; Next (Comp); end loop; end; end if; -- An unqualified aggregate is restricted in SPARK to: -- An aggregate item inside an aggregate for a multi-dimensional array -- An expression being assigned to an unconstrained array, but only if -- the aggregate specifies a value for OTHERS only. if Nkind (Parent (N)) = N_Qualified_Expression then if Is_Array_Type (Typ) then Check_Qualified_Aggregate (Number_Dimensions (Typ), N); else Check_Qualified_Aggregate (1, N); end if; else if Is_Array_Type (Typ) and then Nkind (Parent (N)) = N_Assignment_Statement and then not Is_Constrained (Etype (Name (Parent (N)))) then if not Is_Others_Aggregate (N) then Check_SPARK_05_Restriction ("array aggregate should have only OTHERS", N); end if; elsif Is_Top_Level_Aggregate (N) then Check_SPARK_05_Restriction ("aggregate should be qualified", N); -- The legality of this unqualified aggregate is checked by calling -- Check_Qualified_Aggregate from one of its enclosing aggregate, -- unless one of these already causes an error to be issued. else null; end if; end if; -- Check for aggregates not allowed in configurable run-time mode. -- We allow all cases of aggregates that do not come from source, since -- these are all assumed to be small (e.g. bounds of a string literal). -- We also allow aggregates of types we know to be small. if not Support_Aggregates_On_Target and then Comes_From_Source (N) and then (not Known_Static_Esize (Typ) or else Esize (Typ) > 64) then Error_Msg_CRT ("aggregate", N); end if; -- Ada 2005 (AI-287): Limited aggregates allowed -- In an instance, ignore aggregate subcomponents tnat may be limited, -- because they originate in view conflicts. If the original aggregate -- is legal and the actuals are legal, the aggregate itself is legal. if Is_Limited_Type (Typ) and then Ada_Version < Ada_2005 and then not In_Instance then Error_Msg_N ("aggregate type cannot be limited", N); Explain_Limited_Type (Typ, N); elsif Is_Class_Wide_Type (Typ) then Error_Msg_N ("type of aggregate cannot be class-wide", N); elsif Typ = Any_String or else Typ = Any_Composite then Error_Msg_N ("no unique type for aggregate", N); Set_Etype (N, Any_Composite); elsif Is_Array_Type (Typ) and then Null_Record_Present (N) then Error_Msg_N ("null record forbidden in array aggregate", N); elsif Is_Record_Type (Typ) then Resolve_Record_Aggregate (N, Typ); elsif Is_Array_Type (Typ) then -- First a special test, for the case of a positional aggregate of -- characters which can be replaced by a string literal. -- Do not perform this transformation if this was a string literal -- to start with, whose components needed constraint checks, or if -- the component type is non-static, because it will require those -- checks and be transformed back into an aggregate. If the index -- type is not Integer the aggregate may represent a user-defined -- string type but the context might need the original type so we -- do not perform the transformation at this point. if Number_Dimensions (Typ) = 1 and then Is_Standard_Character_Type (Component_Type (Typ)) and then No (Component_Associations (N)) and then not Is_Limited_Composite (Typ) and then not Is_Private_Composite (Typ) and then not Is_Bit_Packed_Array (Typ) and then Nkind (Original_Node (Parent (N))) /= N_String_Literal and then Is_OK_Static_Subtype (Component_Type (Typ)) and then Base_Type (Etype (First_Index (Typ))) = Base_Type (Standard_Integer) then declare Expr : Node_Id; begin Expr := First (Expressions (N)); while Present (Expr) loop exit when Nkind (Expr) /= N_Character_Literal; Next (Expr); end loop; if No (Expr) then Start_String; Expr := First (Expressions (N)); while Present (Expr) loop Store_String_Char (UI_To_CC (Char_Literal_Value (Expr))); Next (Expr); end loop; Rewrite (N, Make_String_Literal (Loc, End_String)); Analyze_And_Resolve (N, Typ); return; end if; end; end if; -- Here if we have a real aggregate to deal with Array_Aggregate : declare Aggr_Resolved : Boolean; Aggr_Typ : constant Entity_Id := Etype (Typ); -- This is the unconstrained array type, which is the type against -- which the aggregate is to be resolved. Typ itself is the array -- type of the context which may not be the same subtype as the -- subtype for the final aggregate. begin -- In the following we determine whether an OTHERS choice is -- allowed inside the array aggregate. The test checks the context -- in which the array aggregate occurs. If the context does not -- permit it, or the aggregate type is unconstrained, an OTHERS -- choice is not allowed (except that it is always allowed on the -- right-hand side of an assignment statement; in this case the -- constrainedness of the type doesn't matter). -- If expansion is disabled (generic context, or semantics-only -- mode) actual subtypes cannot be constructed, and the type of an -- object may be its unconstrained nominal type. However, if the -- context is an assignment, we assume that OTHERS is allowed, -- because the target of the assignment will have a constrained -- subtype when fully compiled. Ditto if the context is an -- initialization procedure where a component may have a predicate -- function that carries the base type. -- Note that there is no node for Explicit_Actual_Parameter. -- To test for this context we therefore have to test for node -- N_Parameter_Association which itself appears only if there is a -- formal parameter. Consequently we also need to test for -- N_Procedure_Call_Statement or N_Function_Call. -- The context may be an N_Reference node, created by expansion. -- Legality of the others clause was established in the source, -- so the context is legal. Set_Etype (N, Aggr_Typ); -- May be overridden later on if Pkind = N_Assignment_Statement or else Inside_Init_Proc or else (Is_Constrained (Typ) and then (Pkind = N_Parameter_Association or else Pkind = N_Function_Call or else Pkind = N_Procedure_Call_Statement or else Pkind = N_Generic_Association or else Pkind = N_Formal_Object_Declaration or else Pkind = N_Simple_Return_Statement or else Pkind = N_Object_Declaration or else Pkind = N_Component_Declaration or else Pkind = N_Parameter_Specification or else Pkind = N_Qualified_Expression or else Pkind = N_Reference or else Pkind = N_Aggregate or else Pkind = N_Extension_Aggregate or else Pkind = N_Component_Association)) then Aggr_Resolved := Resolve_Array_Aggregate (N, Index => First_Index (Aggr_Typ), Index_Constr => First_Index (Typ), Component_Typ => Component_Type (Typ), Others_Allowed => True); else Aggr_Resolved := Resolve_Array_Aggregate (N, Index => First_Index (Aggr_Typ), Index_Constr => First_Index (Aggr_Typ), Component_Typ => Component_Type (Typ), Others_Allowed => False); end if; if not Aggr_Resolved then -- A parenthesized expression may have been intended as an -- aggregate, leading to a type error when analyzing the -- component. This can also happen for a nested component -- (see Analyze_Aggr_Expr). if Paren_Count (N) > 0 then Error_Msg_N ("positional aggregate cannot have one component", N); end if; Aggr_Subtyp := Any_Composite; else Aggr_Subtyp := Array_Aggr_Subtype (N, Typ); end if; Set_Etype (N, Aggr_Subtyp); end Array_Aggregate; elsif Is_Private_Type (Typ) and then Present (Full_View (Typ)) and then (In_Inlined_Body or In_Instance_Body) and then Is_Composite_Type (Full_View (Typ)) then Resolve (N, Full_View (Typ)); else Error_Msg_N ("illegal context for aggregate", N); end if; -- If we can determine statically that the evaluation of the aggregate -- raises Constraint_Error, then replace the aggregate with an -- N_Raise_Constraint_Error node, but set the Etype to the right -- aggregate subtype. Gigi needs this. if Raises_Constraint_Error (N) then Aggr_Subtyp := Etype (N); Rewrite (N, Make_Raise_Constraint_Error (Loc, Reason => CE_Range_Check_Failed)); Set_Raises_Constraint_Error (N); Set_Etype (N, Aggr_Subtyp); Set_Analyzed (N); end if; Check_Function_Writable_Actuals (N); end Resolve_Aggregate; ----------------------------- -- Resolve_Array_Aggregate -- ----------------------------- function Resolve_Array_Aggregate (N : Node_Id; Index : Node_Id; Index_Constr : Node_Id; Component_Typ : Entity_Id; Others_Allowed : Boolean) return Boolean is Loc : constant Source_Ptr := Sloc (N); Failure : constant Boolean := False; Success : constant Boolean := True; Index_Typ : constant Entity_Id := Etype (Index); Index_Typ_Low : constant Node_Id := Type_Low_Bound (Index_Typ); Index_Typ_High : constant Node_Id := Type_High_Bound (Index_Typ); -- The type of the index corresponding to the array sub-aggregate along -- with its low and upper bounds. Index_Base : constant Entity_Id := Base_Type (Index_Typ); Index_Base_Low : constant Node_Id := Type_Low_Bound (Index_Base); Index_Base_High : constant Node_Id := Type_High_Bound (Index_Base); -- Ditto for the base type Others_Present : Boolean := False; Nb_Choices : Nat := 0; -- Contains the overall number of named choices in this sub-aggregate function Add (Val : Uint; To : Node_Id) return Node_Id; -- Creates a new expression node where Val is added to expression To. -- Tries to constant fold whenever possible. To must be an already -- analyzed expression. procedure Check_Bound (BH : Node_Id; AH : in out Node_Id); -- Checks that AH (the upper bound of an array aggregate) is less than -- or equal to BH (the upper bound of the index base type). If the check -- fails, a warning is emitted, the Raises_Constraint_Error flag of N is -- set, and AH is replaced with a duplicate of BH. procedure Check_Bounds (L, H : Node_Id; AL, AH : Node_Id); -- Checks that range AL .. AH is compatible with range L .. H. Emits a -- warning if not and sets the Raises_Constraint_Error flag in N. procedure Check_Length (L, H : Node_Id; Len : Uint); -- Checks that range L .. H contains at least Len elements. Emits a -- warning if not and sets the Raises_Constraint_Error flag in N. function Dynamic_Or_Null_Range (L, H : Node_Id) return Boolean; -- Returns True if range L .. H is dynamic or null procedure Get (Value : out Uint; From : Node_Id; OK : out Boolean); -- Given expression node From, this routine sets OK to False if it -- cannot statically evaluate From. Otherwise it stores this static -- value into Value. function Resolve_Aggr_Expr (Expr : Node_Id; Single_Elmt : Boolean) return Boolean; -- Resolves aggregate expression Expr. Returns False if resolution -- fails. If Single_Elmt is set to False, the expression Expr may be -- used to initialize several array aggregate elements (this can happen -- for discrete choices such as "L .. H => Expr" or the OTHERS choice). -- In this event we do not resolve Expr unless expansion is disabled. -- To know why, see the DELAYED COMPONENT RESOLUTION note above. -- -- NOTE: In the case of "... => <>", we pass the in the -- N_Component_Association node as Expr, since there is no Expression in -- that case, and we need a Sloc for the error message. procedure Resolve_Iterated_Component_Association (N : Node_Id; Index_Typ : Entity_Id); -- For AI12-061 --------- -- Add -- --------- function Add (Val : Uint; To : Node_Id) return Node_Id is Expr_Pos : Node_Id; Expr : Node_Id; To_Pos : Node_Id; begin if Raises_Constraint_Error (To) then return To; end if; -- First test if we can do constant folding if Compile_Time_Known_Value (To) or else Nkind (To) = N_Integer_Literal then Expr_Pos := Make_Integer_Literal (Loc, Expr_Value (To) + Val); Set_Is_Static_Expression (Expr_Pos); Set_Etype (Expr_Pos, Etype (To)); Set_Analyzed (Expr_Pos, Analyzed (To)); if not Is_Enumeration_Type (Index_Typ) then Expr := Expr_Pos; -- If we are dealing with enumeration return -- Index_Typ'Val (Expr_Pos) else Expr := Make_Attribute_Reference (Loc, Prefix => New_Occurrence_Of (Index_Typ, Loc), Attribute_Name => Name_Val, Expressions => New_List (Expr_Pos)); end if; return Expr; end if; -- If we are here no constant folding possible if not Is_Enumeration_Type (Index_Base) then Expr := Make_Op_Add (Loc, Left_Opnd => Duplicate_Subexpr (To), Right_Opnd => Make_Integer_Literal (Loc, Val)); -- If we are dealing with enumeration return -- Index_Typ'Val (Index_Typ'Pos (To) + Val) else To_Pos := Make_Attribute_Reference (Loc, Prefix => New_Occurrence_Of (Index_Typ, Loc), Attribute_Name => Name_Pos, Expressions => New_List (Duplicate_Subexpr (To))); Expr_Pos := Make_Op_Add (Loc, Left_Opnd => To_Pos, Right_Opnd => Make_Integer_Literal (Loc, Val)); Expr := Make_Attribute_Reference (Loc, Prefix => New_Occurrence_Of (Index_Typ, Loc), Attribute_Name => Name_Val, Expressions => New_List (Expr_Pos)); -- If the index type has a non standard representation, the -- attributes 'Val and 'Pos expand into function calls and the -- resulting expression is considered non-safe for reevaluation -- by the backend. Relocate it into a constant temporary in order -- to make it safe for reevaluation. if Has_Non_Standard_Rep (Etype (N)) then declare Def_Id : Entity_Id; begin Def_Id := Make_Temporary (Loc, 'R', Expr); Set_Etype (Def_Id, Index_Typ); Insert_Action (N, Make_Object_Declaration (Loc, Defining_Identifier => Def_Id, Object_Definition => New_Occurrence_Of (Index_Typ, Loc), Constant_Present => True, Expression => Relocate_Node (Expr))); Expr := New_Occurrence_Of (Def_Id, Loc); end; end if; end if; return Expr; end Add; ----------------- -- Check_Bound -- ----------------- procedure Check_Bound (BH : Node_Id; AH : in out Node_Id) is Val_BH : Uint; Val_AH : Uint; OK_BH : Boolean; OK_AH : Boolean; begin Get (Value => Val_BH, From => BH, OK => OK_BH); Get (Value => Val_AH, From => AH, OK => OK_AH); if OK_BH and then OK_AH and then Val_BH < Val_AH then Set_Raises_Constraint_Error (N); Error_Msg_Warn := SPARK_Mode /= On; Error_Msg_N ("upper bound out of range<<", AH); Error_Msg_N ("\Constraint_Error [<<", AH); -- You need to set AH to BH or else in the case of enumerations -- indexes we will not be able to resolve the aggregate bounds. AH := Duplicate_Subexpr (BH); end if; end Check_Bound; ------------------ -- Check_Bounds -- ------------------ procedure Check_Bounds (L, H : Node_Id; AL, AH : Node_Id) is Val_L : Uint; Val_H : Uint; Val_AL : Uint; Val_AH : Uint; OK_L : Boolean; OK_H : Boolean; OK_AL : Boolean; OK_AH : Boolean; pragma Warnings (Off, OK_AL); pragma Warnings (Off, OK_AH); begin if Raises_Constraint_Error (N) or else Dynamic_Or_Null_Range (AL, AH) then return; end if; Get (Value => Val_L, From => L, OK => OK_L); Get (Value => Val_H, From => H, OK => OK_H); Get (Value => Val_AL, From => AL, OK => OK_AL); Get (Value => Val_AH, From => AH, OK => OK_AH); if OK_L and then Val_L > Val_AL then Set_Raises_Constraint_Error (N); Error_Msg_Warn := SPARK_Mode /= On; Error_Msg_N ("lower bound of aggregate out of range<<", N); Error_Msg_N ("\Constraint_Error [<<", N); end if; if OK_H and then Val_H < Val_AH then Set_Raises_Constraint_Error (N); Error_Msg_Warn := SPARK_Mode /= On; Error_Msg_N ("upper bound of aggregate out of range<<", N); Error_Msg_N ("\Constraint_Error [<<", N); end if; end Check_Bounds; ------------------ -- Check_Length -- ------------------ procedure Check_Length (L, H : Node_Id; Len : Uint) is Val_L : Uint; Val_H : Uint; OK_L : Boolean; OK_H : Boolean; Range_Len : Uint; begin if Raises_Constraint_Error (N) then return; end if; Get (Value => Val_L, From => L, OK => OK_L); Get (Value => Val_H, From => H, OK => OK_H); if not OK_L or else not OK_H then return; end if; -- If null range length is zero if Val_L > Val_H then Range_Len := Uint_0; else Range_Len := Val_H - Val_L + 1; end if; if Range_Len < Len then Set_Raises_Constraint_Error (N); Error_Msg_Warn := SPARK_Mode /= On; Error_Msg_N ("too many elements<<", N); Error_Msg_N ("\Constraint_Error [<<", N); end if; end Check_Length; --------------------------- -- Dynamic_Or_Null_Range -- --------------------------- function Dynamic_Or_Null_Range (L, H : Node_Id) return Boolean is Val_L : Uint; Val_H : Uint; OK_L : Boolean; OK_H : Boolean; begin Get (Value => Val_L, From => L, OK => OK_L); Get (Value => Val_H, From => H, OK => OK_H); return not OK_L or else not OK_H or else not Is_OK_Static_Expression (L) or else not Is_OK_Static_Expression (H) or else Val_L > Val_H; end Dynamic_Or_Null_Range; --------- -- Get -- --------- procedure Get (Value : out Uint; From : Node_Id; OK : out Boolean) is begin OK := True; if Compile_Time_Known_Value (From) then Value := Expr_Value (From); -- If expression From is something like Some_Type'Val (10) then -- Value = 10. elsif Nkind (From) = N_Attribute_Reference and then Attribute_Name (From) = Name_Val and then Compile_Time_Known_Value (First (Expressions (From))) then Value := Expr_Value (First (Expressions (From))); else Value := Uint_0; OK := False; end if; end Get; ----------------------- -- Resolve_Aggr_Expr -- ----------------------- function Resolve_Aggr_Expr (Expr : Node_Id; Single_Elmt : Boolean) return Boolean is Nxt_Ind : constant Node_Id := Next_Index (Index); Nxt_Ind_Constr : constant Node_Id := Next_Index (Index_Constr); -- Index is the current index corresponding to the expression Resolution_OK : Boolean := True; -- Set to False if resolution of the expression failed begin -- Defend against previous errors if Nkind (Expr) = N_Error or else Error_Posted (Expr) then return True; end if; -- If the array type against which we are resolving the aggregate -- has several dimensions, the expressions nested inside the -- aggregate must be further aggregates (or strings). if Present (Nxt_Ind) then if Nkind (Expr) /= N_Aggregate then -- A string literal can appear where a one-dimensional array -- of characters is expected. If the literal looks like an -- operator, it is still an operator symbol, which will be -- transformed into a string when analyzed. if Is_Character_Type (Component_Typ) and then No (Next_Index (Nxt_Ind)) and then Nkind_In (Expr, N_String_Literal, N_Operator_Symbol) then -- A string literal used in a multidimensional array -- aggregate in place of the final one-dimensional -- aggregate must not be enclosed in parentheses. if Paren_Count (Expr) /= 0 then Error_Msg_N ("no parenthesis allowed here", Expr); end if; Make_String_Into_Aggregate (Expr); else Error_Msg_N ("nested array aggregate expected", Expr); -- If the expression is parenthesized, this may be -- a missing component association for a 1-aggregate. if Paren_Count (Expr) > 0 then Error_Msg_N ("\if single-component aggregate is intended, " & "write e.g. (1 ='> ...)", Expr); end if; return Failure; end if; end if; -- If it's "... => <>", nothing to resolve if Nkind (Expr) = N_Component_Association then pragma Assert (Box_Present (Expr)); return Success; end if; -- Ada 2005 (AI-231): Propagate the type to the nested aggregate. -- Required to check the null-exclusion attribute (if present). -- This value may be overridden later on. Set_Etype (Expr, Etype (N)); Resolution_OK := Resolve_Array_Aggregate (Expr, Nxt_Ind, Nxt_Ind_Constr, Component_Typ, Others_Allowed); else -- If it's "... => <>", nothing to resolve if Nkind (Expr) = N_Component_Association then pragma Assert (Box_Present (Expr)); return Success; end if; -- Do not resolve the expressions of discrete or others choices -- unless the expression covers a single component, or the -- expander is inactive. -- In SPARK mode, expressions that can perform side effects will -- be recognized by the gnat2why back-end, and the whole -- subprogram will be ignored. So semantic analysis can be -- performed safely. if Single_Elmt or else not Expander_Active or else In_Spec_Expression then Analyze_And_Resolve (Expr, Component_Typ); Check_Expr_OK_In_Limited_Aggregate (Expr); Check_Non_Static_Context (Expr); Aggregate_Constraint_Checks (Expr, Component_Typ); Check_Unset_Reference (Expr); end if; end if; -- If an aggregate component has a type with predicates, an explicit -- predicate check must be applied, as for an assignment statement, -- because the aggegate might not be expanded into individual -- component assignments. If the expression covers several components -- the analysis and the predicate check take place later. if Present (Predicate_Function (Component_Typ)) and then Analyzed (Expr) then Apply_Predicate_Check (Expr, Component_Typ); end if; if Raises_Constraint_Error (Expr) and then Nkind (Parent (Expr)) /= N_Component_Association then Set_Raises_Constraint_Error (N); end if; -- If the expression has been marked as requiring a range check, -- then generate it here. It's a bit odd to be generating such -- checks in the analyzer, but harmless since Generate_Range_Check -- does nothing (other than making sure Do_Range_Check is set) if -- the expander is not active. if Do_Range_Check (Expr) then Generate_Range_Check (Expr, Component_Typ, CE_Range_Check_Failed); end if; return Resolution_OK; end Resolve_Aggr_Expr; -------------------------------------------- -- Resolve_Iterated_Component_Association -- -------------------------------------------- procedure Resolve_Iterated_Component_Association (N : Node_Id; Index_Typ : Entity_Id) is Loc : constant Source_Ptr := Sloc (N); Choice : Node_Id; Dummy : Boolean; Ent : Entity_Id; Expr : Node_Id; Id : Entity_Id; begin Choice := First (Discrete_Choices (N)); while Present (Choice) loop if Nkind (Choice) = N_Others_Choice then Others_Present := True; else Analyze (Choice); -- Choice can be a subtype name, a range, or an expression if Is_Entity_Name (Choice) and then Is_Type (Entity (Choice)) and then Base_Type (Entity (Choice)) = Base_Type (Index_Typ) then null; else Analyze_And_Resolve (Choice, Index_Typ); end if; end if; Next (Choice); end loop; -- Create a scope in which to introduce an index, which is usually -- visible in the expression for the component, and needed for its -- analysis. Ent := New_Internal_Entity (E_Loop, Current_Scope, Loc, 'L'); Set_Etype (Ent, Standard_Void_Type); Set_Parent (Ent, Parent (N)); Push_Scope (Ent); Id := Make_Defining_Identifier (Loc, Chars => Chars (Defining_Identifier (N))); -- Insert and decorate the index variable in the current scope. -- The expression has to be analyzed once the index variable is -- directly visible. Mark the variable as referenced to prevent -- spurious warnings, given that subsequent uses of its name in the -- expression will reference the internal (synonym) loop variable. Enter_Name (Id); Set_Etype (Id, Index_Typ); Set_Ekind (Id, E_Variable); Set_Scope (Id, Ent); Set_Referenced (Id); -- Analyze a copy of the expression, to verify legality. We use -- a copy because the expression will be analyzed anew when the -- enclosing aggregate is expanded, and the construct is rewritten -- as a loop with a new index variable. Expr := New_Copy_Tree (Expression (N)); Dummy := Resolve_Aggr_Expr (Expr, False); -- An iterated_component_association may appear in a nested -- aggregate for a multidimensional structure: preserve the bounds -- computed for the expression, as well as the anonymous array -- type generated for it; both are needed during array expansion. -- This does not work for more than two levels of nesting. ??? if Nkind (Expr) = N_Aggregate then Set_Aggregate_Bounds (Expression (N), Aggregate_Bounds (Expr)); Set_Etype (Expression (N), Etype (Expr)); end if; End_Scope; end Resolve_Iterated_Component_Association; -- Local variables Assoc : Node_Id; Choice : Node_Id; Expr : Node_Id; Discard : Node_Id; Aggr_Low : Node_Id := Empty; Aggr_High : Node_Id := Empty; -- The actual low and high bounds of this sub-aggregate Case_Table_Size : Nat; -- Contains the size of the case table needed to sort aggregate choices Choices_Low : Node_Id := Empty; Choices_High : Node_Id := Empty; -- The lowest and highest discrete choices values for a named aggregate Delete_Choice : Boolean; -- Used when replacing a subtype choice with predicate by a list Nb_Elements : Uint := Uint_0; -- The number of elements in a positional aggregate Nb_Discrete_Choices : Nat := 0; -- The overall number of discrete choices (not counting others choice) -- Start of processing for Resolve_Array_Aggregate begin -- Ignore junk empty aggregate resulting from parser error if No (Expressions (N)) and then No (Component_Associations (N)) and then not Null_Record_Present (N) then return False; end if; -- STEP 1: make sure the aggregate is correctly formatted if Present (Component_Associations (N)) then Assoc := First (Component_Associations (N)); while Present (Assoc) loop if Nkind (Assoc) = N_Iterated_Component_Association then Resolve_Iterated_Component_Association (Assoc, Index_Typ); end if; Choice := First (Choice_List (Assoc)); Delete_Choice := False; while Present (Choice) loop if Nkind (Choice) = N_Others_Choice then Others_Present := True; if Choice /= First (Choice_List (Assoc)) or else Present (Next (Choice)) then Error_Msg_N ("OTHERS must appear alone in a choice list", Choice); return Failure; end if; if Present (Next (Assoc)) then Error_Msg_N ("OTHERS must appear last in an aggregate", Choice); return Failure; end if; if Ada_Version = Ada_83 and then Assoc /= First (Component_Associations (N)) and then Nkind_In (Parent (N), N_Assignment_Statement, N_Object_Declaration) then Error_Msg_N ("(Ada 83) illegal context for OTHERS choice", N); end if; elsif Is_Entity_Name (Choice) then Analyze (Choice); declare E : constant Entity_Id := Entity (Choice); New_Cs : List_Id; P : Node_Id; C : Node_Id; begin if Is_Type (E) and then Has_Predicates (E) then Freeze_Before (N, E); if Has_Dynamic_Predicate_Aspect (E) then Error_Msg_NE ("subtype& has dynamic predicate, not allowed " & "in aggregate choice", Choice, E); elsif not Is_OK_Static_Subtype (E) then Error_Msg_NE ("non-static subtype& has predicate, not allowed " & "in aggregate choice", Choice, E); end if; -- If the subtype has a static predicate, replace the -- original choice with the list of individual values -- covered by the predicate. Do not perform this -- transformation if we need to preserve the source -- for ASIS use. -- This should be deferred to expansion time ??? if Present (Static_Discrete_Predicate (E)) and then not ASIS_Mode then Delete_Choice := True; New_Cs := New_List; P := First (Static_Discrete_Predicate (E)); while Present (P) loop C := New_Copy (P); Set_Sloc (C, Sloc (Choice)); Append_To (New_Cs, C); Next (P); end loop; Insert_List_After (Choice, New_Cs); end if; end if; end; end if; Nb_Choices := Nb_Choices + 1; declare C : constant Node_Id := Choice; begin Next (Choice); if Delete_Choice then Remove (C); Nb_Choices := Nb_Choices - 1; Delete_Choice := False; end if; end; end loop; Next (Assoc); end loop; end if; -- At this point we know that the others choice, if present, is by -- itself and appears last in the aggregate. Check if we have mixed -- positional and discrete associations (other than the others choice). if Present (Expressions (N)) and then (Nb_Choices > 1 or else (Nb_Choices = 1 and then not Others_Present)) then Error_Msg_N ("named association cannot follow positional association", First (Choice_List (First (Component_Associations (N))))); return Failure; end if; -- Test for the validity of an others choice if present if Others_Present and then not Others_Allowed then Error_Msg_N ("OTHERS choice not allowed here", First (Choices (First (Component_Associations (N))))); return Failure; end if; -- Protect against cascaded errors if Etype (Index_Typ) = Any_Type then return Failure; end if; -- STEP 2: Process named components if No (Expressions (N)) then if Others_Present then Case_Table_Size := Nb_Choices - 1; else Case_Table_Size := Nb_Choices; end if; Step_2 : declare function Empty_Range (A : Node_Id) return Boolean; -- If an association covers an empty range, some warnings on the -- expression of the association can be disabled. ----------------- -- Empty_Range -- ----------------- function Empty_Range (A : Node_Id) return Boolean is R : constant Node_Id := First (Choices (A)); begin return No (Next (R)) and then Nkind (R) = N_Range and then Compile_Time_Compare (Low_Bound (R), High_Bound (R), False) = GT; end Empty_Range; -- Local variables Low : Node_Id; High : Node_Id; -- Denote the lowest and highest values in an aggregate choice S_Low : Node_Id := Empty; S_High : Node_Id := Empty; -- if a choice in an aggregate is a subtype indication these -- denote the lowest and highest values of the subtype Table : Case_Table_Type (0 .. Case_Table_Size); -- Used to sort all the different choice values. Entry zero is -- reserved for sorting purposes. Single_Choice : Boolean; -- Set to true every time there is a single discrete choice in a -- discrete association Prev_Nb_Discrete_Choices : Nat; -- Used to keep track of the number of discrete choices in the -- current association. Errors_Posted_On_Choices : Boolean := False; -- Keeps track of whether any choices have semantic errors -- Start of processing for Step_2 begin -- STEP 2 (A): Check discrete choices validity Assoc := First (Component_Associations (N)); while Present (Assoc) loop Prev_Nb_Discrete_Choices := Nb_Discrete_Choices; Choice := First (Choice_List (Assoc)); loop Analyze (Choice); if Nkind (Choice) = N_Others_Choice then Single_Choice := False; exit; -- Test for subtype mark without constraint elsif Is_Entity_Name (Choice) and then Is_Type (Entity (Choice)) then if Base_Type (Entity (Choice)) /= Index_Base then Error_Msg_N ("invalid subtype mark in aggregate choice", Choice); return Failure; end if; -- Case of subtype indication elsif Nkind (Choice) = N_Subtype_Indication then Resolve_Discrete_Subtype_Indication (Choice, Index_Base); if Has_Dynamic_Predicate_Aspect (Entity (Subtype_Mark (Choice))) then Error_Msg_NE ("subtype& has dynamic predicate, " & "not allowed in aggregate choice", Choice, Entity (Subtype_Mark (Choice))); end if; -- Does the subtype indication evaluation raise CE? Get_Index_Bounds (Subtype_Mark (Choice), S_Low, S_High); Get_Index_Bounds (Choice, Low, High); Check_Bounds (S_Low, S_High, Low, High); -- Case of range or expression else Resolve (Choice, Index_Base); Check_Unset_Reference (Choice); Check_Non_Static_Context (Choice); -- If semantic errors were posted on the choice, then -- record that for possible early return from later -- processing (see handling of enumeration choices). if Error_Posted (Choice) then Errors_Posted_On_Choices := True; end if; -- Do not range check a choice. This check is redundant -- since this test is already done when we check that the -- bounds of the array aggregate are within range. Set_Do_Range_Check (Choice, False); -- In SPARK, the choice must be static if not (Is_OK_Static_Expression (Choice) or else (Nkind (Choice) = N_Range and then Is_OK_Static_Range (Choice))) then Check_SPARK_05_Restriction ("choice should be static", Choice); end if; end if; -- If we could not resolve the discrete choice stop here if Etype (Choice) = Any_Type then return Failure; -- If the discrete choice raises CE get its original bounds elsif Nkind (Choice) = N_Raise_Constraint_Error then Set_Raises_Constraint_Error (N); Get_Index_Bounds (Original_Node (Choice), Low, High); -- Otherwise get its bounds as usual else Get_Index_Bounds (Choice, Low, High); end if; if (Dynamic_Or_Null_Range (Low, High) or else (Nkind (Choice) = N_Subtype_Indication and then Dynamic_Or_Null_Range (S_Low, S_High))) and then Nb_Choices /= 1 then Error_Msg_N ("dynamic or empty choice in aggregate " & "must be the only choice", Choice); return Failure; end if; if not (All_Composite_Constraints_Static (Low) and then All_Composite_Constraints_Static (High) and then All_Composite_Constraints_Static (S_Low) and then All_Composite_Constraints_Static (S_High)) then Check_Restriction (No_Dynamic_Sized_Objects, Choice); end if; Nb_Discrete_Choices := Nb_Discrete_Choices + 1; Table (Nb_Discrete_Choices).Lo := Low; Table (Nb_Discrete_Choices).Hi := High; Table (Nb_Discrete_Choices).Choice := Choice; Next (Choice); if No (Choice) then -- Check if we have a single discrete choice and whether -- this discrete choice specifies a single value. Single_Choice := (Nb_Discrete_Choices = Prev_Nb_Discrete_Choices + 1) and then (Low = High); exit; end if; end loop; -- Ada 2005 (AI-231) if Ada_Version >= Ada_2005 and then Known_Null (Expression (Assoc)) and then not Empty_Range (Assoc) then Check_Can_Never_Be_Null (Etype (N), Expression (Assoc)); end if; -- Ada 2005 (AI-287): In case of default initialized component -- we delay the resolution to the expansion phase. if Box_Present (Assoc) then -- Ada 2005 (AI-287): In case of default initialization of a -- component the expander will generate calls to the -- corresponding initialization subprogram. We need to call -- Resolve_Aggr_Expr to check the rules about -- dimensionality. if not Resolve_Aggr_Expr (Assoc, Single_Elmt => Single_Choice) then return Failure; end if; elsif Nkind (Assoc) = N_Iterated_Component_Association then null; -- handled above, in a loop context. elsif not Resolve_Aggr_Expr (Expression (Assoc), Single_Elmt => Single_Choice) then return Failure; -- Check incorrect use of dynamically tagged expression -- We differentiate here two cases because the expression may -- not be decorated. For example, the analysis and resolution -- of the expression associated with the others choice will be -- done later with the full aggregate. In such case we -- duplicate the expression tree to analyze the copy and -- perform the required check. elsif not Present (Etype (Expression (Assoc))) then declare Save_Analysis : constant Boolean := Full_Analysis; Expr : constant Node_Id := New_Copy_Tree (Expression (Assoc)); begin Expander_Mode_Save_And_Set (False); Full_Analysis := False; -- Analyze the expression, making sure it is properly -- attached to the tree before we do the analysis. Set_Parent (Expr, Parent (Expression (Assoc))); Analyze (Expr); -- Compute its dimensions now, rather than at the end of -- resolution, because in the case of multidimensional -- aggregates subsequent expansion may lead to spurious -- errors. Check_Expression_Dimensions (Expr, Component_Typ); -- If the expression is a literal, propagate this info -- to the expression in the association, to enable some -- optimizations downstream. if Is_Entity_Name (Expr) and then Present (Entity (Expr)) and then Ekind (Entity (Expr)) = E_Enumeration_Literal then Analyze_And_Resolve (Expression (Assoc), Component_Typ); end if; Full_Analysis := Save_Analysis; Expander_Mode_Restore; if Is_Tagged_Type (Etype (Expr)) then Check_Dynamically_Tagged_Expression (Expr => Expr, Typ => Component_Type (Etype (N)), Related_Nod => N); end if; end; elsif Is_Tagged_Type (Etype (Expression (Assoc))) then Check_Dynamically_Tagged_Expression (Expr => Expression (Assoc), Typ => Component_Type (Etype (N)), Related_Nod => N); end if; Next (Assoc); end loop; -- If aggregate contains more than one choice then these must be -- static. Check for duplicate and missing values. -- Note: there is duplicated code here wrt Check_Choice_Set in -- the body of Sem_Case, and it is possible we could just reuse -- that procedure. To be checked ??? if Nb_Discrete_Choices > 1 then Check_Choices : declare Choice : Node_Id; -- Location of choice for messages Hi_Val : Uint; Lo_Val : Uint; -- High end of one range and Low end of the next. Should be -- contiguous if there is no hole in the list of values. Lo_Dup : Uint; Hi_Dup : Uint; -- End points of duplicated range Missing_Or_Duplicates : Boolean := False; -- Set True if missing or duplicate choices found procedure Output_Bad_Choices (Lo, Hi : Uint; C : Node_Id); -- Output continuation message with a representation of the -- bounds (just Lo if Lo = Hi, else Lo .. Hi). C is the -- choice node where the message is to be posted. ------------------------ -- Output_Bad_Choices -- ------------------------ procedure Output_Bad_Choices (Lo, Hi : Uint; C : Node_Id) is begin -- Enumeration type case if Is_Enumeration_Type (Index_Typ) then Error_Msg_Name_1 := Chars (Get_Enum_Lit_From_Pos (Index_Typ, Lo, Loc)); Error_Msg_Name_2 := Chars (Get_Enum_Lit_From_Pos (Index_Typ, Hi, Loc)); if Lo = Hi then Error_Msg_N ("\\ %!", C); else Error_Msg_N ("\\ % .. %!", C); end if; -- Integer types case else Error_Msg_Uint_1 := Lo; Error_Msg_Uint_2 := Hi; if Lo = Hi then Error_Msg_N ("\\ ^!", C); else Error_Msg_N ("\\ ^ .. ^!", C); end if; end if; end Output_Bad_Choices; -- Start of processing for Check_Choices begin Sort_Case_Table (Table); -- First we do a quick linear loop to find out if we have -- any duplicates or missing entries (usually we have a -- legal aggregate, so this will get us out quickly). for J in 1 .. Nb_Discrete_Choices - 1 loop Hi_Val := Expr_Value (Table (J).Hi); Lo_Val := Expr_Value (Table (J + 1).Lo); if Lo_Val <= Hi_Val or else (Lo_Val > Hi_Val + 1 and then not Others_Present) then Missing_Or_Duplicates := True; exit; end if; end loop; -- If we have missing or duplicate entries, first fill in -- the Highest entries to make life easier in the following -- loops to detect bad entries. if Missing_Or_Duplicates then Table (1).Highest := Expr_Value (Table (1).Hi); for J in 2 .. Nb_Discrete_Choices loop Table (J).Highest := UI_Max (Table (J - 1).Highest, Expr_Value (Table (J).Hi)); end loop; -- Loop through table entries to find duplicate indexes for J in 2 .. Nb_Discrete_Choices loop Lo_Val := Expr_Value (Table (J).Lo); Hi_Val := Expr_Value (Table (J).Hi); -- Case where we have duplicates (the lower bound of -- this choice is less than or equal to the highest -- high bound found so far). if Lo_Val <= Table (J - 1).Highest then -- We move backwards looking for duplicates. We can -- abandon this loop as soon as we reach a choice -- highest value that is less than Lo_Val. for K in reverse 1 .. J - 1 loop exit when Table (K).Highest < Lo_Val; -- Here we may have duplicates between entries -- for K and J. Get range of duplicates. Lo_Dup := UI_Max (Lo_Val, Expr_Value (Table (K).Lo)); Hi_Dup := UI_Min (Hi_Val, Expr_Value (Table (K).Hi)); -- Nothing to do if duplicate range is null if Lo_Dup > Hi_Dup then null; -- Otherwise place proper message. Because -- of the missing expansion of subtypes with -- predicates in ASIS mode, do not report -- spurious overlap errors. elsif ASIS_Mode and then ((Is_Type (Entity (Table (J).Choice)) and then Has_Predicates (Entity (Table (J).Choice))) or else (Is_Type (Entity (Table (K).Choice)) and then Has_Predicates (Entity (Table (K).Choice)))) then null; else -- We place message on later choice, with a -- line reference to the earlier choice. if Sloc (Table (J).Choice) < Sloc (Table (K).Choice) then Choice := Table (K).Choice; Error_Msg_Sloc := Sloc (Table (J).Choice); else Choice := Table (J).Choice; Error_Msg_Sloc := Sloc (Table (K).Choice); end if; if Lo_Dup = Hi_Dup then Error_Msg_N ("index value in array aggregate " & "duplicates the one given#!", Choice); else Error_Msg_N ("index values in array aggregate " & "duplicate those given#!", Choice); end if; Output_Bad_Choices (Lo_Dup, Hi_Dup, Choice); end if; end loop; end if; end loop; -- Loop through entries in table to find missing indexes. -- Not needed if others, since missing impossible. if not Others_Present then for J in 2 .. Nb_Discrete_Choices loop Lo_Val := Expr_Value (Table (J).Lo); Hi_Val := Table (J - 1).Highest; if Lo_Val > Hi_Val + 1 then declare Error_Node : Node_Id; begin -- If the choice is the bound of a range in -- a subtype indication, it is not in the -- source lists for the aggregate itself, so -- post the error on the aggregate. Otherwise -- post it on choice itself. Choice := Table (J).Choice; if Is_List_Member (Choice) then Error_Node := Choice; else Error_Node := N; end if; if Hi_Val + 1 = Lo_Val - 1 then Error_Msg_N ("missing index value " & "in array aggregate!", Error_Node); else Error_Msg_N ("missing index values " & "in array aggregate!", Error_Node); end if; Output_Bad_Choices (Hi_Val + 1, Lo_Val - 1, Error_Node); end; end if; end loop; end if; -- If either missing or duplicate values, return failure Set_Etype (N, Any_Composite); return Failure; end if; end Check_Choices; end if; -- STEP 2 (B): Compute aggregate bounds and min/max choices values if Nb_Discrete_Choices > 0 then Choices_Low := Table (1).Lo; Choices_High := Table (Nb_Discrete_Choices).Hi; end if; -- If Others is present, then bounds of aggregate come from the -- index constraint (not the choices in the aggregate itself). if Others_Present then Get_Index_Bounds (Index_Constr, Aggr_Low, Aggr_High); -- Abandon processing if either bound is already signalled as -- an error (prevents junk cascaded messages and blow ups). if Nkind (Aggr_Low) = N_Error or else Nkind (Aggr_High) = N_Error then return False; end if; -- No others clause present else -- Special processing if others allowed and not present. This -- means that the bounds of the aggregate come from the index -- constraint (and the length must match). if Others_Allowed then Get_Index_Bounds (Index_Constr, Aggr_Low, Aggr_High); -- Abandon processing if either bound is already signalled -- as an error (stop junk cascaded messages and blow ups). if Nkind (Aggr_Low) = N_Error or else Nkind (Aggr_High) = N_Error then return False; end if; -- If others allowed, and no others present, then the array -- should cover all index values. If it does not, we will -- get a length check warning, but there is two cases where -- an additional warning is useful: -- If we have no positional components, and the length is -- wrong (which we can tell by others being allowed with -- missing components), and the index type is an enumeration -- type, then issue appropriate warnings about these missing -- components. They are only warnings, since the aggregate -- is fine, it's just the wrong length. We skip this check -- for standard character types (since there are no literals -- and it is too much trouble to concoct them), and also if -- any of the bounds have values that are not known at -- compile time. -- Another case warranting a warning is when the length -- is right, but as above we have an index type that is -- an enumeration, and the bounds do not match. This is a -- case where dubious sliding is allowed and we generate a -- warning that the bounds do not match. if No (Expressions (N)) and then Nkind (Index) = N_Range and then Is_Enumeration_Type (Etype (Index)) and then not Is_Standard_Character_Type (Etype (Index)) and then Compile_Time_Known_Value (Aggr_Low) and then Compile_Time_Known_Value (Aggr_High) and then Compile_Time_Known_Value (Choices_Low) and then Compile_Time_Known_Value (Choices_High) then -- If any of the expressions or range bounds in choices -- have semantic errors, then do not attempt further -- resolution, to prevent cascaded errors. if Errors_Posted_On_Choices then return Failure; end if; declare ALo : constant Node_Id := Expr_Value_E (Aggr_Low); AHi : constant Node_Id := Expr_Value_E (Aggr_High); CLo : constant Node_Id := Expr_Value_E (Choices_Low); CHi : constant Node_Id := Expr_Value_E (Choices_High); Ent : Entity_Id; begin -- Warning case 1, missing values at start/end. Only -- do the check if the number of entries is too small. if (Enumeration_Pos (CHi) - Enumeration_Pos (CLo)) < (Enumeration_Pos (AHi) - Enumeration_Pos (ALo)) then Error_Msg_N ("missing index value(s) in array aggregate??", N); -- Output missing value(s) at start if Chars (ALo) /= Chars (CLo) then Ent := Prev (CLo); if Chars (ALo) = Chars (Ent) then Error_Msg_Name_1 := Chars (ALo); Error_Msg_N ("\ %??", N); else Error_Msg_Name_1 := Chars (ALo); Error_Msg_Name_2 := Chars (Ent); Error_Msg_N ("\ % .. %??", N); end if; end if; -- Output missing value(s) at end if Chars (AHi) /= Chars (CHi) then Ent := Next (CHi); if Chars (AHi) = Chars (Ent) then Error_Msg_Name_1 := Chars (Ent); Error_Msg_N ("\ %??", N); else Error_Msg_Name_1 := Chars (Ent); Error_Msg_Name_2 := Chars (AHi); Error_Msg_N ("\ % .. %??", N); end if; end if; -- Warning case 2, dubious sliding. The First_Subtype -- test distinguishes between a constrained type where -- sliding is not allowed (so we will get a warning -- later that Constraint_Error will be raised), and -- the unconstrained case where sliding is permitted. elsif (Enumeration_Pos (CHi) - Enumeration_Pos (CLo)) = (Enumeration_Pos (AHi) - Enumeration_Pos (ALo)) and then Chars (ALo) /= Chars (CLo) and then not Is_Constrained (First_Subtype (Etype (N))) then Error_Msg_N ("bounds of aggregate do not match target??", N); end if; end; end if; end if; -- If no others, aggregate bounds come from aggregate Aggr_Low := Choices_Low; Aggr_High := Choices_High; end if; end Step_2; -- STEP 3: Process positional components else -- STEP 3 (A): Process positional elements Expr := First (Expressions (N)); Nb_Elements := Uint_0; while Present (Expr) loop Nb_Elements := Nb_Elements + 1; -- Ada 2005 (AI-231) if Ada_Version >= Ada_2005 and then Known_Null (Expr) then Check_Can_Never_Be_Null (Etype (N), Expr); end if; if not Resolve_Aggr_Expr (Expr, Single_Elmt => True) then return Failure; end if; -- Check incorrect use of dynamically tagged expression if Is_Tagged_Type (Etype (Expr)) then Check_Dynamically_Tagged_Expression (Expr => Expr, Typ => Component_Type (Etype (N)), Related_Nod => N); end if; Next (Expr); end loop; if Others_Present then Assoc := Last (Component_Associations (N)); -- Ada 2005 (AI-231) if Ada_Version >= Ada_2005 and then Known_Null (Assoc) then Check_Can_Never_Be_Null (Etype (N), Expression (Assoc)); end if; -- Ada 2005 (AI-287): In case of default initialized component, -- we delay the resolution to the expansion phase. if Box_Present (Assoc) then -- Ada 2005 (AI-287): In case of default initialization of a -- component the expander will generate calls to the -- corresponding initialization subprogram. We need to call -- Resolve_Aggr_Expr to check the rules about -- dimensionality. if not Resolve_Aggr_Expr (Assoc, Single_Elmt => False) then return Failure; end if; elsif not Resolve_Aggr_Expr (Expression (Assoc), Single_Elmt => False) then return Failure; -- Check incorrect use of dynamically tagged expression. The -- expression of the others choice has not been resolved yet. -- In order to diagnose the semantic error we create a duplicate -- tree to analyze it and perform the check. else declare Save_Analysis : constant Boolean := Full_Analysis; Expr : constant Node_Id := New_Copy_Tree (Expression (Assoc)); begin Expander_Mode_Save_And_Set (False); Full_Analysis := False; Analyze (Expr); Full_Analysis := Save_Analysis; Expander_Mode_Restore; if Is_Tagged_Type (Etype (Expr)) then Check_Dynamically_Tagged_Expression (Expr => Expr, Typ => Component_Type (Etype (N)), Related_Nod => N); end if; end; end if; end if; -- STEP 3 (B): Compute the aggregate bounds if Others_Present then Get_Index_Bounds (Index_Constr, Aggr_Low, Aggr_High); else if Others_Allowed then Get_Index_Bounds (Index_Constr, Aggr_Low, Discard); else Aggr_Low := Index_Typ_Low; end if; Aggr_High := Add (Nb_Elements - 1, To => Aggr_Low); Check_Bound (Index_Base_High, Aggr_High); end if; end if; -- STEP 4: Perform static aggregate checks and save the bounds -- Check (A) Check_Bounds (Index_Typ_Low, Index_Typ_High, Aggr_Low, Aggr_High); Check_Bounds (Index_Base_Low, Index_Base_High, Aggr_Low, Aggr_High); -- Check (B) if Others_Present and then Nb_Discrete_Choices > 0 then Check_Bounds (Aggr_Low, Aggr_High, Choices_Low, Choices_High); Check_Bounds (Index_Typ_Low, Index_Typ_High, Choices_Low, Choices_High); Check_Bounds (Index_Base_Low, Index_Base_High, Choices_Low, Choices_High); -- Check (C) elsif Others_Present and then Nb_Elements > 0 then Check_Length (Aggr_Low, Aggr_High, Nb_Elements); Check_Length (Index_Typ_Low, Index_Typ_High, Nb_Elements); Check_Length (Index_Base_Low, Index_Base_High, Nb_Elements); end if; if Raises_Constraint_Error (Aggr_Low) or else Raises_Constraint_Error (Aggr_High) then Set_Raises_Constraint_Error (N); end if; Aggr_Low := Duplicate_Subexpr (Aggr_Low); -- Do not duplicate Aggr_High if Aggr_High = Aggr_Low + Nb_Elements -- since the addition node returned by Add is not yet analyzed. Attach -- to tree and analyze first. Reset analyzed flag to ensure it will get -- analyzed when it is a literal bound whose type must be properly set. if Others_Present or else Nb_Discrete_Choices > 0 then Aggr_High := Duplicate_Subexpr (Aggr_High); if Etype (Aggr_High) = Universal_Integer then Set_Analyzed (Aggr_High, False); end if; end if; -- If the aggregate already has bounds attached to it, it means this is -- a positional aggregate created as an optimization by -- Exp_Aggr.Convert_To_Positional, so we don't want to change those -- bounds. if Present (Aggregate_Bounds (N)) and then not Others_Allowed then Aggr_Low := Low_Bound (Aggregate_Bounds (N)); Aggr_High := High_Bound (Aggregate_Bounds (N)); end if; Set_Aggregate_Bounds (N, Make_Range (Loc, Low_Bound => Aggr_Low, High_Bound => Aggr_High)); -- The bounds may contain expressions that must be inserted upwards. -- Attach them fully to the tree. After analysis, remove side effects -- from upper bound, if still needed. Set_Parent (Aggregate_Bounds (N), N); Analyze_And_Resolve (Aggregate_Bounds (N), Index_Typ); Check_Unset_Reference (Aggregate_Bounds (N)); if not Others_Present and then Nb_Discrete_Choices = 0 then Set_High_Bound (Aggregate_Bounds (N), Duplicate_Subexpr (High_Bound (Aggregate_Bounds (N)))); end if; -- Check the dimensions of each component in the array aggregate Analyze_Dimension_Array_Aggregate (N, Component_Typ); return Success; end Resolve_Array_Aggregate; ----------------------------- -- Resolve_Delta_Aggregate -- ----------------------------- procedure Resolve_Delta_Aggregate (N : Node_Id; Typ : Entity_Id) is Base : constant Node_Id := Expression (N); begin if not Is_Composite_Type (Typ) then Error_Msg_N ("not a composite type", N); end if; Analyze_And_Resolve (Base, Typ); if Is_Array_Type (Typ) then Resolve_Delta_Array_Aggregate (N, Typ); else Resolve_Delta_Record_Aggregate (N, Typ); end if; Set_Etype (N, Typ); end Resolve_Delta_Aggregate; ----------------------------------- -- Resolve_Delta_Array_Aggregate -- ----------------------------------- procedure Resolve_Delta_Array_Aggregate (N : Node_Id; Typ : Entity_Id) is Deltas : constant List_Id := Component_Associations (N); Assoc : Node_Id; Choice : Node_Id; Index_Type : Entity_Id; begin Index_Type := Etype (First_Index (Typ)); Assoc := First (Deltas); while Present (Assoc) loop if Nkind (Assoc) = N_Iterated_Component_Association then Choice := First (Choice_List (Assoc)); while Present (Choice) loop if Nkind (Choice) = N_Others_Choice then Error_Msg_N ("others not allowed in delta aggregate", Choice); else Analyze_And_Resolve (Choice, Index_Type); end if; Next (Choice); end loop; declare Id : constant Entity_Id := Defining_Identifier (Assoc); Ent : constant Entity_Id := New_Internal_Entity (E_Loop, Current_Scope, Sloc (Assoc), 'L'); begin Set_Etype (Ent, Standard_Void_Type); Set_Parent (Ent, Assoc); if No (Scope (Id)) then Enter_Name (Id); Set_Etype (Id, Index_Type); Set_Ekind (Id, E_Variable); Set_Scope (Id, Ent); end if; Push_Scope (Ent); Analyze_And_Resolve (New_Copy_Tree (Expression (Assoc)), Component_Type (Typ)); End_Scope; end; else Choice := First (Choice_List (Assoc)); while Present (Choice) loop if Nkind (Choice) = N_Others_Choice then Error_Msg_N ("others not allowed in delta aggregate", Choice); else Analyze (Choice); if Is_Entity_Name (Choice) and then Is_Type (Entity (Choice)) then -- Choice covers a range of values if Base_Type (Entity (Choice)) /= Base_Type (Index_Type) then Error_Msg_NE ("choice does mat match index type of", Choice, Typ); end if; else Resolve (Choice, Index_Type); end if; end if; Next (Choice); end loop; Analyze_And_Resolve (Expression (Assoc), Component_Type (Typ)); end if; Next (Assoc); end loop; end Resolve_Delta_Array_Aggregate; ------------------------------------ -- Resolve_Delta_Record_Aggregate -- ------------------------------------ procedure Resolve_Delta_Record_Aggregate (N : Node_Id; Typ : Entity_Id) is -- Variables used to verify that discriminant-dependent components -- appear in the same variant. Comp_Ref : Entity_Id := Empty; -- init to avoid warning Variant : Node_Id; procedure Check_Variant (Id : Entity_Id); -- If a given component of the delta aggregate appears in a variant -- part, verify that it is within the same variant as that of previous -- specified variant components of the delta. function Get_Component_Type (Nam : Node_Id) return Entity_Id; -- Locate component with a given name and return its type. If none found -- report error. function Nested_In (V1 : Node_Id; V2 : Node_Id) return Boolean; -- Determine whether variant V1 is within variant V2 function Variant_Depth (N : Node_Id) return Integer; -- Determine the distance of a variant to the enclosing type -- declaration. -------------------- -- Check_Variant -- -------------------- procedure Check_Variant (Id : Entity_Id) is Comp : Entity_Id; Comp_Variant : Node_Id; begin if not Has_Discriminants (Typ) then return; end if; Comp := First_Entity (Typ); while Present (Comp) loop exit when Chars (Comp) = Chars (Id); Next_Component (Comp); end loop; -- Find the variant, if any, whose component list includes the -- component declaration. Comp_Variant := Parent (Parent (List_Containing (Parent (Comp)))); if Nkind (Comp_Variant) = N_Variant then if No (Variant) then Variant := Comp_Variant; Comp_Ref := Comp; elsif Variant /= Comp_Variant then declare D1 : constant Integer := Variant_Depth (Variant); D2 : constant Integer := Variant_Depth (Comp_Variant); begin if D1 = D2 or else (D1 > D2 and then not Nested_In (Variant, Comp_Variant)) or else (D2 > D1 and then not Nested_In (Comp_Variant, Variant)) then pragma Assert (Present (Comp_Ref)); Error_Msg_Node_2 := Comp_Ref; Error_Msg_NE ("& and & appear in different variants", Id, Comp); -- Otherwise retain the deeper variant for subsequent tests elsif D2 > D1 then Variant := Comp_Variant; end if; end; end if; end if; end Check_Variant; ------------------------ -- Get_Component_Type -- ------------------------ function Get_Component_Type (Nam : Node_Id) return Entity_Id is Comp : Entity_Id; begin Comp := First_Entity (Typ); while Present (Comp) loop if Chars (Comp) = Chars (Nam) then if Ekind (Comp) = E_Discriminant then Error_Msg_N ("delta cannot apply to discriminant", Nam); end if; return Etype (Comp); end if; Comp := Next_Entity (Comp); end loop; Error_Msg_NE ("type& has no component with this name", Nam, Typ); return Any_Type; end Get_Component_Type; --------------- -- Nested_In -- --------------- function Nested_In (V1, V2 : Node_Id) return Boolean is Par : Node_Id; begin Par := Parent (V1); while Nkind (Par) /= N_Full_Type_Declaration loop if Par = V2 then return True; end if; Par := Parent (Par); end loop; return False; end Nested_In; ------------------- -- Variant_Depth -- ------------------- function Variant_Depth (N : Node_Id) return Integer is Depth : Integer; Par : Node_Id; begin Depth := 0; Par := Parent (N); while Nkind (Par) /= N_Full_Type_Declaration loop Depth := Depth + 1; Par := Parent (Par); end loop; return Depth; end Variant_Depth; -- Local variables Deltas : constant List_Id := Component_Associations (N); Assoc : Node_Id; Choice : Node_Id; Comp_Type : Entity_Id := Empty; -- init to avoid warning -- Start of processing for Resolve_Delta_Record_Aggregate begin Variant := Empty; Assoc := First (Deltas); while Present (Assoc) loop Choice := First (Choice_List (Assoc)); while Present (Choice) loop Comp_Type := Get_Component_Type (Choice); if Comp_Type /= Any_Type then Check_Variant (Choice); end if; Next (Choice); end loop; pragma Assert (Present (Comp_Type)); Analyze_And_Resolve (Expression (Assoc), Comp_Type); Next (Assoc); end loop; end Resolve_Delta_Record_Aggregate; --------------------------------- -- Resolve_Extension_Aggregate -- --------------------------------- -- There are two cases to consider: -- a) If the ancestor part is a type mark, the components needed are the -- difference between the components of the expected type and the -- components of the given type mark. -- b) If the ancestor part is an expression, it must be unambiguous, and -- once we have its type we can also compute the needed components as in -- the previous case. In both cases, if the ancestor type is not the -- immediate ancestor, we have to build this ancestor recursively. -- In both cases, discriminants of the ancestor type do not play a role in -- the resolution of the needed components, because inherited discriminants -- cannot be used in a type extension. As a result we can compute -- independently the list of components of the ancestor type and of the -- expected type. procedure Resolve_Extension_Aggregate (N : Node_Id; Typ : Entity_Id) is A : constant Node_Id := Ancestor_Part (N); A_Type : Entity_Id; I : Interp_Index; It : Interp; function Valid_Limited_Ancestor (Anc : Node_Id) return Boolean; -- If the type is limited, verify that the ancestor part is a legal -- expression (aggregate or function call, including 'Input)) that does -- not require a copy, as specified in 7.5(2). function Valid_Ancestor_Type return Boolean; -- Verify that the type of the ancestor part is a non-private ancestor -- of the expected type, which must be a type extension. procedure Transform_BIP_Assignment (Typ : Entity_Id); -- For an extension aggregate whose ancestor part is a build-in-place -- call returning a nonlimited type, this is used to transform the -- assignment to the ancestor part to use a temp. ---------------------------- -- Valid_Limited_Ancestor -- ---------------------------- function Valid_Limited_Ancestor (Anc : Node_Id) return Boolean is begin if Is_Entity_Name (Anc) and then Is_Type (Entity (Anc)) then return True; -- The ancestor must be a call or an aggregate, but a call may -- have been expanded into a temporary, so check original node. elsif Nkind_In (Anc, N_Aggregate, N_Extension_Aggregate, N_Function_Call) then return True; elsif Nkind (Original_Node (Anc)) = N_Function_Call then return True; elsif Nkind (Anc) = N_Attribute_Reference and then Attribute_Name (Anc) = Name_Input then return True; elsif Nkind (Anc) = N_Qualified_Expression then return Valid_Limited_Ancestor (Expression (Anc)); else return False; end if; end Valid_Limited_Ancestor; ------------------------- -- Valid_Ancestor_Type -- ------------------------- function Valid_Ancestor_Type return Boolean is Imm_Type : Entity_Id; begin Imm_Type := Base_Type (Typ); while Is_Derived_Type (Imm_Type) loop if Etype (Imm_Type) = Base_Type (A_Type) then return True; -- The base type of the parent type may appear as a private -- extension if it is declared as such in a parent unit of the -- current one. For consistency of the subsequent analysis use -- the partial view for the ancestor part. elsif Is_Private_Type (Etype (Imm_Type)) and then Present (Full_View (Etype (Imm_Type))) and then Base_Type (A_Type) = Full_View (Etype (Imm_Type)) then A_Type := Etype (Imm_Type); return True; -- The parent type may be a private extension. The aggregate is -- legal if the type of the aggregate is an extension of it that -- is not a private extension. elsif Is_Private_Type (A_Type) and then not Is_Private_Type (Imm_Type) and then Present (Full_View (A_Type)) and then Base_Type (Full_View (A_Type)) = Etype (Imm_Type) then return True; else Imm_Type := Etype (Base_Type (Imm_Type)); end if; end loop; -- If previous loop did not find a proper ancestor, report error Error_Msg_NE ("expect ancestor type of &", A, Typ); return False; end Valid_Ancestor_Type; ------------------------------ -- Transform_BIP_Assignment -- ------------------------------ procedure Transform_BIP_Assignment (Typ : Entity_Id) is Loc : constant Source_Ptr := Sloc (N); Def_Id : constant Entity_Id := Make_Temporary (Loc, 'Y', A); Obj_Decl : constant Node_Id := Make_Object_Declaration (Loc, Defining_Identifier => Def_Id, Constant_Present => True, Object_Definition => New_Occurrence_Of (Typ, Loc), Expression => A, Has_Init_Expression => True); begin Set_Etype (Def_Id, Typ); Set_Ancestor_Part (N, New_Occurrence_Of (Def_Id, Loc)); Insert_Action (N, Obj_Decl); end Transform_BIP_Assignment; -- Start of processing for Resolve_Extension_Aggregate begin -- Analyze the ancestor part and account for the case where it is a -- parameterless function call. Analyze (A); Check_Parameterless_Call (A); -- In SPARK, the ancestor part cannot be a type mark if Is_Entity_Name (A) and then Is_Type (Entity (A)) then Check_SPARK_05_Restriction ("ancestor part cannot be a type mark", A); -- AI05-0115: if the ancestor part is a subtype mark, the ancestor -- must not have unknown discriminants. if Has_Unknown_Discriminants (Root_Type (Typ)) then Error_Msg_NE ("aggregate not available for type& whose ancestor " & "has unknown discriminants", N, Typ); end if; end if; if not Is_Tagged_Type (Typ) then Error_Msg_N ("type of extension aggregate must be tagged", N); return; elsif Is_Limited_Type (Typ) then -- Ada 2005 (AI-287): Limited aggregates are allowed if Ada_Version < Ada_2005 then Error_Msg_N ("aggregate type cannot be limited", N); Explain_Limited_Type (Typ, N); return; elsif Valid_Limited_Ancestor (A) then null; else Error_Msg_N ("limited ancestor part must be aggregate or function call", A); end if; elsif Is_Class_Wide_Type (Typ) then Error_Msg_N ("aggregate cannot be of a class-wide type", N); return; end if; if Is_Entity_Name (A) and then Is_Type (Entity (A)) then A_Type := Get_Full_View (Entity (A)); if Valid_Ancestor_Type then Set_Entity (A, A_Type); Set_Etype (A, A_Type); Validate_Ancestor_Part (N); Resolve_Record_Aggregate (N, Typ); end if; elsif Nkind (A) /= N_Aggregate then if Is_Overloaded (A) then A_Type := Any_Type; Get_First_Interp (A, I, It); while Present (It.Typ) loop -- Consider limited interpretations if Ada 2005 or higher if Is_Tagged_Type (It.Typ) and then (Ada_Version >= Ada_2005 or else not Is_Limited_Type (It.Typ)) then if A_Type /= Any_Type then Error_Msg_N ("cannot resolve expression", A); return; else A_Type := It.Typ; end if; end if; Get_Next_Interp (I, It); end loop; if A_Type = Any_Type then if Ada_Version >= Ada_2005 then Error_Msg_N ("ancestor part must be of a tagged type", A); else Error_Msg_N ("ancestor part must be of a nonlimited tagged type", A); end if; return; end if; else A_Type := Etype (A); end if; if Valid_Ancestor_Type then Resolve (A, A_Type); Check_Unset_Reference (A); Check_Non_Static_Context (A); -- The aggregate is illegal if the ancestor expression is a call -- to a function with a limited unconstrained result, unless the -- type of the aggregate is a null extension. This restriction -- was added in AI05-67 to simplify implementation. if Nkind (A) = N_Function_Call and then Is_Limited_Type (A_Type) and then not Is_Null_Extension (Typ) and then not Is_Constrained (A_Type) then Error_Msg_N ("type of limited ancestor part must be constrained", A); -- Reject the use of CPP constructors that leave objects partially -- initialized. For example: -- type CPP_Root is tagged limited record ... -- pragma Import (CPP, CPP_Root); -- type CPP_DT is new CPP_Root and Iface ... -- pragma Import (CPP, CPP_DT); -- type Ada_DT is new CPP_DT with ... -- Obj : Ada_DT := Ada_DT'(New_CPP_Root with others => <>); -- Using the constructor of CPP_Root the slots of the dispatch -- table of CPP_DT cannot be set, and the secondary tag of -- CPP_DT is unknown. elsif Nkind (A) = N_Function_Call and then Is_CPP_Constructor_Call (A) and then Enclosing_CPP_Parent (Typ) /= A_Type then Error_Msg_NE ("??must use 'C'P'P constructor for type &", A, Enclosing_CPP_Parent (Typ)); -- The following call is not needed if the previous warning -- is promoted to an error. Resolve_Record_Aggregate (N, Typ); elsif Is_Class_Wide_Type (Etype (A)) and then Nkind (Original_Node (A)) = N_Function_Call then -- If the ancestor part is a dispatching call, it appears -- statically to be a legal ancestor, but it yields any member -- of the class, and it is not possible to determine whether -- it is an ancestor of the extension aggregate (much less -- which ancestor). It is not possible to determine the -- components of the extension part. -- This check implements AI-306, which in fact was motivated by -- an AdaCore query to the ARG after this test was added. Error_Msg_N ("ancestor part must be statically tagged", A); else -- We are using the build-in-place protocol, but we can't build -- in place, because we need to call the function before -- allocating the aggregate. Could do better for null -- extensions, and maybe for nondiscriminated types. -- This is wrong for limited, but those were wrong already. if not Is_Limited_View (A_Type) and then Is_Build_In_Place_Function_Call (A) then Transform_BIP_Assignment (A_Type); end if; Resolve_Record_Aggregate (N, Typ); end if; end if; else Error_Msg_N ("no unique type for this aggregate", A); end if; Check_Function_Writable_Actuals (N); end Resolve_Extension_Aggregate; ------------------------------ -- Resolve_Record_Aggregate -- ------------------------------ procedure Resolve_Record_Aggregate (N : Node_Id; Typ : Entity_Id) is New_Assoc_List : constant List_Id := New_List; -- New_Assoc_List is the newly built list of N_Component_Association -- nodes. Others_Etype : Entity_Id := Empty; -- This variable is used to save the Etype of the last record component -- that takes its value from the others choice. Its purpose is: -- -- (a) make sure the others choice is useful -- -- (b) make sure the type of all the components whose value is -- subsumed by the others choice are the same. -- -- This variable is updated as a side effect of function Get_Value. Box_Node : Node_Id := Empty; Is_Box_Present : Boolean := False; Others_Box : Integer := 0; -- Ada 2005 (AI-287): Variables used in case of default initialization -- to provide a functionality similar to Others_Etype. Box_Present -- indicates that the component takes its default initialization; -- Others_Box counts the number of components of the current aggregate -- (which may be a sub-aggregate of a larger one) that are default- -- initialized. A value of One indicates that an others_box is present. -- Any larger value indicates that the others_box is not redundant. -- These variables, similar to Others_Etype, are also updated as a side -- effect of function Get_Value. Box_Node is used to place a warning on -- a redundant others_box. procedure Add_Association (Component : Entity_Id; Expr : Node_Id; Assoc_List : List_Id; Is_Box_Present : Boolean := False); -- Builds a new N_Component_Association node which associates Component -- to expression Expr and adds it to the association list being built, -- either New_Assoc_List, or the association being built for an inner -- aggregate. procedure Add_Discriminant_Values (New_Aggr : Node_Id; Assoc_List : List_Id); -- The constraint to a component may be given by a discriminant of the -- enclosing type, in which case we have to retrieve its value, which is -- part of the enclosing aggregate. Assoc_List provides the discriminant -- associations of the current type or of some enclosing record. function Discriminant_Present (Input_Discr : Entity_Id) return Boolean; -- If aggregate N is a regular aggregate this routine will return True. -- Otherwise, if N is an extension aggregate, then Input_Discr denotes -- a discriminant whose value may already have been specified by N's -- ancestor part. This routine checks whether this is indeed the case -- and if so returns False, signaling that no value for Input_Discr -- should appear in N's aggregate part. Also, in this case, the routine -- appends to New_Assoc_List the discriminant value specified in the -- ancestor part. -- -- If the aggregate is in a context with expansion delayed, it will be -- reanalyzed. The inherited discriminant values must not be reinserted -- in the component list to prevent spurious errors, but they must be -- present on first analysis to build the proper subtype indications. -- The flag Inherited_Discriminant is used to prevent the re-insertion. function Find_Private_Ancestor (Typ : Entity_Id) return Entity_Id; -- AI05-0115: Find earlier ancestor in the derivation chain that is -- derived from private view Typ. Whether the aggregate is legal depends -- on the current visibility of the type as well as that of the parent -- of the ancestor. function Get_Value (Compon : Node_Id; From : List_Id; Consider_Others_Choice : Boolean := False) return Node_Id; -- Given a record component stored in parameter Compon, this function -- returns its value as it appears in the list From, which is a list -- of N_Component_Association nodes. -- -- If no component association has a choice for the searched component, -- the value provided by the others choice is returned, if there is one, -- and Consider_Others_Choice is set to true. Otherwise Empty is -- returned. If there is more than one component association giving a -- value for the searched record component, an error message is emitted -- and the first found value is returned. -- -- If Consider_Others_Choice is set and the returned expression comes -- from the others choice, then Others_Etype is set as a side effect. -- An error message is emitted if the components taking their value from -- the others choice do not have same type. procedure Propagate_Discriminants (Aggr : Node_Id; Assoc_List : List_Id); -- Nested components may themselves be discriminated types constrained -- by outer discriminants, whose values must be captured before the -- aggregate is expanded into assignments. procedure Resolve_Aggr_Expr (Expr : Node_Id; Component : Entity_Id); -- Analyzes and resolves expression Expr against the Etype of the -- Component. This routine also applies all appropriate checks to Expr. -- It finally saves a Expr in the newly created association list that -- will be attached to the final record aggregate. Note that if the -- Parent pointer of Expr is not set then Expr was produced with a -- New_Copy_Tree or some such. procedure Rewrite_Range (Root_Type : Entity_Id; Rge : Node_Id); -- Rewrite a range node Rge when its bounds refer to non-stored -- discriminants from Root_Type, to replace them with the stored -- discriminant values. This is required in GNATprove mode, and is -- adopted in all modes to avoid special-casing GNATprove mode. --------------------- -- Add_Association -- --------------------- procedure Add_Association (Component : Entity_Id; Expr : Node_Id; Assoc_List : List_Id; Is_Box_Present : Boolean := False) is Choice_List : constant List_Id := New_List; Loc : Source_Ptr; begin -- If this is a box association the expression is missing, so use the -- Sloc of the aggregate itself for the new association. if Present (Expr) then Loc := Sloc (Expr); else Loc := Sloc (N); end if; Append_To (Choice_List, New_Occurrence_Of (Component, Loc)); Append_To (Assoc_List, Make_Component_Association (Loc, Choices => Choice_List, Expression => Expr, Box_Present => Is_Box_Present)); end Add_Association; ----------------------------- -- Add_Discriminant_Values -- ----------------------------- procedure Add_Discriminant_Values (New_Aggr : Node_Id; Assoc_List : List_Id) is Assoc : Node_Id; Discr : Entity_Id; Discr_Elmt : Elmt_Id; Discr_Val : Node_Id; Val : Entity_Id; begin Discr := First_Discriminant (Etype (New_Aggr)); Discr_Elmt := First_Elmt (Discriminant_Constraint (Etype (New_Aggr))); while Present (Discr_Elmt) loop Discr_Val := Node (Discr_Elmt); -- If the constraint is given by a discriminant then it is a -- discriminant of an enclosing record, and its value has already -- been placed in the association list. if Is_Entity_Name (Discr_Val) and then Ekind (Entity (Discr_Val)) = E_Discriminant then Val := Entity (Discr_Val); Assoc := First (Assoc_List); while Present (Assoc) loop if Present (Entity (First (Choices (Assoc)))) and then Entity (First (Choices (Assoc))) = Val then Discr_Val := Expression (Assoc); exit; end if; Next (Assoc); end loop; end if; Add_Association (Discr, New_Copy_Tree (Discr_Val), Component_Associations (New_Aggr)); -- If the discriminant constraint is a current instance, mark the -- current aggregate so that the self-reference can be expanded -- later. The constraint may refer to the subtype of aggregate, so -- use base type for comparison. if Nkind (Discr_Val) = N_Attribute_Reference and then Is_Entity_Name (Prefix (Discr_Val)) and then Is_Type (Entity (Prefix (Discr_Val))) and then Base_Type (Etype (N)) = Entity (Prefix (Discr_Val)) then Set_Has_Self_Reference (N); end if; Next_Elmt (Discr_Elmt); Next_Discriminant (Discr); end loop; end Add_Discriminant_Values; -------------------------- -- Discriminant_Present -- -------------------------- function Discriminant_Present (Input_Discr : Entity_Id) return Boolean is Regular_Aggr : constant Boolean := Nkind (N) /= N_Extension_Aggregate; Ancestor_Is_Subtyp : Boolean; Loc : Source_Ptr; Ancestor : Node_Id; Ancestor_Typ : Entity_Id; Comp_Assoc : Node_Id; Discr : Entity_Id; Discr_Expr : Node_Id; Discr_Val : Elmt_Id := No_Elmt; Orig_Discr : Entity_Id; begin if Regular_Aggr then return True; end if; -- Check whether inherited discriminant values have already been -- inserted in the aggregate. This will be the case if we are -- re-analyzing an aggregate whose expansion was delayed. if Present (Component_Associations (N)) then Comp_Assoc := First (Component_Associations (N)); while Present (Comp_Assoc) loop if Inherited_Discriminant (Comp_Assoc) then return True; end if; Next (Comp_Assoc); end loop; end if; Ancestor := Ancestor_Part (N); Ancestor_Typ := Etype (Ancestor); Loc := Sloc (Ancestor); -- For a private type with unknown discriminants, use the underlying -- record view if it is available. if Has_Unknown_Discriminants (Ancestor_Typ) and then Present (Full_View (Ancestor_Typ)) and then Present (Underlying_Record_View (Full_View (Ancestor_Typ))) then Ancestor_Typ := Underlying_Record_View (Full_View (Ancestor_Typ)); end if; Ancestor_Is_Subtyp := Is_Entity_Name (Ancestor) and then Is_Type (Entity (Ancestor)); -- If the ancestor part has no discriminants clearly N's aggregate -- part must provide a value for Discr. if not Has_Discriminants (Ancestor_Typ) then return True; -- If the ancestor part is an unconstrained subtype mark then the -- Discr must be present in N's aggregate part. elsif Ancestor_Is_Subtyp and then not Is_Constrained (Entity (Ancestor)) then return True; end if; -- Now look to see if Discr was specified in the ancestor part if Ancestor_Is_Subtyp then Discr_Val := First_Elmt (Discriminant_Constraint (Entity (Ancestor))); end if; Orig_Discr := Original_Record_Component (Input_Discr); Discr := First_Discriminant (Ancestor_Typ); while Present (Discr) loop -- If Ancestor has already specified Disc value then insert its -- value in the final aggregate. if Original_Record_Component (Discr) = Orig_Discr then if Ancestor_Is_Subtyp then Discr_Expr := New_Copy_Tree (Node (Discr_Val)); else Discr_Expr := Make_Selected_Component (Loc, Prefix => Duplicate_Subexpr (Ancestor), Selector_Name => New_Occurrence_Of (Input_Discr, Loc)); end if; Resolve_Aggr_Expr (Discr_Expr, Input_Discr); Set_Inherited_Discriminant (Last (New_Assoc_List)); return False; end if; Next_Discriminant (Discr); if Ancestor_Is_Subtyp then Next_Elmt (Discr_Val); end if; end loop; return True; end Discriminant_Present; --------------------------- -- Find_Private_Ancestor -- --------------------------- function Find_Private_Ancestor (Typ : Entity_Id) return Entity_Id is Par : Entity_Id; begin Par := Typ; loop if Has_Private_Ancestor (Par) and then not Has_Private_Ancestor (Etype (Base_Type (Par))) then return Par; elsif not Is_Derived_Type (Par) then return Empty; else Par := Etype (Base_Type (Par)); end if; end loop; end Find_Private_Ancestor; --------------- -- Get_Value -- --------------- function Get_Value (Compon : Node_Id; From : List_Id; Consider_Others_Choice : Boolean := False) return Node_Id is Typ : constant Entity_Id := Etype (Compon); Assoc : Node_Id; Expr : Node_Id := Empty; Selector_Name : Node_Id; begin Is_Box_Present := False; if No (From) then return Empty; end if; Assoc := First (From); while Present (Assoc) loop Selector_Name := First (Choices (Assoc)); while Present (Selector_Name) loop if Nkind (Selector_Name) = N_Others_Choice then if Consider_Others_Choice and then No (Expr) then -- We need to duplicate the expression for each -- successive component covered by the others choice. -- This is redundant if the others_choice covers only -- one component (small optimization possible???), but -- indispensable otherwise, because each one must be -- expanded individually to preserve side effects. -- Ada 2005 (AI-287): In case of default initialization -- of components, we duplicate the corresponding default -- expression (from the record type declaration). The -- copy must carry the sloc of the association (not the -- original expression) to prevent spurious elaboration -- checks when the default includes function calls. if Box_Present (Assoc) then Others_Box := Others_Box + 1; Is_Box_Present := True; if Expander_Active then return New_Copy_Tree_And_Copy_Dimensions (Expression (Parent (Compon)), New_Sloc => Sloc (Assoc)); else return Expression (Parent (Compon)); end if; else if Present (Others_Etype) and then Base_Type (Others_Etype) /= Base_Type (Typ) then -- If the components are of an anonymous access -- type they are distinct, but this is legal in -- Ada 2012 as long as designated types match. if (Ekind (Typ) = E_Anonymous_Access_Type or else Ekind (Typ) = E_Anonymous_Access_Subprogram_Type) and then Designated_Type (Typ) = Designated_Type (Others_Etype) then null; else Error_Msg_N ("components in OTHERS choice must have same " & "type", Selector_Name); end if; end if; Others_Etype := Typ; -- Copy the expression so that it is resolved -- independently for each component, This is needed -- for accessibility checks on compoents of anonymous -- access types, even in compile_only mode. if not Inside_A_Generic then -- In ASIS mode, preanalyze the expression in an -- others association before making copies for -- separate resolution and accessibility checks. -- This ensures that the type of the expression is -- available to ASIS in all cases, in particular if -- the expression is itself an aggregate. if ASIS_Mode then Preanalyze_And_Resolve (Expression (Assoc), Typ); end if; return New_Copy_Tree_And_Copy_Dimensions (Expression (Assoc)); else return Expression (Assoc); end if; end if; end if; elsif Chars (Compon) = Chars (Selector_Name) then if No (Expr) then -- Ada 2005 (AI-231) if Ada_Version >= Ada_2005 and then Known_Null (Expression (Assoc)) then Check_Can_Never_Be_Null (Compon, Expression (Assoc)); end if; -- We need to duplicate the expression when several -- components are grouped together with a "|" choice. -- For instance "filed1 | filed2 => Expr" -- Ada 2005 (AI-287) if Box_Present (Assoc) then Is_Box_Present := True; -- Duplicate the default expression of the component -- from the record type declaration, so a new copy -- can be attached to the association. -- Note that we always copy the default expression, -- even when the association has a single choice, in -- order to create a proper association for the -- expanded aggregate. -- Component may have no default, in which case the -- expression is empty and the component is default- -- initialized, but an association for the component -- exists, and it is not covered by an others clause. -- Scalar and private types have no initialization -- procedure, so they remain uninitialized. If the -- target of the aggregate is a constant this -- deserves a warning. if No (Expression (Parent (Compon))) and then not Has_Non_Null_Base_Init_Proc (Typ) and then not Has_Aspect (Typ, Aspect_Default_Value) and then not Is_Concurrent_Type (Typ) and then Nkind (Parent (N)) = N_Object_Declaration and then Constant_Present (Parent (N)) then Error_Msg_Node_2 := Typ; Error_Msg_NE ("component&? of type& is uninitialized", Assoc, Selector_Name); -- An additional reminder if the component type -- is a generic formal. if Is_Generic_Type (Base_Type (Typ)) then Error_Msg_NE ("\instance should provide actual type with " & "initialization for&", Assoc, Typ); end if; end if; return New_Copy_Tree_And_Copy_Dimensions (Expression (Parent (Compon))); else if Present (Next (Selector_Name)) then Expr := New_Copy_Tree_And_Copy_Dimensions (Expression (Assoc)); else Expr := Expression (Assoc); end if; end if; Generate_Reference (Compon, Selector_Name, 'm'); else Error_Msg_NE ("more than one value supplied for &", Selector_Name, Compon); end if; end if; Next (Selector_Name); end loop; Next (Assoc); end loop; return Expr; end Get_Value; ----------------------------- -- Propagate_Discriminants -- ----------------------------- procedure Propagate_Discriminants (Aggr : Node_Id; Assoc_List : List_Id) is Loc : constant Source_Ptr := Sloc (N); Needs_Box : Boolean := False; procedure Process_Component (Comp : Entity_Id); -- Add one component with a box association to the inner aggregate, -- and recurse if component is itself composite. ----------------------- -- Process_Component -- ----------------------- procedure Process_Component (Comp : Entity_Id) is T : constant Entity_Id := Etype (Comp); New_Aggr : Node_Id; begin if Is_Record_Type (T) and then Has_Discriminants (T) then New_Aggr := Make_Aggregate (Loc, New_List, New_List); Set_Etype (New_Aggr, T); Add_Association (Comp, New_Aggr, Component_Associations (Aggr)); -- Collect discriminant values and recurse Add_Discriminant_Values (New_Aggr, Assoc_List); Propagate_Discriminants (New_Aggr, Assoc_List); else Needs_Box := True; end if; end Process_Component; -- Local variables Aggr_Type : constant Entity_Id := Base_Type (Etype (Aggr)); Components : constant Elist_Id := New_Elmt_List; Def_Node : constant Node_Id := Type_Definition (Declaration_Node (Aggr_Type)); Comp : Node_Id; Comp_Elmt : Elmt_Id; Errors : Boolean; -- Start of processing for Propagate_Discriminants begin -- The component type may be a variant type. Collect the components -- that are ruled by the known values of the discriminants. Their -- values have already been inserted into the component list of the -- current aggregate. if Nkind (Def_Node) = N_Record_Definition and then Present (Component_List (Def_Node)) and then Present (Variant_Part (Component_List (Def_Node))) then Gather_Components (Aggr_Type, Component_List (Def_Node), Governed_By => Component_Associations (Aggr), Into => Components, Report_Errors => Errors); Comp_Elmt := First_Elmt (Components); while Present (Comp_Elmt) loop if Ekind (Node (Comp_Elmt)) /= E_Discriminant then Process_Component (Node (Comp_Elmt)); end if; Next_Elmt (Comp_Elmt); end loop; -- No variant part, iterate over all components else Comp := First_Component (Etype (Aggr)); while Present (Comp) loop Process_Component (Comp); Next_Component (Comp); end loop; end if; if Needs_Box then Append_To (Component_Associations (Aggr), Make_Component_Association (Loc, Choices => New_List (Make_Others_Choice (Loc)), Expression => Empty, Box_Present => True)); end if; end Propagate_Discriminants; ----------------------- -- Resolve_Aggr_Expr -- ----------------------- procedure Resolve_Aggr_Expr (Expr : Node_Id; Component : Entity_Id) is function Has_Expansion_Delayed (Expr : Node_Id) return Boolean; -- If the expression is an aggregate (possibly qualified) then its -- expansion is delayed until the enclosing aggregate is expanded -- into assignments. In that case, do not generate checks on the -- expression, because they will be generated later, and will other- -- wise force a copy (to remove side effects) that would leave a -- dynamic-sized aggregate in the code, something that gigi cannot -- handle. --------------------------- -- Has_Expansion_Delayed -- --------------------------- function Has_Expansion_Delayed (Expr : Node_Id) return Boolean is begin return (Nkind_In (Expr, N_Aggregate, N_Extension_Aggregate) and then Present (Etype (Expr)) and then Is_Record_Type (Etype (Expr)) and then Expansion_Delayed (Expr)) or else (Nkind (Expr) = N_Qualified_Expression and then Has_Expansion_Delayed (Expression (Expr))); end Has_Expansion_Delayed; -- Local variables Expr_Type : Entity_Id := Empty; New_C : Entity_Id := Component; New_Expr : Node_Id; Relocate : Boolean; -- Set to True if the resolved Expr node needs to be relocated when -- attached to the newly created association list. This node need not -- be relocated if its parent pointer is not set. In fact in this -- case Expr is the output of a New_Copy_Tree call. If Relocate is -- True then we have analyzed the expression node in the original -- aggregate and hence it needs to be relocated when moved over to -- the new association list. -- Start of processing for Resolve_Aggr_Expr begin -- If the type of the component is elementary or the type of the -- aggregate does not contain discriminants, use the type of the -- component to resolve Expr. if Is_Elementary_Type (Etype (Component)) or else not Has_Discriminants (Etype (N)) then Expr_Type := Etype (Component); -- Otherwise we have to pick up the new type of the component from -- the new constrained subtype of the aggregate. In fact components -- which are of a composite type might be constrained by a -- discriminant, and we want to resolve Expr against the subtype were -- all discriminant occurrences are replaced with their actual value. else New_C := First_Component (Etype (N)); while Present (New_C) loop if Chars (New_C) = Chars (Component) then Expr_Type := Etype (New_C); exit; end if; Next_Component (New_C); end loop; pragma Assert (Present (Expr_Type)); -- For each range in an array type where a discriminant has been -- replaced with the constraint, check that this range is within -- the range of the base type. This checks is done in the init -- proc for regular objects, but has to be done here for -- aggregates since no init proc is called for them. if Is_Array_Type (Expr_Type) then declare Index : Node_Id; -- Range of the current constrained index in the array Orig_Index : Node_Id := First_Index (Etype (Component)); -- Range corresponding to the range Index above in the -- original unconstrained record type. The bounds of this -- range may be governed by discriminants. Unconstr_Index : Node_Id := First_Index (Etype (Expr_Type)); -- Range corresponding to the range Index above for the -- unconstrained array type. This range is needed to apply -- range checks. begin Index := First_Index (Expr_Type); while Present (Index) loop if Depends_On_Discriminant (Orig_Index) then Apply_Range_Check (Index, Etype (Unconstr_Index)); end if; Next_Index (Index); Next_Index (Orig_Index); Next_Index (Unconstr_Index); end loop; end; end if; end if; -- If the Parent pointer of Expr is not set, Expr is an expression -- duplicated by New_Tree_Copy (this happens for record aggregates -- that look like (Field1 | Filed2 => Expr) or (others => Expr)). -- Such a duplicated expression must be attached to the tree -- before analysis and resolution to enforce the rule that a tree -- fragment should never be analyzed or resolved unless it is -- attached to the current compilation unit. if No (Parent (Expr)) then Set_Parent (Expr, N); Relocate := False; else Relocate := True; end if; Analyze_And_Resolve (Expr, Expr_Type); Check_Expr_OK_In_Limited_Aggregate (Expr); Check_Non_Static_Context (Expr); Check_Unset_Reference (Expr); -- Check wrong use of class-wide types if Is_Class_Wide_Type (Etype (Expr)) then Error_Msg_N ("dynamically tagged expression not allowed", Expr); end if; if not Has_Expansion_Delayed (Expr) then Aggregate_Constraint_Checks (Expr, Expr_Type); end if; -- If an aggregate component has a type with predicates, an explicit -- predicate check must be applied, as for an assignment statement, -- because the aggegate might not be expanded into individual -- component assignments. if Present (Predicate_Function (Expr_Type)) and then Analyzed (Expr) then Apply_Predicate_Check (Expr, Expr_Type); end if; if Raises_Constraint_Error (Expr) then Set_Raises_Constraint_Error (N); end if; -- If the expression has been marked as requiring a range check, then -- generate it here. It's a bit odd to be generating such checks in -- the analyzer, but harmless since Generate_Range_Check does nothing -- (other than making sure Do_Range_Check is set) if the expander is -- not active. if Do_Range_Check (Expr) then Generate_Range_Check (Expr, Expr_Type, CE_Range_Check_Failed); end if; -- Add association Component => Expr if the caller requests it if Relocate then New_Expr := Relocate_Node (Expr); -- Since New_Expr is not gonna be analyzed later on, we need to -- propagate here the dimensions form Expr to New_Expr. Copy_Dimensions (Expr, New_Expr); else New_Expr := Expr; end if; Add_Association (New_C, New_Expr, New_Assoc_List); end Resolve_Aggr_Expr; ------------------- -- Rewrite_Range -- ------------------- procedure Rewrite_Range (Root_Type : Entity_Id; Rge : Node_Id) is procedure Rewrite_Bound (Bound : Node_Id; Disc : Entity_Id; Expr_Disc : Node_Id); -- Rewrite a bound of the range Bound, when it is equal to the -- non-stored discriminant Disc, into the stored discriminant -- value Expr_Disc. ------------------- -- Rewrite_Bound -- ------------------- procedure Rewrite_Bound (Bound : Node_Id; Disc : Entity_Id; Expr_Disc : Node_Id) is begin if Nkind (Bound) = N_Identifier and then Entity (Bound) = Disc then Rewrite (Bound, New_Copy_Tree (Expr_Disc)); end if; end Rewrite_Bound; -- Local variables Low, High : Node_Id; Disc : Entity_Id; Expr_Disc : Elmt_Id; -- Start of processing for Rewrite_Range begin if Has_Discriminants (Root_Type) and then Nkind (Rge) = N_Range then Low := Low_Bound (Rge); High := High_Bound (Rge); Disc := First_Discriminant (Root_Type); Expr_Disc := First_Elmt (Stored_Constraint (Etype (N))); while Present (Disc) loop Rewrite_Bound (Low, Disc, Node (Expr_Disc)); Rewrite_Bound (High, Disc, Node (Expr_Disc)); Next_Discriminant (Disc); Next_Elmt (Expr_Disc); end loop; end if; end Rewrite_Range; -- Local variables Components : constant Elist_Id := New_Elmt_List; -- Components is the list of the record components whose value must be -- provided in the aggregate. This list does include discriminants. Component : Entity_Id; Component_Elmt : Elmt_Id; Expr : Node_Id; Positional_Expr : Node_Id; -- Start of processing for Resolve_Record_Aggregate begin -- A record aggregate is restricted in SPARK: -- Each named association can have only a single choice. -- OTHERS cannot be used. -- Positional and named associations cannot be mixed. if Present (Component_Associations (N)) and then Present (First (Component_Associations (N))) then if Present (Expressions (N)) then Check_SPARK_05_Restriction ("named association cannot follow positional one", First (Choices (First (Component_Associations (N))))); end if; declare Assoc : Node_Id; begin Assoc := First (Component_Associations (N)); while Present (Assoc) loop if Nkind (Assoc) = N_Iterated_Component_Association then Error_Msg_N ("iterated component association can only appear in an " & "array aggregate", N); raise Unrecoverable_Error; else if List_Length (Choices (Assoc)) > 1 then Check_SPARK_05_Restriction ("component association in record aggregate must " & "contain a single choice", Assoc); end if; if Nkind (First (Choices (Assoc))) = N_Others_Choice then Check_SPARK_05_Restriction ("record aggregate cannot contain OTHERS", Assoc); end if; end if; Assoc := Next (Assoc); end loop; end; end if; -- We may end up calling Duplicate_Subexpr on expressions that are -- attached to New_Assoc_List. For this reason we need to attach it -- to the tree by setting its parent pointer to N. This parent point -- will change in STEP 8 below. Set_Parent (New_Assoc_List, N); -- STEP 1: abstract type and null record verification if Is_Abstract_Type (Typ) then Error_Msg_N ("type of aggregate cannot be abstract", N); end if; if No (First_Entity (Typ)) and then Null_Record_Present (N) then Set_Etype (N, Typ); return; elsif Present (First_Entity (Typ)) and then Null_Record_Present (N) and then not Is_Tagged_Type (Typ) then Error_Msg_N ("record aggregate cannot be null", N); return; -- If the type has no components, then the aggregate should either -- have "null record", or in Ada 2005 it could instead have a single -- component association given by "others => <>". For Ada 95 we flag an -- error at this point, but for Ada 2005 we proceed with checking the -- associations below, which will catch the case where it's not an -- aggregate with "others => <>". Note that the legality of a <> -- aggregate for a null record type was established by AI05-016. elsif No (First_Entity (Typ)) and then Ada_Version < Ada_2005 then Error_Msg_N ("record aggregate must be null", N); return; end if; -- STEP 2: Verify aggregate structure Step_2 : declare Assoc : Node_Id; Bad_Aggregate : Boolean := False; Selector_Name : Node_Id; begin if Present (Component_Associations (N)) then Assoc := First (Component_Associations (N)); else Assoc := Empty; end if; while Present (Assoc) loop Selector_Name := First (Choices (Assoc)); while Present (Selector_Name) loop if Nkind (Selector_Name) = N_Identifier then null; elsif Nkind (Selector_Name) = N_Others_Choice then if Selector_Name /= First (Choices (Assoc)) or else Present (Next (Selector_Name)) then Error_Msg_N ("OTHERS must appear alone in a choice list", Selector_Name); return; elsif Present (Next (Assoc)) then Error_Msg_N ("OTHERS must appear last in an aggregate", Selector_Name); return; -- (Ada 2005): If this is an association with a box, -- indicate that the association need not represent -- any component. elsif Box_Present (Assoc) then Others_Box := 1; Box_Node := Assoc; end if; else Error_Msg_N ("selector name should be identifier or OTHERS", Selector_Name); Bad_Aggregate := True; end if; Next (Selector_Name); end loop; Next (Assoc); end loop; if Bad_Aggregate then return; end if; end Step_2; -- STEP 3: Find discriminant Values Step_3 : declare Discrim : Entity_Id; Missing_Discriminants : Boolean := False; begin if Present (Expressions (N)) then Positional_Expr := First (Expressions (N)); else Positional_Expr := Empty; end if; -- AI05-0115: if the ancestor part is a subtype mark, the ancestor -- must not have unknown discriminants. if Is_Derived_Type (Typ) and then Has_Unknown_Discriminants (Root_Type (Typ)) and then Nkind (N) /= N_Extension_Aggregate then Error_Msg_NE ("aggregate not available for type& whose ancestor " & "has unknown discriminants ", N, Typ); end if; if Has_Unknown_Discriminants (Typ) and then Present (Underlying_Record_View (Typ)) then Discrim := First_Discriminant (Underlying_Record_View (Typ)); elsif Has_Discriminants (Typ) then Discrim := First_Discriminant (Typ); else Discrim := Empty; end if; -- First find the discriminant values in the positional components while Present (Discrim) and then Present (Positional_Expr) loop if Discriminant_Present (Discrim) then Resolve_Aggr_Expr (Positional_Expr, Discrim); -- Ada 2005 (AI-231) if Ada_Version >= Ada_2005 and then Known_Null (Positional_Expr) then Check_Can_Never_Be_Null (Discrim, Positional_Expr); end if; Next (Positional_Expr); end if; if Present (Get_Value (Discrim, Component_Associations (N))) then Error_Msg_NE ("more than one value supplied for discriminant&", N, Discrim); end if; Next_Discriminant (Discrim); end loop; -- Find remaining discriminant values if any among named components while Present (Discrim) loop Expr := Get_Value (Discrim, Component_Associations (N), True); if not Discriminant_Present (Discrim) then if Present (Expr) then Error_Msg_NE ("more than one value supplied for discriminant &", N, Discrim); end if; elsif No (Expr) then Error_Msg_NE ("no value supplied for discriminant &", N, Discrim); Missing_Discriminants := True; else Resolve_Aggr_Expr (Expr, Discrim); end if; Next_Discriminant (Discrim); end loop; if Missing_Discriminants then return; end if; -- At this point and until the beginning of STEP 6, New_Assoc_List -- contains only the discriminants and their values. end Step_3; -- STEP 4: Set the Etype of the record aggregate -- ??? This code is pretty much a copy of Sem_Ch3.Build_Subtype. That -- routine should really be exported in sem_util or some such and used -- in sem_ch3 and here rather than have a copy of the code which is a -- maintenance nightmare. -- ??? Performance WARNING. The current implementation creates a new -- itype for all aggregates whose base type is discriminated. This means -- that for record aggregates nested inside an array aggregate we will -- create a new itype for each record aggregate if the array component -- type has discriminants. For large aggregates this may be a problem. -- What should be done in this case is to reuse itypes as much as -- possible. if Has_Discriminants (Typ) or else (Has_Unknown_Discriminants (Typ) and then Present (Underlying_Record_View (Typ))) then Build_Constrained_Itype : declare Constrs : constant List_Id := New_List; Loc : constant Source_Ptr := Sloc (N); Def_Id : Entity_Id; Indic : Node_Id; New_Assoc : Node_Id; Subtyp_Decl : Node_Id; begin New_Assoc := First (New_Assoc_List); while Present (New_Assoc) loop Append_To (Constrs, Duplicate_Subexpr (Expression (New_Assoc))); Next (New_Assoc); end loop; if Has_Unknown_Discriminants (Typ) and then Present (Underlying_Record_View (Typ)) then Indic := Make_Subtype_Indication (Loc, Subtype_Mark => New_Occurrence_Of (Underlying_Record_View (Typ), Loc), Constraint => Make_Index_Or_Discriminant_Constraint (Loc, Constraints => Constrs)); else Indic := Make_Subtype_Indication (Loc, Subtype_Mark => New_Occurrence_Of (Base_Type (Typ), Loc), Constraint => Make_Index_Or_Discriminant_Constraint (Loc, Constraints => Constrs)); end if; Def_Id := Create_Itype (Ekind (Typ), N); Subtyp_Decl := Make_Subtype_Declaration (Loc, Defining_Identifier => Def_Id, Subtype_Indication => Indic); Set_Parent (Subtyp_Decl, Parent (N)); -- Itypes must be analyzed with checks off (see itypes.ads) Analyze (Subtyp_Decl, Suppress => All_Checks); Set_Etype (N, Def_Id); Check_Static_Discriminated_Subtype (Def_Id, Expression (First (New_Assoc_List))); end Build_Constrained_Itype; else Set_Etype (N, Typ); end if; -- STEP 5: Get remaining components according to discriminant values Step_5 : declare Dnode : Node_Id; Errors_Found : Boolean := False; Record_Def : Node_Id; Parent_Typ : Entity_Id; Parent_Typ_List : Elist_Id; Parent_Elmt : Elmt_Id; Root_Typ : Entity_Id; begin if Is_Derived_Type (Typ) and then Is_Tagged_Type (Typ) then Parent_Typ_List := New_Elmt_List; -- If this is an extension aggregate, the component list must -- include all components that are not in the given ancestor type. -- Otherwise, the component list must include components of all -- ancestors, starting with the root. if Nkind (N) = N_Extension_Aggregate then Root_Typ := Base_Type (Etype (Ancestor_Part (N))); else -- AI05-0115: check legality of aggregate for type with a -- private ancestor. Root_Typ := Root_Type (Typ); if Has_Private_Ancestor (Typ) then declare Ancestor : constant Entity_Id := Find_Private_Ancestor (Typ); Ancestor_Unit : constant Entity_Id := Cunit_Entity (Get_Source_Unit (Ancestor)); Parent_Unit : constant Entity_Id := Cunit_Entity (Get_Source_Unit (Base_Type (Etype (Ancestor)))); begin -- Check whether we are in a scope that has full view -- over the private ancestor and its parent. This can -- only happen if the derivation takes place in a child -- unit of the unit that declares the parent, and we are -- in the private part or body of that child unit, else -- the aggregate is illegal. if Is_Child_Unit (Ancestor_Unit) and then Scope (Ancestor_Unit) = Parent_Unit and then In_Open_Scopes (Scope (Ancestor)) and then (In_Private_Part (Scope (Ancestor)) or else In_Package_Body (Scope (Ancestor))) then null; else Error_Msg_NE ("type of aggregate has private ancestor&!", N, Root_Typ); Error_Msg_N ("must use extension aggregate!", N); return; end if; end; end if; Dnode := Declaration_Node (Base_Type (Root_Typ)); -- If we don't get a full declaration, then we have some error -- which will get signalled later so skip this part. Otherwise -- gather components of root that apply to the aggregate type. -- We use the base type in case there is an applicable stored -- constraint that renames the discriminants of the root. if Nkind (Dnode) = N_Full_Type_Declaration then Record_Def := Type_Definition (Dnode); Gather_Components (Base_Type (Typ), Component_List (Record_Def), Governed_By => New_Assoc_List, Into => Components, Report_Errors => Errors_Found); if Errors_Found then Error_Msg_N ("discriminant controlling variant part is not static", N); return; end if; end if; end if; Parent_Typ := Base_Type (Typ); while Parent_Typ /= Root_Typ loop Prepend_Elmt (Parent_Typ, To => Parent_Typ_List); Parent_Typ := Etype (Parent_Typ); if Nkind (Parent (Base_Type (Parent_Typ))) = N_Private_Type_Declaration or else Nkind (Parent (Base_Type (Parent_Typ))) = N_Private_Extension_Declaration then if Nkind (N) /= N_Extension_Aggregate then Error_Msg_NE ("type of aggregate has private ancestor&!", N, Parent_Typ); Error_Msg_N ("must use extension aggregate!", N); return; elsif Parent_Typ /= Root_Typ then Error_Msg_NE ("ancestor part of aggregate must be private type&", Ancestor_Part (N), Parent_Typ); return; end if; -- The current view of ancestor part may be a private type, -- while the context type is always non-private. elsif Is_Private_Type (Root_Typ) and then Present (Full_View (Root_Typ)) and then Nkind (N) = N_Extension_Aggregate then exit when Base_Type (Full_View (Root_Typ)) = Parent_Typ; end if; end loop; -- Now collect components from all other ancestors, beginning -- with the current type. If the type has unknown discriminants -- use the component list of the Underlying_Record_View, which -- needs to be used for the subsequent expansion of the aggregate -- into assignments. Parent_Elmt := First_Elmt (Parent_Typ_List); while Present (Parent_Elmt) loop Parent_Typ := Node (Parent_Elmt); if Has_Unknown_Discriminants (Parent_Typ) and then Present (Underlying_Record_View (Typ)) then Parent_Typ := Underlying_Record_View (Parent_Typ); end if; Record_Def := Type_Definition (Parent (Base_Type (Parent_Typ))); Gather_Components (Empty, Component_List (Record_Extension_Part (Record_Def)), Governed_By => New_Assoc_List, Into => Components, Report_Errors => Errors_Found); Next_Elmt (Parent_Elmt); end loop; -- Typ is not a derived tagged type else Record_Def := Type_Definition (Parent (Base_Type (Typ))); if Null_Present (Record_Def) then null; elsif not Has_Unknown_Discriminants (Typ) then Gather_Components (Base_Type (Typ), Component_List (Record_Def), Governed_By => New_Assoc_List, Into => Components, Report_Errors => Errors_Found); else Gather_Components (Base_Type (Underlying_Record_View (Typ)), Component_List (Record_Def), Governed_By => New_Assoc_List, Into => Components, Report_Errors => Errors_Found); end if; end if; if Errors_Found then return; end if; end Step_5; -- STEP 6: Find component Values Component := Empty; Component_Elmt := First_Elmt (Components); -- First scan the remaining positional associations in the aggregate. -- Remember that at this point Positional_Expr contains the current -- positional association if any is left after looking for discriminant -- values in step 3. while Present (Positional_Expr) and then Present (Component_Elmt) loop Component := Node (Component_Elmt); Resolve_Aggr_Expr (Positional_Expr, Component); -- Ada 2005 (AI-231) if Ada_Version >= Ada_2005 and then Known_Null (Positional_Expr) then Check_Can_Never_Be_Null (Component, Positional_Expr); end if; if Present (Get_Value (Component, Component_Associations (N))) then Error_Msg_NE ("more than one value supplied for Component &", N, Component); end if; Next (Positional_Expr); Next_Elmt (Component_Elmt); end loop; if Present (Positional_Expr) then Error_Msg_N ("too many components for record aggregate", Positional_Expr); end if; -- Now scan for the named arguments of the aggregate while Present (Component_Elmt) loop Component := Node (Component_Elmt); Expr := Get_Value (Component, Component_Associations (N), True); -- Note: The previous call to Get_Value sets the value of the -- variable Is_Box_Present. -- Ada 2005 (AI-287): Handle components with default initialization. -- Note: This feature was originally added to Ada 2005 for limited -- but it was finally allowed with any type. if Is_Box_Present then Check_Box_Component : declare Ctyp : constant Entity_Id := Etype (Component); begin -- If there is a default expression for the aggregate, copy -- it into a new association. This copy must modify the scopes -- of internal types that may be attached to the expression -- (e.g. index subtypes of arrays) because in general the type -- declaration and the aggregate appear in different scopes, -- and the backend requires the scope of the type to match the -- point at which it is elaborated. -- If the component has an initialization procedure (IP) we -- pass the component to the expander, which will generate -- the call to such IP. -- If the component has discriminants, their values must -- be taken from their subtype. This is indispensable for -- constraints that are given by the current instance of an -- enclosing type, to allow the expansion of the aggregate to -- replace the reference to the current instance by the target -- object of the aggregate. if Present (Parent (Component)) and then Nkind (Parent (Component)) = N_Component_Declaration and then Present (Expression (Parent (Component))) then Expr := New_Copy_Tree_And_Copy_Dimensions (Expression (Parent (Component)), New_Scope => Current_Scope, New_Sloc => Sloc (N)); -- As the type of the copied default expression may refer -- to discriminants of the record type declaration, these -- non-stored discriminants need to be rewritten into stored -- discriminant values for the aggregate. This is required -- in GNATprove mode, and is adopted in all modes to avoid -- special-casing GNATprove mode. if Is_Array_Type (Etype (Expr)) then declare Rec_Typ : constant Entity_Id := Scope (Component); -- Root record type whose discriminants may be used as -- bounds in range nodes. Index : Node_Id; begin -- Rewrite the range nodes occurring in the indexes -- and their types. Index := First_Index (Etype (Expr)); while Present (Index) loop Rewrite_Range (Rec_Typ, Index); Rewrite_Range (Rec_Typ, Scalar_Range (Etype (Index))); Next_Index (Index); end loop; -- Rewrite the range nodes occurring as aggregate -- bounds. if Nkind (Expr) = N_Aggregate and then Present (Aggregate_Bounds (Expr)) then Rewrite_Range (Rec_Typ, Aggregate_Bounds (Expr)); end if; end; end if; Add_Association (Component => Component, Expr => Expr, Assoc_List => New_Assoc_List); Set_Has_Self_Reference (N); -- A box-defaulted access component gets the value null. Also -- included are components of private types whose underlying -- type is an access type. In either case set the type of the -- literal, for subsequent use in semantic checks. elsif Present (Underlying_Type (Ctyp)) and then Is_Access_Type (Underlying_Type (Ctyp)) then -- If the component's type is private with an access type as -- its underlying type then we have to create an unchecked -- conversion to satisfy type checking. if Is_Private_Type (Ctyp) then declare Qual_Null : constant Node_Id := Make_Qualified_Expression (Sloc (N), Subtype_Mark => New_Occurrence_Of (Underlying_Type (Ctyp), Sloc (N)), Expression => Make_Null (Sloc (N))); Convert_Null : constant Node_Id := Unchecked_Convert_To (Ctyp, Qual_Null); begin Analyze_And_Resolve (Convert_Null, Ctyp); Add_Association (Component => Component, Expr => Convert_Null, Assoc_List => New_Assoc_List); end; -- Otherwise the component type is non-private else Expr := Make_Null (Sloc (N)); Set_Etype (Expr, Ctyp); Add_Association (Component => Component, Expr => Expr, Assoc_List => New_Assoc_List); end if; -- Ada 2012: If component is scalar with default value, use it elsif Is_Scalar_Type (Ctyp) and then Has_Default_Aspect (Ctyp) then Add_Association (Component => Component, Expr => Default_Aspect_Value (First_Subtype (Underlying_Type (Ctyp))), Assoc_List => New_Assoc_List); elsif Has_Non_Null_Base_Init_Proc (Ctyp) or else not Expander_Active then if Is_Record_Type (Ctyp) and then Has_Discriminants (Ctyp) and then not Is_Private_Type (Ctyp) then -- We build a partially initialized aggregate with the -- values of the discriminants and box initialization -- for the rest, if other components are present. -- The type of the aggregate is the known subtype of -- the component. The capture of discriminants must be -- recursive because subcomponents may be constrained -- (transitively) by discriminants of enclosing types. -- For a private type with discriminants, a call to the -- initialization procedure will be generated, and no -- subaggregate is needed. Capture_Discriminants : declare Loc : constant Source_Ptr := Sloc (N); Expr : Node_Id; begin Expr := Make_Aggregate (Loc, New_List, New_List); Set_Etype (Expr, Ctyp); -- If the enclosing type has discriminants, they have -- been collected in the aggregate earlier, and they -- may appear as constraints of subcomponents. -- Similarly if this component has discriminants, they -- might in turn be propagated to their components. if Has_Discriminants (Typ) then Add_Discriminant_Values (Expr, New_Assoc_List); Propagate_Discriminants (Expr, New_Assoc_List); elsif Has_Discriminants (Ctyp) then Add_Discriminant_Values (Expr, Component_Associations (Expr)); Propagate_Discriminants (Expr, Component_Associations (Expr)); else declare Comp : Entity_Id; begin -- If the type has additional components, create -- an OTHERS box association for them. Comp := First_Component (Ctyp); while Present (Comp) loop if Ekind (Comp) = E_Component then if not Is_Record_Type (Etype (Comp)) then Append_To (Component_Associations (Expr), Make_Component_Association (Loc, Choices => New_List ( Make_Others_Choice (Loc)), Expression => Empty, Box_Present => True)); end if; exit; end if; Next_Component (Comp); end loop; end; end if; Add_Association (Component => Component, Expr => Expr, Assoc_List => New_Assoc_List); end Capture_Discriminants; -- Otherwise the component type is not a record, or it has -- not discriminants, or it is private. else Add_Association (Component => Component, Expr => Empty, Assoc_List => New_Assoc_List, Is_Box_Present => True); end if; -- Otherwise we only need to resolve the expression if the -- component has partially initialized values (required to -- expand the corresponding assignments and run-time checks). elsif Present (Expr) and then Is_Partially_Initialized_Type (Ctyp) then Resolve_Aggr_Expr (Expr, Component); end if; end Check_Box_Component; elsif No (Expr) then -- Ignore hidden components associated with the position of the -- interface tags: these are initialized dynamically. if not Present (Related_Type (Component)) then Error_Msg_NE ("no value supplied for component &!", N, Component); end if; else Resolve_Aggr_Expr (Expr, Component); end if; Next_Elmt (Component_Elmt); end loop; -- STEP 7: check for invalid components + check type in choice list Step_7 : declare Assoc : Node_Id; New_Assoc : Node_Id; Selectr : Node_Id; -- Selector name Typech : Entity_Id; -- Type of first component in choice list begin if Present (Component_Associations (N)) then Assoc := First (Component_Associations (N)); else Assoc := Empty; end if; Verification : while Present (Assoc) loop Selectr := First (Choices (Assoc)); Typech := Empty; if Nkind (Selectr) = N_Others_Choice then -- Ada 2005 (AI-287): others choice may have expression or box if No (Others_Etype) and then Others_Box = 0 then Error_Msg_N ("OTHERS must represent at least one component", Selectr); elsif Others_Box = 1 and then Warn_On_Redundant_Constructs then Error_Msg_N ("others choice is redundant?", Box_Node); Error_Msg_N ("\previous choices cover all components?", Box_Node); end if; exit Verification; end if; while Present (Selectr) loop New_Assoc := First (New_Assoc_List); while Present (New_Assoc) loop Component := First (Choices (New_Assoc)); if Chars (Selectr) = Chars (Component) then if Style_Check then Check_Identifier (Selectr, Entity (Component)); end if; exit; end if; Next (New_Assoc); end loop; -- If no association, this is not a legal component of the type -- in question, unless its association is provided with a box. if No (New_Assoc) then if Box_Present (Parent (Selectr)) then -- This may still be a bogus component with a box. Scan -- list of components to verify that a component with -- that name exists. declare C : Entity_Id; begin C := First_Component (Typ); while Present (C) loop if Chars (C) = Chars (Selectr) then -- If the context is an extension aggregate, -- the component must not be inherited from -- the ancestor part of the aggregate. if Nkind (N) /= N_Extension_Aggregate or else Scope (Original_Record_Component (C)) /= Etype (Ancestor_Part (N)) then exit; end if; end if; Next_Component (C); end loop; if No (C) then Error_Msg_Node_2 := Typ; Error_Msg_N ("& is not a component of}", Selectr); end if; end; elsif Chars (Selectr) /= Name_uTag and then Chars (Selectr) /= Name_uParent then if not Has_Discriminants (Typ) then Error_Msg_Node_2 := Typ; Error_Msg_N ("& is not a component of}", Selectr); else Error_Msg_N ("& is not a component of the aggregate subtype", Selectr); end if; Check_Misspelled_Component (Components, Selectr); end if; elsif No (Typech) then Typech := Base_Type (Etype (Component)); -- AI05-0199: In Ada 2012, several components of anonymous -- access types can appear in a choice list, as long as the -- designated types match. elsif Typech /= Base_Type (Etype (Component)) then if Ada_Version >= Ada_2012 and then Ekind (Typech) = E_Anonymous_Access_Type and then Ekind (Etype (Component)) = E_Anonymous_Access_Type and then Base_Type (Designated_Type (Typech)) = Base_Type (Designated_Type (Etype (Component))) and then Subtypes_Statically_Match (Typech, (Etype (Component))) then null; elsif not Box_Present (Parent (Selectr)) then Error_Msg_N ("components in choice list must have same type", Selectr); end if; end if; Next (Selectr); end loop; Next (Assoc); end loop Verification; end Step_7; -- STEP 8: replace the original aggregate Step_8 : declare New_Aggregate : constant Node_Id := New_Copy (N); begin Set_Expressions (New_Aggregate, No_List); Set_Etype (New_Aggregate, Etype (N)); Set_Component_Associations (New_Aggregate, New_Assoc_List); Set_Check_Actuals (New_Aggregate, Check_Actuals (N)); Rewrite (N, New_Aggregate); end Step_8; -- Check the dimensions of the components in the record aggregate Analyze_Dimension_Extension_Or_Record_Aggregate (N); end Resolve_Record_Aggregate; ----------------------------- -- Check_Can_Never_Be_Null -- ----------------------------- procedure Check_Can_Never_Be_Null (Typ : Entity_Id; Expr : Node_Id) is Comp_Typ : Entity_Id; begin pragma Assert (Ada_Version >= Ada_2005 and then Present (Expr) and then Known_Null (Expr)); case Ekind (Typ) is when E_Array_Type => Comp_Typ := Component_Type (Typ); when E_Component | E_Discriminant => Comp_Typ := Etype (Typ); when others => return; end case; if Can_Never_Be_Null (Comp_Typ) then -- Here we know we have a constraint error. Note that we do not use -- Apply_Compile_Time_Constraint_Error here to the Expr, which might -- seem the more natural approach. That's because in some cases the -- components are rewritten, and the replacement would be missed. -- We do not mark the whole aggregate as raising a constraint error, -- because the association may be a null array range. Error_Msg_N ("(Ada 2005) null not allowed in null-excluding component??", Expr); Error_Msg_N ("\Constraint_Error will be raised at run time??", Expr); Rewrite (Expr, Make_Raise_Constraint_Error (Sloc (Expr), Reason => CE_Access_Check_Failed)); Set_Etype (Expr, Comp_Typ); Set_Analyzed (Expr); end if; end Check_Can_Never_Be_Null; --------------------- -- Sort_Case_Table -- --------------------- procedure Sort_Case_Table (Case_Table : in out Case_Table_Type) is U : constant Int := Case_Table'Last; K : Int; J : Int; T : Case_Bounds; begin K := 1; while K < U loop T := Case_Table (K + 1); J := K + 1; while J > 1 and then Expr_Value (Case_Table (J - 1).Lo) > Expr_Value (T.Lo) loop Case_Table (J) := Case_Table (J - 1); J := J - 1; end loop; Case_Table (J) := T; K := K + 1; end loop; end Sort_Case_Table; end Sem_Aggr;