------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- S E M _ C H 1 3 -- -- -- -- S p e c -- -- -- -- Copyright (C) 1992-2018, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING3. If not, go to -- -- http://www.gnu.org/licenses for a complete copy of the license. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ with Table; with Types; use Types; with Uintp; use Uintp; package Sem_Ch13 is procedure Analyze_At_Clause (N : Node_Id); procedure Analyze_Attribute_Definition_Clause (N : Node_Id); procedure Analyze_Enumeration_Representation_Clause (N : Node_Id); procedure Analyze_Free_Statement (N : Node_Id); procedure Analyze_Freeze_Entity (N : Node_Id); procedure Analyze_Freeze_Generic_Entity (N : Node_Id); procedure Analyze_Record_Representation_Clause (N : Node_Id); procedure Analyze_Code_Statement (N : Node_Id); procedure Analyze_Aspect_Specifications (N : Node_Id; E : Entity_Id); -- This procedure is called to analyze aspect specifications for node N. E -- is the corresponding entity declared by the declaration node N. Callers -- should check that Has_Aspects (N) is True before calling this routine. procedure Analyze_Aspects_On_Subprogram_Body_Or_Stub (N : Node_Id); -- Analyze the aspect specifications of [generic] subprogram body or stub -- N. Callers should check that Has_Aspects (N) is True before calling the -- routine. This routine diagnoses misplaced aspects that should appear on -- the initial declaration of N and offers suggestions for replacements. procedure Adjust_Record_For_Reverse_Bit_Order (R : Entity_Id); -- Called from Freeze where R is a record entity for which reverse bit -- order is specified and there is at least one component clause. Note: -- component positions are normally adjusted as per AI95-0133, unless -- -gnatd.p is used to restore original Ada 95 mode. procedure Check_Record_Representation_Clause (N : Node_Id); -- This procedure completes the analysis of a record representation clause -- N. It is called at freeze time after adjustment of component clause bit -- positions for possible non-standard bit order. In the case of Ada 2005 -- (machine scalar) mode, this adjustment can make substantial changes, so -- some checks, in particular for component overlaps cannot be done at the -- time the record representation clause is first seen, but must be delayed -- till freeze time, and in particular is called after calling the above -- procedure for adjusting record bit positions for reverse bit order. procedure Initialize; -- Initialize internal tables for new compilation procedure Kill_Rep_Clause (N : Node_Id); -- This procedure is called for a rep clause N when we are in -gnatI mode -- (Ignore_Rep_Clauses). It replaces the node N with a null statement. This -- is only called if Ignore_Rep_Clauses is True. procedure Set_Enum_Esize (T : Entity_Id); -- This routine sets the Esize field for an enumeration type T, based -- on the current representation information available for T. Note that -- the setting of the RM_Size field is not affected. This routine also -- initializes the alignment field to zero. function Minimum_Size (T : Entity_Id; Biased : Boolean := False) return Nat; -- Given an elementary type, determines the minimum number of bits required -- to represent all values of the type. This function may not be called -- with any other types. If the flag Biased is set True, then the minimum -- size calculation that biased representation is used in the case of a -- discrete type, e.g. the range 7..8 gives a minimum size of 4 with -- Biased set to False, and 1 with Biased set to True. Note that the -- biased parameter only has an effect if the type is not biased, it -- causes Minimum_Size to indicate the minimum size of an object with -- the given type, of the size the type would have if it were biased. If -- the type is already biased, then Minimum_Size returns the biased size, -- regardless of the setting of Biased. Also, fixed-point types are never -- biased in the current implementation. If the size is not known at -- compile time, this function returns 0. procedure Check_Constant_Address_Clause (Expr : Node_Id; U_Ent : Entity_Id); -- Expr is an expression for an address clause. This procedure checks -- that the expression is constant, in the limited sense that it is safe -- to evaluate it at the point the object U_Ent is declared, rather than -- at the point of the address clause. The condition for this to be true -- is that the expression has no variables, no constants declared after -- U_Ent, and no calls to non-pure functions. If this condition is not -- met, then an appropriate error message is posted. This check is applied -- at the point an object with an address clause is frozen, as well as for -- address clauses for tasks and entries. procedure Check_Size (N : Node_Id; T : Entity_Id; Siz : Uint; Biased : out Boolean); -- Called when size Siz is specified for subtype T. This subprogram checks -- that the size is appropriate, posting errors on node N as required. -- This check is effective for elementary types and bit-packed arrays. -- For other non-elementary types, a check is only made if an explicit -- size has been given for the type (and the specified size must match). -- The parameter Biased is set False if the size specified did not require -- the use of biased representation, and True if biased representation -- was required to meet the size requirement. Note that Biased is only -- set if the type is not currently biased, but biasing it is the only -- way to meet the requirement. If the type is currently biased, then -- this biased size is used in the initial check, and Biased is False. -- If the size is too small, and an error message is given, then both -- Esize and RM_Size are reset to the allowed minimum value in T. function Rep_Item_Too_Early (T : Entity_Id; N : Node_Id) return Boolean; -- Called at start of processing a representation clause/pragma. Used to -- check that the representation item is not being applied to an incomplete -- type or to a generic formal type or a type derived from a generic formal -- type. Returns False if no such error occurs. If this error does occur, -- appropriate error messages are posted on node N, and True is returned. generic with procedure Replace_Type_Reference (N : Node_Id); procedure Replace_Type_References_Generic (N : Node_Id; T : Entity_Id); -- This is used to scan an expression for a predicate or invariant aspect -- replacing occurrences of the name of the subtype to which the aspect -- applies with appropriate references to the parameter of the predicate -- function or invariant procedure. The procedure passed as a generic -- parameter does the actual replacement of node N, which is either a -- simple direct reference to T, or a selected component that represents -- an appropriately qualified occurrence of T. function Rep_Item_Too_Late (T : Entity_Id; N : Node_Id; FOnly : Boolean := False) return Boolean; -- Called at the start of processing a representation clause or a -- representation pragma. Used to check that a representation item for -- entity T does not appear too late (according to the rules in RM 13.1(9) -- and RM 13.1(10)). N is the associated node, which in the pragma case -- is the pragma or representation clause itself, used for placing error -- messages if the item is too late. -- -- Fonly is a flag that causes only the freezing rule (para 9) to be -- applied, and the tests of para 10 are skipped. This is appropriate for -- both subtype related attributes (Alignment and Size) and for stream -- attributes, which, although certainly not subtype related attributes, -- clearly should not be subject to the para 10 restrictions (see -- AI95-00137). Similarly, we also skip the para 10 restrictions for -- the Storage_Size case where they also clearly do not apply, and for -- Stream_Convert which is in the same category as the stream attributes. -- -- If the rep item is too late, an appropriate message is output and True -- is returned, which is a signal that the caller should abandon processing -- for the item. If the item is not too late, then False is returned, and -- the caller can continue processing the item. -- -- If no error is detected, this call also as a side effect links the -- representation item onto the head of the representation item chain -- (referenced by the First_Rep_Item field of the entity). -- -- Note: Rep_Item_Too_Late must be called with the underlying type in the -- case of a private or incomplete type. The protocol is to first check for -- Rep_Item_Too_Early using the initial entity, then take the underlying -- type, then call Rep_Item_Too_Late on the result. -- -- Note: Calls to Rep_Item_Too_Late are ignored for the case of attribute -- definition clauses which have From_Aspect_Specification set. This is -- because such clauses are linked on to the Rep_Item chain in procedure -- Sem_Ch13.Analyze_Aspect_Specifications. See that procedure for details. function Same_Representation (Typ1, Typ2 : Entity_Id) return Boolean; -- Given two types, where the two types are related by possible derivation, -- determines if the two types have the same representation, or different -- representations, requiring the special processing for representation -- change. A False result is possible only for array, enumeration or -- record types. procedure Validate_Compile_Time_Warning_Error (N : Node_Id); -- N is a pragma Compile_Time_Error or Compile_Warning_Error whose boolean -- expression is not known at compile time. This procedure makes an entry -- in a table. The actual checking is performed by Validate_Compile_Time_ -- Warning_Errors, which is invoked after calling the back end. procedure Validate_Compile_Time_Warning_Errors; -- This routine is called after calling the back end to validate pragmas -- Compile_Time_Error and Compile_Time_Warning for size and alignment -- appropriateness. The reason it is called that late is to take advantage -- of any back-annotation of size and alignment performed by the back end. procedure Validate_Unchecked_Conversion (N : Node_Id; Act_Unit : Entity_Id); -- Validate a call to unchecked conversion. N is the node for the actual -- instantiation, which is used only for error messages. Act_Unit is the -- entity for the instantiation, from which the actual types etc. for this -- instantiation can be determined. This procedure makes an entry in a -- table and/or generates an N_Validate_Unchecked_Conversion node. The -- actual checking is done in Validate_Unchecked_Conversions or in the -- back end as required. procedure Validate_Unchecked_Conversions; -- This routine is called after calling the back end to validate unchecked -- conversions for size and alignment appropriateness. The reason it is -- called that late is to take advantage of any back-annotation of size -- and alignment performed by the back end. procedure Validate_Address_Clauses; -- This is called after the back end has been called (and thus after the -- alignments of objects have been back annotated). It goes through the -- table of saved address clauses checking for suspicious alignments and -- if necessary issuing warnings. procedure Validate_Independence; -- This is called after the back end has been called (and thus after the -- layout of components has been back annotated). It goes through the -- table of saved pragma Independent[_Component] entries, checking that -- independence can be achieved, and if necessary issuing error messages. ------------------------------------- -- Table for Validate_Independence -- ------------------------------------- -- If a legal pragma Independent or Independent_Components is given for -- an entity, then an entry is made in this table, to be checked by a -- call to Validate_Independence after back annotation of layout is done. type Independence_Check_Record is record N : Node_Id; -- The pragma Independent or Independent_Components E : Entity_Id; -- The entity to which it applies end record; package Independence_Checks is new Table.Table ( Table_Component_Type => Independence_Check_Record, Table_Index_Type => Int, Table_Low_Bound => 1, Table_Initial => 20, Table_Increment => 200, Table_Name => "Independence_Checks"); ----------------------------------- -- Handling of Aspect Visibility -- ----------------------------------- -- The visibility of aspects is tricky. First, the visibility is delayed -- to the freeze point. This is not too complicated, what we do is simply -- to leave the aspect "laying in wait" for the freeze point, and at that -- point materialize and analyze the corresponding attribute definition -- clause or pragma. There is some special processing for preconditions -- and postonditions, where the pragmas themselves deal with the required -- delay, but basically the approach is the same, delay analysis of the -- expression to the freeze point. -- Much harder is the requirement for diagnosing cases in which an early -- freeze causes a change in visibility. Consider: -- package AspectVis is -- R_Size : constant Integer := 32; -- -- package Inner is -- type R is new Integer with -- Size => R_Size; -- F : R; -- freezes -- R_Size : constant Integer := 64; -- S : constant Integer := R'Size; -- 32 not 64 -- end Inner; -- end AspectVis; -- Here the 32 not 64 shows what would be expected if this program were -- legal, since the evaluation of R_Size has to be done at the freeze -- point and gets the outer definition not the inner one. -- But the language rule requires this program to be diagnosed as illegal -- because the visibility changes between the freeze point and the end of -- the declarative region. -- To meet this requirement, we first note that the Expression field of the -- N_Aspect_Specification node holds the raw unanalyzed expression, which -- will get used in processing the aspect. At the time of analyzing the -- N_Aspect_Specification node, we create a complete copy of the expression -- and store it in the entity field of the Identifier (an odd usage, but -- the identifier is not used except to identify the aspect, so its Entity -- field is otherwise unused, and we are short of room in the node). -- This copy stays unanalyzed up to the freeze point, where we analyze the -- resulting pragma or attribute definition clause, except that in the -- case of invariants and predicates, we mark occurrences of the subtype -- name as having the entity of the subprogram parameter, so that they -- will not cause trouble in the following steps. -- Then at the freeze point, we create another copy of this unanalyzed -- expression. By this time we no longer need the Expression field for -- other purposes, so we can store it there. Now we have two copies of -- the original unanalyzed expression. One of them gets preanalyzed at -- the freeze point to capture the visibility at the freeze point. -- Now when we hit the freeze all at the end of the declarative part, if -- we come across a frozen entity with delayed aspects, we still have one -- copy of the unanalyzed expression available in the node, and we again -- do a preanalysis using that copy and the visibility at the end of the -- declarative part. Now we have two preanalyzed expression (preanalysis -- is good enough, since we are only interested in referenced entities). -- One captures the visibility at the freeze point, the other captures the -- visibility at the end of the declarative part. We see if the entities -- in these two expressions are the same, by seeing if the two expressions -- are fully conformant, and if not, issue appropriate error messages. -- Quite an awkward approach, but this is an awkard requirement procedure Analyze_Aspects_At_Freeze_Point (E : Entity_Id); -- Analyze all the delayed aspects for entity E at freezing point. This -- includes dealing with inheriting delayed aspects from the parent type -- in the case where a derived type is frozen. procedure Check_Aspect_At_Freeze_Point (ASN : Node_Id); -- Performs the processing described above at the freeze point, ASN is the -- N_Aspect_Specification node for the aspect. procedure Check_Aspect_At_End_Of_Declarations (ASN : Node_Id); -- Performs the processing described above at the freeze all point, and -- issues appropriate error messages if the visibility has indeed changed. -- Again, ASN is the N_Aspect_Specification node for the aspect. procedure Inherit_Aspects_At_Freeze_Point (Typ : Entity_Id); -- Given an entity Typ that denotes a derived type or a subtype, this -- routine performs the inheritance of aspects at the freeze point. procedure Resolve_Aspect_Expressions (E : Entity_Id); -- Name resolution of an aspect expression happens at the end of the -- current declarative part or at the freeze point for the entity, -- whichever comes first. For declarations in the visible part of a -- package, name resolution takes place before analysis of the private -- part even though the freeze point of the entity may appear later. procedure Validate_Iterable_Aspect (Typ : Entity_Id; ASN : Node_Id); -- For SPARK 2014 formal containers. The expression has the form of an -- aggregate, and each entry must denote a function with the proper syntax -- for First, Next, and Has_Element. Optionally an Element primitive may -- also be defined. ----------------------------------------------------------- -- Visibility of Discriminants in Aspect Specifications -- ----------------------------------------------------------- -- The discriminants of a type are visible when analyzing the aspect -- specifications of a type declaration or protected type declaration, -- but not when analyzing those of a subtype declaration. The following -- routines enforce this distinction. procedure Install_Discriminants (E : Entity_Id); -- Make visible the discriminants of type entity E procedure Push_Scope_And_Install_Discriminants (E : Entity_Id); -- Push scope E and makes visible the discriminants of type entity E if E -- has discriminants and is not a subtype. procedure Uninstall_Discriminants (E : Entity_Id); -- Remove visibility to the discriminants of type entity E procedure Uninstall_Discriminants_And_Pop_Scope (E : Entity_Id); -- Remove visibility to the discriminants of type entity E and pop the -- scope stack if E has discriminants and is not a subtype. end Sem_Ch13;