------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- S E M _ D I M -- -- -- -- B o d y -- -- -- -- Copyright (C) 2011-2018, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING3. If not, go to -- -- http://www.gnu.org/licenses for a complete copy of the license. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ with Aspects; use Aspects; with Atree; use Atree; with Einfo; use Einfo; with Errout; use Errout; with Exp_Util; use Exp_Util; with Lib; use Lib; with Namet; use Namet; with Nlists; use Nlists; with Nmake; use Nmake; with Opt; use Opt; with Rtsfind; use Rtsfind; with Sem; use Sem; with Sem_Aux; use Sem_Aux; with Sem_Eval; use Sem_Eval; with Sem_Res; use Sem_Res; with Sem_Util; use Sem_Util; with Sinfo; use Sinfo; with Sinput; use Sinput; with Snames; use Snames; with Stand; use Stand; with Stringt; use Stringt; with Table; with Tbuild; use Tbuild; with Uintp; use Uintp; with Urealp; use Urealp; with GNAT.HTable; package body Sem_Dim is ------------------------- -- Rational Arithmetic -- ------------------------- type Whole is new Int; subtype Positive_Whole is Whole range 1 .. Whole'Last; type Rational is record Numerator : Whole; Denominator : Positive_Whole; end record; Zero : constant Rational := Rational'(Numerator => 0, Denominator => 1); No_Rational : constant Rational := Rational'(Numerator => 0, Denominator => 2); -- Used to indicate an expression that cannot be interpreted as a rational -- Returned value of the Create_Rational_From routine when parameter Expr -- is not a static representation of a rational. -- Rational constructors function "+" (Right : Whole) return Rational; function GCD (Left, Right : Whole) return Int; function Reduce (X : Rational) return Rational; -- Unary operator for Rational function "-" (Right : Rational) return Rational; function "abs" (Right : Rational) return Rational; -- Rational operations for Rationals function "+" (Left, Right : Rational) return Rational; function "-" (Left, Right : Rational) return Rational; function "*" (Left, Right : Rational) return Rational; function "/" (Left, Right : Rational) return Rational; ------------------ -- System Types -- ------------------ Max_Number_Of_Dimensions : constant := 7; -- Maximum number of dimensions in a dimension system High_Position_Bound : constant := Max_Number_Of_Dimensions; Invalid_Position : constant := 0; Low_Position_Bound : constant := 1; subtype Dimension_Position is Nat range Invalid_Position .. High_Position_Bound; type Name_Array is array (Dimension_Position range Low_Position_Bound .. High_Position_Bound) of Name_Id; -- Store the names of all units within a system No_Names : constant Name_Array := (others => No_Name); type Symbol_Array is array (Dimension_Position range Low_Position_Bound .. High_Position_Bound) of String_Id; -- Store the symbols of all units within a system No_Symbols : constant Symbol_Array := (others => No_String); -- The following record should be documented field by field type System_Type is record Type_Decl : Node_Id; Unit_Names : Name_Array; Unit_Symbols : Symbol_Array; Dim_Symbols : Symbol_Array; Count : Dimension_Position; end record; Null_System : constant System_Type := (Empty, No_Names, No_Symbols, No_Symbols, Invalid_Position); subtype System_Id is Nat; -- The following table maps types to systems package System_Table is new Table.Table ( Table_Component_Type => System_Type, Table_Index_Type => System_Id, Table_Low_Bound => 1, Table_Initial => 5, Table_Increment => 5, Table_Name => "System_Table"); -------------------- -- Dimension Type -- -------------------- type Dimension_Type is array (Dimension_Position range Low_Position_Bound .. High_Position_Bound) of Rational; Null_Dimension : constant Dimension_Type := (others => Zero); type Dimension_Table_Range is range 0 .. 510; function Dimension_Table_Hash (Key : Node_Id) return Dimension_Table_Range; -- The following table associates nodes with dimensions package Dimension_Table is new GNAT.HTable.Simple_HTable (Header_Num => Dimension_Table_Range, Element => Dimension_Type, No_Element => Null_Dimension, Key => Node_Id, Hash => Dimension_Table_Hash, Equal => "="); ------------------ -- Symbol Types -- ------------------ type Symbol_Table_Range is range 0 .. 510; function Symbol_Table_Hash (Key : Entity_Id) return Symbol_Table_Range; -- Each subtype with a dimension has a symbolic representation of the -- related unit. This table establishes a relation between the subtype -- and the symbol. package Symbol_Table is new GNAT.HTable.Simple_HTable (Header_Num => Symbol_Table_Range, Element => String_Id, No_Element => No_String, Key => Entity_Id, Hash => Symbol_Table_Hash, Equal => "="); -- The following array enumerates all contexts which may contain or -- produce a dimension. OK_For_Dimension : constant array (Node_Kind) of Boolean := (N_Attribute_Reference => True, N_Case_Expression => True, N_Expanded_Name => True, N_Explicit_Dereference => True, N_Defining_Identifier => True, N_Function_Call => True, N_Identifier => True, N_If_Expression => True, N_Indexed_Component => True, N_Integer_Literal => True, N_Op_Abs => True, N_Op_Add => True, N_Op_Divide => True, N_Op_Expon => True, N_Op_Minus => True, N_Op_Mod => True, N_Op_Multiply => True, N_Op_Plus => True, N_Op_Rem => True, N_Op_Subtract => True, N_Qualified_Expression => True, N_Real_Literal => True, N_Selected_Component => True, N_Slice => True, N_Type_Conversion => True, N_Unchecked_Type_Conversion => True, others => False); ----------------------- -- Local Subprograms -- ----------------------- procedure Analyze_Dimension_Assignment_Statement (N : Node_Id); -- Subroutine of Analyze_Dimension for assignment statement. Check that the -- dimensions of the left-hand side and the right-hand side of N match. procedure Analyze_Dimension_Binary_Op (N : Node_Id); -- Subroutine of Analyze_Dimension for binary operators. Check the -- dimensions of the right and the left operand permit the operation. -- Then, evaluate the resulting dimensions for each binary operator. procedure Analyze_Dimension_Component_Declaration (N : Node_Id); -- Subroutine of Analyze_Dimension for component declaration. Check that -- the dimensions of the type of N and of the expression match. procedure Analyze_Dimension_Extended_Return_Statement (N : Node_Id); -- Subroutine of Analyze_Dimension for extended return statement. Check -- that the dimensions of the returned type and of the returned object -- match. procedure Analyze_Dimension_Has_Etype (N : Node_Id); -- Subroutine of Analyze_Dimension for a subset of N_Has_Etype denoted by -- the list below: -- N_Attribute_Reference -- N_Identifier -- N_Indexed_Component -- N_Qualified_Expression -- N_Selected_Component -- N_Slice -- N_Type_Conversion -- N_Unchecked_Type_Conversion procedure Analyze_Dimension_Case_Expression (N : Node_Id); -- Verify that all alternatives have the same dimension procedure Analyze_Dimension_If_Expression (N : Node_Id); -- Verify that all alternatives have the same dimension procedure Analyze_Dimension_Number_Declaration (N : Node_Id); -- Procedure to analyze dimension of expression in a number declaration. -- This allows a named number to have nontrivial dimensions, while by -- default a named number is dimensionless. procedure Analyze_Dimension_Object_Declaration (N : Node_Id); -- Subroutine of Analyze_Dimension for object declaration. Check that -- the dimensions of the object type and the dimensions of the expression -- (if expression is present) match. Note that when the expression is -- a literal, no error is returned. This special case allows object -- declaration such as: m : constant Length := 1.0; procedure Analyze_Dimension_Object_Renaming_Declaration (N : Node_Id); -- Subroutine of Analyze_Dimension for object renaming declaration. Check -- the dimensions of the type and of the renamed object name of N match. procedure Analyze_Dimension_Simple_Return_Statement (N : Node_Id); -- Subroutine of Analyze_Dimension for simple return statement -- Check that the dimensions of the returned type and of the returned -- expression match. procedure Analyze_Dimension_Subtype_Declaration (N : Node_Id); -- Subroutine of Analyze_Dimension for subtype declaration. Propagate the -- dimensions from the parent type to the identifier of N. Note that if -- both the identifier and the parent type of N are not dimensionless, -- return an error. procedure Analyze_Dimension_Type_Conversion (N : Node_Id); -- Type conversions handle conversions between literals and dimensioned -- types, from dimensioned types to their base type, and between different -- dimensioned systems. Dimensions of the conversion are obtained either -- from those of the expression, or from the target type, and dimensional -- consistency must be checked when converting between values belonging -- to different dimensioned systems. procedure Analyze_Dimension_Unary_Op (N : Node_Id); -- Subroutine of Analyze_Dimension for unary operators. For Plus, Minus and -- Abs operators, propagate the dimensions from the operand to N. function Create_Rational_From (Expr : Node_Id; Complain : Boolean) return Rational; -- Given an arbitrary expression Expr, return a valid rational if Expr can -- be interpreted as a rational. Otherwise return No_Rational and also an -- error message if Complain is set to True. function Dimensions_Of (N : Node_Id) return Dimension_Type; -- Return the dimension vector of node N function Dimensions_Msg_Of (N : Node_Id; Description_Needed : Boolean := False) return String; -- Given a node N, return the dimension symbols of N, preceded by "has -- dimension" if Description_Needed. if N is dimensionless, return "'[']", -- or "is dimensionless" if Description_Needed. function Dimension_System_Root (T : Entity_Id) return Entity_Id; -- Given a type that has dimension information, return the type that is the -- root of its dimension system, e.g. Mks_Type. If T is not a dimensioned -- type, i.e. a standard numeric type, return Empty. procedure Dim_Warning_For_Numeric_Literal (N : Node_Id; Typ : Entity_Id); -- Issue a warning on the given numeric literal N to indicate that the -- compiler made the assumption that the literal is not dimensionless -- but has the dimension of Typ. procedure Eval_Op_Expon_With_Rational_Exponent (N : Node_Id; Exponent_Value : Rational); -- Evaluate the exponent it is a rational and the operand has a dimension function Exists (Dim : Dimension_Type) return Boolean; -- Returns True iff Dim does not denote the null dimension function Exists (Str : String_Id) return Boolean; -- Returns True iff Str does not denote No_String function Exists (Sys : System_Type) return Boolean; -- Returns True iff Sys does not denote the null system function From_Dim_To_Str_Of_Dim_Symbols (Dims : Dimension_Type; System : System_Type; In_Error_Msg : Boolean := False) return String_Id; -- Given a dimension vector and a dimension system, return the proper -- string of dimension symbols. If In_Error_Msg is True (i.e. the String_Id -- will be used to issue an error message) then this routine has a special -- handling for the insertion characters * or [ which must be preceded by -- a quote ' to be placed literally into the message. function From_Dim_To_Str_Of_Unit_Symbols (Dims : Dimension_Type; System : System_Type) return String_Id; -- Given a dimension vector and a dimension system, return the proper -- string of unit symbols. function Is_Dim_IO_Package_Entity (E : Entity_Id) return Boolean; -- Return True if E is the package entity of System.Dim.Float_IO or -- System.Dim.Integer_IO. function Is_Invalid (Position : Dimension_Position) return Boolean; -- Return True if Pos denotes the invalid position procedure Move_Dimensions (From : Node_Id; To : Node_Id); -- Copy dimension vector of From to To and delete dimension vector of From procedure Remove_Dimensions (N : Node_Id); -- Remove the dimension vector of node N procedure Set_Dimensions (N : Node_Id; Val : Dimension_Type); -- Associate a dimension vector with a node procedure Set_Symbol (E : Entity_Id; Val : String_Id); -- Associate a symbol representation of a dimension vector with a subtype function String_From_Numeric_Literal (N : Node_Id) return String_Id; -- Return the string that corresponds to the numeric litteral N as it -- appears in the source. function Symbol_Of (E : Entity_Id) return String_Id; -- E denotes a subtype with a dimension. Return the symbol representation -- of the dimension vector. function System_Of (E : Entity_Id) return System_Type; -- E denotes a type, return associated system of the type if it has one --------- -- "+" -- --------- function "+" (Right : Whole) return Rational is begin return Rational'(Numerator => Right, Denominator => 1); end "+"; function "+" (Left, Right : Rational) return Rational is R : constant Rational := Rational'(Numerator => Left.Numerator * Right.Denominator + Left.Denominator * Right.Numerator, Denominator => Left.Denominator * Right.Denominator); begin return Reduce (R); end "+"; --------- -- "-" -- --------- function "-" (Right : Rational) return Rational is begin return Rational'(Numerator => -Right.Numerator, Denominator => Right.Denominator); end "-"; function "-" (Left, Right : Rational) return Rational is R : constant Rational := Rational'(Numerator => Left.Numerator * Right.Denominator - Left.Denominator * Right.Numerator, Denominator => Left.Denominator * Right.Denominator); begin return Reduce (R); end "-"; --------- -- "*" -- --------- function "*" (Left, Right : Rational) return Rational is R : constant Rational := Rational'(Numerator => Left.Numerator * Right.Numerator, Denominator => Left.Denominator * Right.Denominator); begin return Reduce (R); end "*"; --------- -- "/" -- --------- function "/" (Left, Right : Rational) return Rational is R : constant Rational := abs Right; L : Rational := Left; begin if Right.Numerator < 0 then L.Numerator := Whole (-Integer (L.Numerator)); end if; return Reduce (Rational'(Numerator => L.Numerator * R.Denominator, Denominator => L.Denominator * R.Numerator)); end "/"; ----------- -- "abs" -- ----------- function "abs" (Right : Rational) return Rational is begin return Rational'(Numerator => abs Right.Numerator, Denominator => Right.Denominator); end "abs"; ------------------------------ -- Analyze_Aspect_Dimension -- ------------------------------ -- with Dimension => -- ([Symbol =>] SYMBOL, DIMENSION_VALUE {, DIMENSION_Value}) -- -- SYMBOL ::= STRING_LITERAL | CHARACTER_LITERAL -- DIMENSION_VALUE ::= -- RATIONAL -- | others => RATIONAL -- | DISCRETE_CHOICE_LIST => RATIONAL -- RATIONAL ::= [-] NUMERIC_LITERAL [/ NUMERIC_LITERAL] -- Note that when the dimensioned type is an integer type, then any -- dimension value must be an integer literal. procedure Analyze_Aspect_Dimension (N : Node_Id; Id : Entity_Id; Aggr : Node_Id) is Def_Id : constant Entity_Id := Defining_Identifier (N); Processed : array (Dimension_Type'Range) of Boolean := (others => False); -- This array is used when processing ranges or Others_Choice as part of -- the dimension aggregate. Dimensions : Dimension_Type := Null_Dimension; procedure Extract_Power (Expr : Node_Id; Position : Dimension_Position); -- Given an expression with denotes a rational number, read the number -- and associate it with Position in Dimensions. function Position_In_System (Id : Node_Id; System : System_Type) return Dimension_Position; -- Given an identifier which denotes a dimension, return the position of -- that dimension within System. ------------------- -- Extract_Power -- ------------------- procedure Extract_Power (Expr : Node_Id; Position : Dimension_Position) is begin Dimensions (Position) := Create_Rational_From (Expr, True); Processed (Position) := True; -- If the dimensioned root type is an integer type, it is not -- particularly useful, and fractional dimensions do not make -- much sense for such types, so previously we used to reject -- dimensions of integer types that were not integer literals. -- However, the manipulation of dimensions does not depend on -- the kind of root type, so we can accept this usage for rare -- cases where dimensions are specified for integer values. end Extract_Power; ------------------------ -- Position_In_System -- ------------------------ function Position_In_System (Id : Node_Id; System : System_Type) return Dimension_Position is Dimension_Name : constant Name_Id := Chars (Id); begin for Position in System.Unit_Names'Range loop if Dimension_Name = System.Unit_Names (Position) then return Position; end if; end loop; return Invalid_Position; end Position_In_System; -- Local variables Assoc : Node_Id; Choice : Node_Id; Expr : Node_Id; Num_Choices : Nat := 0; Num_Dimensions : Nat := 0; Others_Seen : Boolean := False; Position : Nat := 0; Sub_Ind : Node_Id; Symbol : String_Id := No_String; Symbol_Expr : Node_Id; System : System_Type; Typ : Entity_Id; Errors_Count : Nat; -- Errors_Count is a count of errors detected by the compiler so far -- just before the extraction of symbol, names and values in the -- aggregate (Step 2). -- -- At the end of the analysis, there is a check to verify that this -- count equals to Serious_Errors_Detected i.e. no erros have been -- encountered during the process. Otherwise the Dimension_Table is -- not filled. -- Start of processing for Analyze_Aspect_Dimension begin -- STEP 1: Legality of aspect if Nkind (N) /= N_Subtype_Declaration then Error_Msg_NE ("aspect& must apply to subtype declaration", N, Id); return; end if; Sub_Ind := Subtype_Indication (N); Typ := Etype (Sub_Ind); System := System_Of (Typ); if Nkind (Sub_Ind) = N_Subtype_Indication then Error_Msg_NE ("constraint not allowed with aspect&", Constraint (Sub_Ind), Id); return; end if; -- The dimension declarations are useless if the parent type does not -- declare a valid system. if not Exists (System) then Error_Msg_NE ("parent type of& lacks dimension system", Sub_Ind, Def_Id); return; end if; if Nkind (Aggr) /= N_Aggregate then Error_Msg_N ("aggregate expected", Aggr); return; end if; -- STEP 2: Symbol, Names and values extraction -- Get the number of errors detected by the compiler so far Errors_Count := Serious_Errors_Detected; -- STEP 2a: Symbol extraction -- The first entry in the aggregate may be the symbolic representation -- of the quantity. -- Positional symbol argument Symbol_Expr := First (Expressions (Aggr)); -- Named symbol argument if No (Symbol_Expr) or else not Nkind_In (Symbol_Expr, N_Character_Literal, N_String_Literal) then Symbol_Expr := Empty; -- Component associations present if Present (Component_Associations (Aggr)) then Assoc := First (Component_Associations (Aggr)); Choice := First (Choices (Assoc)); if No (Next (Choice)) and then Nkind (Choice) = N_Identifier then -- Symbol component association is present if Chars (Choice) = Name_Symbol then Num_Choices := Num_Choices + 1; Symbol_Expr := Expression (Assoc); -- Verify symbol expression is a string or a character if not Nkind_In (Symbol_Expr, N_Character_Literal, N_String_Literal) then Symbol_Expr := Empty; Error_Msg_N ("symbol expression must be character or string", Symbol_Expr); end if; -- Special error if no Symbol choice but expression is string -- or character. elsif Nkind_In (Expression (Assoc), N_Character_Literal, N_String_Literal) then Num_Choices := Num_Choices + 1; Error_Msg_N ("optional component Symbol expected, found&", Choice); end if; end if; end if; end if; -- STEP 2b: Names and values extraction -- Positional elements Expr := First (Expressions (Aggr)); -- Skip the symbol expression when present if Present (Symbol_Expr) and then Num_Choices = 0 then Expr := Next (Expr); end if; Position := Low_Position_Bound; while Present (Expr) loop if Position > High_Position_Bound then Error_Msg_N ("type& has more dimensions than system allows", Def_Id); exit; end if; Extract_Power (Expr, Position); Position := Position + 1; Num_Dimensions := Num_Dimensions + 1; Next (Expr); end loop; -- Named elements Assoc := First (Component_Associations (Aggr)); -- Skip the symbol association when present if Num_Choices = 1 then Next (Assoc); end if; while Present (Assoc) loop Expr := Expression (Assoc); Choice := First (Choices (Assoc)); while Present (Choice) loop -- Identifier case: NAME => EXPRESSION if Nkind (Choice) = N_Identifier then Position := Position_In_System (Choice, System); if Is_Invalid (Position) then Error_Msg_N ("dimension name& not part of system", Choice); else Extract_Power (Expr, Position); end if; -- Range case: NAME .. NAME => EXPRESSION elsif Nkind (Choice) = N_Range then declare Low : constant Node_Id := Low_Bound (Choice); High : constant Node_Id := High_Bound (Choice); Low_Pos : Dimension_Position; High_Pos : Dimension_Position; begin if Nkind (Low) /= N_Identifier then Error_Msg_N ("bound must denote a dimension name", Low); elsif Nkind (High) /= N_Identifier then Error_Msg_N ("bound must denote a dimension name", High); else Low_Pos := Position_In_System (Low, System); High_Pos := Position_In_System (High, System); if Is_Invalid (Low_Pos) then Error_Msg_N ("dimension name& not part of system", Low); elsif Is_Invalid (High_Pos) then Error_Msg_N ("dimension name& not part of system", High); elsif Low_Pos > High_Pos then Error_Msg_N ("expected low to high range", Choice); else for Position in Low_Pos .. High_Pos loop Extract_Power (Expr, Position); end loop; end if; end if; end; -- Others case: OTHERS => EXPRESSION elsif Nkind (Choice) = N_Others_Choice then if Present (Next (Choice)) or else Present (Prev (Choice)) then Error_Msg_N ("OTHERS must appear alone in a choice list", Choice); elsif Present (Next (Assoc)) then Error_Msg_N ("OTHERS must appear last in an aggregate", Choice); elsif Others_Seen then Error_Msg_N ("multiple OTHERS not allowed", Choice); else -- Fill the non-processed dimensions with the default value -- supplied by others. for Position in Processed'Range loop if not Processed (Position) then Extract_Power (Expr, Position); end if; end loop; end if; Others_Seen := True; -- All other cases are illegal declarations of dimension names else Error_Msg_NE ("wrong syntax for aspect&", Choice, Id); end if; Num_Choices := Num_Choices + 1; Next (Choice); end loop; Num_Dimensions := Num_Dimensions + 1; Next (Assoc); end loop; -- STEP 3: Consistency of system and dimensions if Present (First (Expressions (Aggr))) and then (First (Expressions (Aggr)) /= Symbol_Expr or else Present (Next (Symbol_Expr))) and then (Num_Choices > 1 or else (Num_Choices = 1 and then not Others_Seen)) then Error_Msg_N ("named associations cannot follow positional associations", Aggr); end if; if Num_Dimensions > System.Count then Error_Msg_N ("type& has more dimensions than system allows", Def_Id); elsif Num_Dimensions < System.Count and then not Others_Seen then Error_Msg_N ("type& has less dimensions than system allows", Def_Id); end if; -- STEP 4: Dimension symbol extraction if Present (Symbol_Expr) then if Nkind (Symbol_Expr) = N_Character_Literal then Start_String; Store_String_Char (UI_To_CC (Char_Literal_Value (Symbol_Expr))); Symbol := End_String; else Symbol := Strval (Symbol_Expr); end if; if String_Length (Symbol) = 0 then Error_Msg_N ("empty string not allowed here", Symbol_Expr); end if; end if; -- STEP 5: Storage of extracted values -- Check that no errors have been detected during the analysis if Errors_Count = Serious_Errors_Detected then -- Check for useless declaration if Symbol = No_String and then not Exists (Dimensions) then Error_Msg_N ("useless dimension declaration", Aggr); end if; if Symbol /= No_String then Set_Symbol (Def_Id, Symbol); end if; if Exists (Dimensions) then Set_Dimensions (Def_Id, Dimensions); end if; end if; end Analyze_Aspect_Dimension; ------------------------------------- -- Analyze_Aspect_Dimension_System -- ------------------------------------- -- with Dimension_System => (DIMENSION {, DIMENSION}); -- DIMENSION ::= ( -- [Unit_Name =>] IDENTIFIER, -- [Unit_Symbol =>] SYMBOL, -- [Dim_Symbol =>] SYMBOL) procedure Analyze_Aspect_Dimension_System (N : Node_Id; Id : Entity_Id; Aggr : Node_Id) is function Is_Derived_Numeric_Type (N : Node_Id) return Boolean; -- Determine whether type declaration N denotes a numeric derived type ------------------------------- -- Is_Derived_Numeric_Type -- ------------------------------- function Is_Derived_Numeric_Type (N : Node_Id) return Boolean is begin return Nkind (N) = N_Full_Type_Declaration and then Nkind (Type_Definition (N)) = N_Derived_Type_Definition and then Is_Numeric_Type (Entity (Subtype_Indication (Type_Definition (N)))); end Is_Derived_Numeric_Type; -- Local variables Assoc : Node_Id; Choice : Node_Id; Dim_Aggr : Node_Id; Dim_Symbol : Node_Id; Dim_Symbols : Symbol_Array := No_Symbols; Dim_System : System_Type := Null_System; Position : Dimension_Position := Invalid_Position; Unit_Name : Node_Id; Unit_Names : Name_Array := No_Names; Unit_Symbol : Node_Id; Unit_Symbols : Symbol_Array := No_Symbols; Errors_Count : Nat; -- Errors_Count is a count of errors detected by the compiler so far -- just before the extraction of names and symbols in the aggregate -- (Step 3). -- -- At the end of the analysis, there is a check to verify that this -- count equals Serious_Errors_Detected i.e. no errors have been -- encountered during the process. Otherwise the System_Table is -- not filled. -- Start of processing for Analyze_Aspect_Dimension_System begin -- STEP 1: Legality of aspect if not Is_Derived_Numeric_Type (N) then Error_Msg_NE ("aspect& must apply to numeric derived type declaration", N, Id); return; end if; if Nkind (Aggr) /= N_Aggregate then Error_Msg_N ("aggregate expected", Aggr); return; end if; -- STEP 2: Structural verification of the dimension aggregate if Present (Component_Associations (Aggr)) then Error_Msg_N ("expected positional aggregate", Aggr); return; end if; -- STEP 3: Name and Symbol extraction Dim_Aggr := First (Expressions (Aggr)); Errors_Count := Serious_Errors_Detected; while Present (Dim_Aggr) loop if Position = High_Position_Bound then Error_Msg_N ("too many dimensions in system", Aggr); exit; end if; Position := Position + 1; if Nkind (Dim_Aggr) /= N_Aggregate then Error_Msg_N ("aggregate expected", Dim_Aggr); else if Present (Component_Associations (Dim_Aggr)) and then Present (Expressions (Dim_Aggr)) then Error_Msg_N ("mixed positional/named aggregate not allowed here", Dim_Aggr); -- Verify each dimension aggregate has three arguments elsif List_Length (Component_Associations (Dim_Aggr)) /= 3 and then List_Length (Expressions (Dim_Aggr)) /= 3 then Error_Msg_N ("three components expected in aggregate", Dim_Aggr); else -- Named dimension aggregate if Present (Component_Associations (Dim_Aggr)) then -- Check first argument denotes the unit name Assoc := First (Component_Associations (Dim_Aggr)); Choice := First (Choices (Assoc)); Unit_Name := Expression (Assoc); if Present (Next (Choice)) or else Nkind (Choice) /= N_Identifier then Error_Msg_NE ("wrong syntax for aspect&", Choice, Id); elsif Chars (Choice) /= Name_Unit_Name then Error_Msg_N ("expected Unit_Name, found&", Choice); end if; -- Check the second argument denotes the unit symbol Next (Assoc); Choice := First (Choices (Assoc)); Unit_Symbol := Expression (Assoc); if Present (Next (Choice)) or else Nkind (Choice) /= N_Identifier then Error_Msg_NE ("wrong syntax for aspect&", Choice, Id); elsif Chars (Choice) /= Name_Unit_Symbol then Error_Msg_N ("expected Unit_Symbol, found&", Choice); end if; -- Check the third argument denotes the dimension symbol Next (Assoc); Choice := First (Choices (Assoc)); Dim_Symbol := Expression (Assoc); if Present (Next (Choice)) or else Nkind (Choice) /= N_Identifier then Error_Msg_NE ("wrong syntax for aspect&", Choice, Id); elsif Chars (Choice) /= Name_Dim_Symbol then Error_Msg_N ("expected Dim_Symbol, found&", Choice); end if; -- Positional dimension aggregate else Unit_Name := First (Expressions (Dim_Aggr)); Unit_Symbol := Next (Unit_Name); Dim_Symbol := Next (Unit_Symbol); end if; -- Check the first argument for each dimension aggregate is -- a name. if Nkind (Unit_Name) = N_Identifier then Unit_Names (Position) := Chars (Unit_Name); else Error_Msg_N ("expected unit name", Unit_Name); end if; -- Check the second argument for each dimension aggregate is -- a string or a character. if not Nkind_In (Unit_Symbol, N_String_Literal, N_Character_Literal) then Error_Msg_N ("expected unit symbol (string or character)", Unit_Symbol); else -- String case if Nkind (Unit_Symbol) = N_String_Literal then Unit_Symbols (Position) := Strval (Unit_Symbol); -- Character case else Start_String; Store_String_Char (UI_To_CC (Char_Literal_Value (Unit_Symbol))); Unit_Symbols (Position) := End_String; end if; -- Verify that the string is not empty if String_Length (Unit_Symbols (Position)) = 0 then Error_Msg_N ("empty string not allowed here", Unit_Symbol); end if; end if; -- Check the third argument for each dimension aggregate is -- a string or a character. if not Nkind_In (Dim_Symbol, N_String_Literal, N_Character_Literal) then Error_Msg_N ("expected dimension symbol (string or character)", Dim_Symbol); else -- String case if Nkind (Dim_Symbol) = N_String_Literal then Dim_Symbols (Position) := Strval (Dim_Symbol); -- Character case else Start_String; Store_String_Char (UI_To_CC (Char_Literal_Value (Dim_Symbol))); Dim_Symbols (Position) := End_String; end if; -- Verify that the string is not empty if String_Length (Dim_Symbols (Position)) = 0 then Error_Msg_N ("empty string not allowed here", Dim_Symbol); end if; end if; end if; end if; Next (Dim_Aggr); end loop; -- STEP 4: Storage of extracted values -- Check that no errors have been detected during the analysis if Errors_Count = Serious_Errors_Detected then Dim_System.Type_Decl := N; Dim_System.Unit_Names := Unit_Names; Dim_System.Unit_Symbols := Unit_Symbols; Dim_System.Dim_Symbols := Dim_Symbols; Dim_System.Count := Position; System_Table.Append (Dim_System); end if; end Analyze_Aspect_Dimension_System; ----------------------- -- Analyze_Dimension -- ----------------------- -- This dispatch routine propagates dimensions for each node procedure Analyze_Dimension (N : Node_Id) is begin -- Aspect is an Ada 2012 feature. Note that there is no need to check -- dimensions for nodes that don't come from source, except for subtype -- declarations where the dimensions are inherited from the base type, -- for explicit dereferences generated when expanding iterators, and -- for object declarations generated for inlining. if Ada_Version < Ada_2012 then return; elsif not Comes_From_Source (N) then if Nkind_In (N, N_Explicit_Dereference, N_Identifier, N_Object_Declaration, N_Subtype_Declaration) then null; else return; end if; end if; case Nkind (N) is when N_Assignment_Statement => Analyze_Dimension_Assignment_Statement (N); when N_Binary_Op => Analyze_Dimension_Binary_Op (N); when N_Case_Expression => Analyze_Dimension_Case_Expression (N); when N_Component_Declaration => Analyze_Dimension_Component_Declaration (N); when N_Extended_Return_Statement => Analyze_Dimension_Extended_Return_Statement (N); when N_Attribute_Reference | N_Expanded_Name | N_Explicit_Dereference | N_Function_Call | N_Indexed_Component | N_Qualified_Expression | N_Selected_Component | N_Slice | N_Unchecked_Type_Conversion => Analyze_Dimension_Has_Etype (N); -- In the presence of a repaired syntax error, an identifier may be -- introduced without a usable type. when N_Identifier => if Present (Etype (N)) then Analyze_Dimension_Has_Etype (N); end if; when N_If_Expression => Analyze_Dimension_If_Expression (N); when N_Number_Declaration => Analyze_Dimension_Number_Declaration (N); when N_Object_Declaration => Analyze_Dimension_Object_Declaration (N); when N_Object_Renaming_Declaration => Analyze_Dimension_Object_Renaming_Declaration (N); when N_Simple_Return_Statement => if not Comes_From_Extended_Return_Statement (N) then Analyze_Dimension_Simple_Return_Statement (N); end if; when N_Subtype_Declaration => Analyze_Dimension_Subtype_Declaration (N); when N_Type_Conversion => Analyze_Dimension_Type_Conversion (N); when N_Unary_Op => Analyze_Dimension_Unary_Op (N); when others => null; end case; end Analyze_Dimension; --------------------------------------- -- Analyze_Dimension_Array_Aggregate -- --------------------------------------- procedure Analyze_Dimension_Array_Aggregate (N : Node_Id; Comp_Typ : Entity_Id) is Comp_Ass : constant List_Id := Component_Associations (N); Dims_Of_Comp_Typ : constant Dimension_Type := Dimensions_Of (Comp_Typ); Exps : constant List_Id := Expressions (N); Comp : Node_Id; Expr : Node_Id; Error_Detected : Boolean := False; -- This flag is used in order to indicate if an error has been detected -- so far by the compiler in this routine. begin -- Aspect is an Ada 2012 feature. Nothing to do here if the component -- base type is not a dimensioned type. -- Note that here the original node must come from source since the -- original array aggregate may not have been entirely decorated. if Ada_Version < Ada_2012 or else not Comes_From_Source (Original_Node (N)) or else not Has_Dimension_System (Base_Type (Comp_Typ)) then return; end if; -- Check whether there is any positional component association if Is_Empty_List (Exps) then Comp := First (Comp_Ass); else Comp := First (Exps); end if; while Present (Comp) loop -- Get the expression from the component if Nkind (Comp) = N_Component_Association then Expr := Expression (Comp); else Expr := Comp; end if; -- Issue an error if the dimensions of the component type and the -- dimensions of the component mismatch. -- Note that we must ensure the expression has been fully analyzed -- since it may not be decorated at this point. We also don't want to -- issue the same error message multiple times on the same expression -- (may happen when an aggregate is converted into a positional -- aggregate). We also must verify that this is a scalar component, -- and not a subaggregate of a multidimensional aggregate. if Comes_From_Source (Original_Node (Expr)) and then Present (Etype (Expr)) and then Is_Numeric_Type (Etype (Expr)) and then Dimensions_Of (Expr) /= Dims_Of_Comp_Typ and then Sloc (Comp) /= Sloc (Prev (Comp)) then -- Check if an error has already been encountered so far if not Error_Detected then Error_Msg_N ("dimensions mismatch in array aggregate", N); Error_Detected := True; end if; Error_Msg_N ("\expected dimension " & Dimensions_Msg_Of (Comp_Typ) & ", found " & Dimensions_Msg_Of (Expr), Expr); end if; -- Look at the named components right after the positional components if not Present (Next (Comp)) and then List_Containing (Comp) = Exps then Comp := First (Comp_Ass); else Next (Comp); end if; end loop; end Analyze_Dimension_Array_Aggregate; -------------------------------------------- -- Analyze_Dimension_Assignment_Statement -- -------------------------------------------- procedure Analyze_Dimension_Assignment_Statement (N : Node_Id) is Lhs : constant Node_Id := Name (N); Dims_Of_Lhs : constant Dimension_Type := Dimensions_Of (Lhs); Rhs : constant Node_Id := Expression (N); Dims_Of_Rhs : constant Dimension_Type := Dimensions_Of (Rhs); procedure Error_Dim_Msg_For_Assignment_Statement (N : Node_Id; Lhs : Node_Id; Rhs : Node_Id); -- Error using Error_Msg_N at node N. Output the dimensions of left -- and right hand sides. -------------------------------------------- -- Error_Dim_Msg_For_Assignment_Statement -- -------------------------------------------- procedure Error_Dim_Msg_For_Assignment_Statement (N : Node_Id; Lhs : Node_Id; Rhs : Node_Id) is begin Error_Msg_N ("dimensions mismatch in assignment", N); Error_Msg_N ("\left-hand side " & Dimensions_Msg_Of (Lhs, True), N); Error_Msg_N ("\right-hand side " & Dimensions_Msg_Of (Rhs, True), N); end Error_Dim_Msg_For_Assignment_Statement; -- Start of processing for Analyze_Dimension_Assignment begin if Dims_Of_Lhs /= Dims_Of_Rhs then Error_Dim_Msg_For_Assignment_Statement (N, Lhs, Rhs); end if; end Analyze_Dimension_Assignment_Statement; --------------------------------- -- Analyze_Dimension_Binary_Op -- --------------------------------- -- Check and propagate the dimensions for binary operators -- Note that when the dimensions mismatch, no dimension is propagated to N. procedure Analyze_Dimension_Binary_Op (N : Node_Id) is N_Kind : constant Node_Kind := Nkind (N); function Dimensions_Of_Operand (N : Node_Id) return Dimension_Type; -- If the operand is a numeric literal that comes from a declared -- constant, use the dimensions of the constant which were computed -- from the expression of the constant declaration. Otherwise the -- dimensions are those of the operand, or the type of the operand. -- This takes care of node rewritings from validity checks, where the -- dimensions of the operand itself may not be preserved, while the -- type comes from context and must have dimension information. procedure Error_Dim_Msg_For_Binary_Op (N, L, R : Node_Id); -- Error using Error_Msg_NE and Error_Msg_N at node N. Output the -- dimensions of both operands. --------------------------- -- Dimensions_Of_Operand -- --------------------------- function Dimensions_Of_Operand (N : Node_Id) return Dimension_Type is Dims : constant Dimension_Type := Dimensions_Of (N); begin if Exists (Dims) then return Dims; elsif Is_Entity_Name (N) then return Dimensions_Of (Etype (Entity (N))); elsif Nkind (N) = N_Real_Literal then if Present (Original_Entity (N)) then return Dimensions_Of (Original_Entity (N)); else return Dimensions_Of (Etype (N)); end if; -- Otherwise return the default dimensions else return Dims; end if; end Dimensions_Of_Operand; --------------------------------- -- Error_Dim_Msg_For_Binary_Op -- --------------------------------- procedure Error_Dim_Msg_For_Binary_Op (N, L, R : Node_Id) is begin Error_Msg_NE ("both operands for operation& must have same dimensions", N, Entity (N)); Error_Msg_N ("\left operand " & Dimensions_Msg_Of (L, True), N); Error_Msg_N ("\right operand " & Dimensions_Msg_Of (R, True), N); end Error_Dim_Msg_For_Binary_Op; -- Start of processing for Analyze_Dimension_Binary_Op begin -- If the node is already analyzed, do not examine the operands. At the -- end of the analysis their dimensions have been removed, and the node -- itself may have been rewritten. if Analyzed (N) then return; end if; if Nkind_In (N_Kind, N_Op_Add, N_Op_Expon, N_Op_Subtract) or else N_Kind in N_Multiplying_Operator or else N_Kind in N_Op_Compare then declare L : constant Node_Id := Left_Opnd (N); Dims_Of_L : constant Dimension_Type := Dimensions_Of_Operand (L); L_Has_Dimensions : constant Boolean := Exists (Dims_Of_L); R : constant Node_Id := Right_Opnd (N); Dims_Of_R : constant Dimension_Type := Dimensions_Of_Operand (R); R_Has_Dimensions : constant Boolean := Exists (Dims_Of_R); Dims_Of_N : Dimension_Type := Null_Dimension; begin -- N_Op_Add, N_Op_Mod, N_Op_Rem or N_Op_Subtract case if Nkind_In (N, N_Op_Add, N_Op_Mod, N_Op_Rem, N_Op_Subtract) then -- Check both operands have same dimension if Dims_Of_L /= Dims_Of_R then Error_Dim_Msg_For_Binary_Op (N, L, R); else -- Check both operands are not dimensionless if Exists (Dims_Of_L) then Set_Dimensions (N, Dims_Of_L); end if; end if; -- N_Op_Multiply or N_Op_Divide case elsif Nkind_In (N_Kind, N_Op_Multiply, N_Op_Divide) then -- Check at least one operand is not dimensionless if L_Has_Dimensions or R_Has_Dimensions then -- Multiplication case -- Get both operands dimensions and add them if N_Kind = N_Op_Multiply then for Position in Dimension_Type'Range loop Dims_Of_N (Position) := Dims_Of_L (Position) + Dims_Of_R (Position); end loop; -- Division case -- Get both operands dimensions and subtract them else for Position in Dimension_Type'Range loop Dims_Of_N (Position) := Dims_Of_L (Position) - Dims_Of_R (Position); end loop; end if; if Exists (Dims_Of_N) then Set_Dimensions (N, Dims_Of_N); end if; end if; -- Exponentiation case -- Note: a rational exponent is allowed for dimensioned operand elsif N_Kind = N_Op_Expon then -- Check the left operand is not dimensionless. Note that the -- value of the exponent must be known compile time. Otherwise, -- the exponentiation evaluation will return an error message. if L_Has_Dimensions then if not Compile_Time_Known_Value (R) then Error_Msg_N ("exponent of dimensioned operand must be " & "known at compile time", N); end if; declare Exponent_Value : Rational := Zero; begin -- Real operand case if Is_Real_Type (Etype (L)) then -- Define the exponent as a Rational number Exponent_Value := Create_Rational_From (R, False); -- Verify that the exponent cannot be interpreted -- as a rational, otherwise interpret the exponent -- as an integer. if Exponent_Value = No_Rational then Exponent_Value := +Whole (UI_To_Int (Expr_Value (R))); end if; -- Integer operand case. -- For integer operand, the exponent cannot be -- interpreted as a rational. else Exponent_Value := +Whole (UI_To_Int (Expr_Value (R))); end if; for Position in Dimension_Type'Range loop Dims_Of_N (Position) := Dims_Of_L (Position) * Exponent_Value; end loop; if Exists (Dims_Of_N) then Set_Dimensions (N, Dims_Of_N); end if; end; end if; -- Comparison cases -- For relational operations, only dimension checking is -- performed (no propagation). If one operand is the result -- of constant folding the dimensions may have been lost -- in a tree copy, so assume that preanalysis has verified -- that dimensions are correct. elsif N_Kind in N_Op_Compare then if (L_Has_Dimensions or R_Has_Dimensions) and then Dims_Of_L /= Dims_Of_R then if Nkind (L) = N_Real_Literal and then not (Comes_From_Source (L)) and then Expander_Active then null; elsif Nkind (R) = N_Real_Literal and then not (Comes_From_Source (R)) and then Expander_Active then null; -- Numeric literal case. Issue a warning to indicate the -- literal is treated as if its dimension matches the type -- dimension. elsif Nkind_In (Original_Node (L), N_Integer_Literal, N_Real_Literal) then Dim_Warning_For_Numeric_Literal (L, Etype (R)); elsif Nkind_In (Original_Node (R), N_Integer_Literal, N_Real_Literal) then Dim_Warning_For_Numeric_Literal (R, Etype (L)); else Error_Dim_Msg_For_Binary_Op (N, L, R); end if; end if; end if; -- If expander is active, remove dimension information from each -- operand, as only dimensions of result are relevant. if Expander_Active then Remove_Dimensions (L); Remove_Dimensions (R); end if; end; end if; end Analyze_Dimension_Binary_Op; ---------------------------- -- Analyze_Dimension_Call -- ---------------------------- procedure Analyze_Dimension_Call (N : Node_Id; Nam : Entity_Id) is Actuals : constant List_Id := Parameter_Associations (N); Actual : Node_Id; Dims_Of_Formal : Dimension_Type; Formal : Node_Id; Formal_Typ : Entity_Id; Error_Detected : Boolean := False; -- This flag is used in order to indicate if an error has been detected -- so far by the compiler in this routine. begin -- Aspect is an Ada 2012 feature. Note that there is no need to check -- dimensions for calls that don't come from source, or those that may -- have semantic errors. if Ada_Version < Ada_2012 or else not Comes_From_Source (N) or else Error_Posted (N) then return; end if; -- Check the dimensions of the actuals, if any if not Is_Empty_List (Actuals) then -- Special processing for elementary functions -- For Sqrt call, the resulting dimensions equal to half the -- dimensions of the actual. For all other elementary calls, this -- routine check that every actual is dimensionless. if Nkind (N) = N_Function_Call then Elementary_Function_Calls : declare Dims_Of_Call : Dimension_Type; Ent : Entity_Id := Nam; function Is_Elementary_Function_Entity (Sub_Id : Entity_Id) return Boolean; -- Given Sub_Id, the original subprogram entity, return True -- if call is to an elementary function (see Ada.Numerics. -- Generic_Elementary_Functions). ----------------------------------- -- Is_Elementary_Function_Entity -- ----------------------------------- function Is_Elementary_Function_Entity (Sub_Id : Entity_Id) return Boolean is Loc : constant Source_Ptr := Sloc (Sub_Id); begin -- Is entity in Ada.Numerics.Generic_Elementary_Functions? return Loc > No_Location and then Is_RTU (Cunit_Entity (Get_Source_Unit (Loc)), Ada_Numerics_Generic_Elementary_Functions); end Is_Elementary_Function_Entity; -- Start of processing for Elementary_Function_Calls begin -- Get original subprogram entity following the renaming chain if Present (Alias (Ent)) then Ent := Alias (Ent); end if; -- Check the call is an Elementary function call if Is_Elementary_Function_Entity (Ent) then -- Sqrt function call case if Chars (Ent) = Name_Sqrt then Dims_Of_Call := Dimensions_Of (First_Actual (N)); -- Evaluates the resulting dimensions (i.e. half the -- dimensions of the actual). if Exists (Dims_Of_Call) then for Position in Dims_Of_Call'Range loop Dims_Of_Call (Position) := Dims_Of_Call (Position) * Rational'(Numerator => 1, Denominator => 2); end loop; Set_Dimensions (N, Dims_Of_Call); end if; -- All other elementary functions case. Note that every -- actual here should be dimensionless. else Actual := First_Actual (N); while Present (Actual) loop if Exists (Dimensions_Of (Actual)) then -- Check if error has already been encountered if not Error_Detected then Error_Msg_NE ("dimensions mismatch in call of&", N, Name (N)); Error_Detected := True; end if; Error_Msg_N ("\expected dimension '['], found " & Dimensions_Msg_Of (Actual), Actual); end if; Next_Actual (Actual); end loop; end if; -- Nothing more to do for elementary functions return; end if; end Elementary_Function_Calls; end if; -- General case. Check, for each parameter, the dimensions of the -- actual and its corresponding formal match. Otherwise, complain. Actual := First_Actual (N); Formal := First_Formal (Nam); while Present (Formal) loop -- A missing corresponding actual indicates that the analysis of -- the call was aborted due to a previous error. if No (Actual) then Check_Error_Detected; return; end if; Formal_Typ := Etype (Formal); Dims_Of_Formal := Dimensions_Of (Formal_Typ); -- If the formal is not dimensionless, check dimensions of formal -- and actual match. Otherwise, complain. if Exists (Dims_Of_Formal) and then Dimensions_Of (Actual) /= Dims_Of_Formal then -- Check if an error has already been encountered so far if not Error_Detected then Error_Msg_NE ("dimensions mismatch in& call", N, Name (N)); Error_Detected := True; end if; Error_Msg_N ("\expected dimension " & Dimensions_Msg_Of (Formal_Typ) & ", found " & Dimensions_Msg_Of (Actual), Actual); end if; Next_Actual (Actual); Next_Formal (Formal); end loop; end if; -- For function calls, propagate the dimensions from the returned type if Nkind (N) = N_Function_Call then Analyze_Dimension_Has_Etype (N); end if; end Analyze_Dimension_Call; --------------------------------------- -- Analyze_Dimension_Case_Expression -- --------------------------------------- procedure Analyze_Dimension_Case_Expression (N : Node_Id) is Frst : constant Node_Id := First (Alternatives (N)); Frst_Expr : constant Node_Id := Expression (Frst); Dims : constant Dimension_Type := Dimensions_Of (Frst_Expr); Alt : Node_Id; begin Alt := Next (Frst); while Present (Alt) loop if Dimensions_Of (Expression (Alt)) /= Dims then Error_Msg_N ("dimension mismatch in case expression", Alt); exit; end if; Next (Alt); end loop; Copy_Dimensions (Frst_Expr, N); end Analyze_Dimension_Case_Expression; --------------------------------------------- -- Analyze_Dimension_Component_Declaration -- --------------------------------------------- procedure Analyze_Dimension_Component_Declaration (N : Node_Id) is Expr : constant Node_Id := Expression (N); Id : constant Entity_Id := Defining_Identifier (N); Etyp : constant Entity_Id := Etype (Id); Dims_Of_Etyp : constant Dimension_Type := Dimensions_Of (Etyp); Dims_Of_Expr : Dimension_Type; procedure Error_Dim_Msg_For_Component_Declaration (N : Node_Id; Etyp : Entity_Id; Expr : Node_Id); -- Error using Error_Msg_N at node N. Output the dimensions of the -- type Etyp and the expression Expr of N. --------------------------------------------- -- Error_Dim_Msg_For_Component_Declaration -- --------------------------------------------- procedure Error_Dim_Msg_For_Component_Declaration (N : Node_Id; Etyp : Entity_Id; Expr : Node_Id) is begin Error_Msg_N ("dimensions mismatch in component declaration", N); Error_Msg_N ("\expected dimension " & Dimensions_Msg_Of (Etyp) & ", found " & Dimensions_Msg_Of (Expr), Expr); end Error_Dim_Msg_For_Component_Declaration; -- Start of processing for Analyze_Dimension_Component_Declaration begin -- Expression is present if Present (Expr) then Dims_Of_Expr := Dimensions_Of (Expr); -- Check dimensions match if Dims_Of_Etyp /= Dims_Of_Expr then -- Numeric literal case. Issue a warning if the object type is not -- dimensionless to indicate the literal is treated as if its -- dimension matches the type dimension. if Nkind_In (Original_Node (Expr), N_Real_Literal, N_Integer_Literal) then Dim_Warning_For_Numeric_Literal (Expr, Etyp); -- Issue a dimension mismatch error for all other cases else Error_Dim_Msg_For_Component_Declaration (N, Etyp, Expr); end if; end if; end if; end Analyze_Dimension_Component_Declaration; ------------------------------------------------- -- Analyze_Dimension_Extended_Return_Statement -- ------------------------------------------------- procedure Analyze_Dimension_Extended_Return_Statement (N : Node_Id) is Return_Ent : constant Entity_Id := Return_Statement_Entity (N); Return_Etyp : constant Entity_Id := Etype (Return_Applies_To (Return_Ent)); Return_Obj_Decls : constant List_Id := Return_Object_Declarations (N); Return_Obj_Decl : Node_Id; Return_Obj_Id : Entity_Id; Return_Obj_Typ : Entity_Id; procedure Error_Dim_Msg_For_Extended_Return_Statement (N : Node_Id; Return_Etyp : Entity_Id; Return_Obj_Typ : Entity_Id); -- Error using Error_Msg_N at node N. Output dimensions of the returned -- type Return_Etyp and the returned object type Return_Obj_Typ of N. ------------------------------------------------- -- Error_Dim_Msg_For_Extended_Return_Statement -- ------------------------------------------------- procedure Error_Dim_Msg_For_Extended_Return_Statement (N : Node_Id; Return_Etyp : Entity_Id; Return_Obj_Typ : Entity_Id) is begin Error_Msg_N ("dimensions mismatch in extended return statement", N); Error_Msg_N ("\expected dimension " & Dimensions_Msg_Of (Return_Etyp) & ", found " & Dimensions_Msg_Of (Return_Obj_Typ), N); end Error_Dim_Msg_For_Extended_Return_Statement; -- Start of processing for Analyze_Dimension_Extended_Return_Statement begin if Present (Return_Obj_Decls) then Return_Obj_Decl := First (Return_Obj_Decls); while Present (Return_Obj_Decl) loop if Nkind (Return_Obj_Decl) = N_Object_Declaration then Return_Obj_Id := Defining_Identifier (Return_Obj_Decl); if Is_Return_Object (Return_Obj_Id) then Return_Obj_Typ := Etype (Return_Obj_Id); -- Issue an error message if dimensions mismatch if Dimensions_Of (Return_Etyp) /= Dimensions_Of (Return_Obj_Typ) then Error_Dim_Msg_For_Extended_Return_Statement (N, Return_Etyp, Return_Obj_Typ); return; end if; end if; end if; Next (Return_Obj_Decl); end loop; end if; end Analyze_Dimension_Extended_Return_Statement; ----------------------------------------------------- -- Analyze_Dimension_Extension_Or_Record_Aggregate -- ----------------------------------------------------- procedure Analyze_Dimension_Extension_Or_Record_Aggregate (N : Node_Id) is Comp : Node_Id; Comp_Id : Entity_Id; Comp_Typ : Entity_Id; Expr : Node_Id; Error_Detected : Boolean := False; -- This flag is used in order to indicate if an error has been detected -- so far by the compiler in this routine. begin -- Aspect is an Ada 2012 feature. Note that there is no need to check -- dimensions for aggregates that don't come from source, or if we are -- within an initialization procedure, whose expressions have been -- checked at the point of record declaration. if Ada_Version < Ada_2012 or else not Comes_From_Source (N) or else Inside_Init_Proc then return; end if; Comp := First (Component_Associations (N)); while Present (Comp) loop Comp_Id := Entity (First (Choices (Comp))); Comp_Typ := Etype (Comp_Id); -- Check the component type is either a dimensioned type or a -- dimensioned subtype. if Has_Dimension_System (Base_Type (Comp_Typ)) then Expr := Expression (Comp); -- A box-initialized component needs no checking. if No (Expr) and then Box_Present (Comp) then null; -- Issue an error if the dimensions of the component type and the -- dimensions of the component mismatch. elsif Dimensions_Of (Expr) /= Dimensions_Of (Comp_Typ) then -- Check if an error has already been encountered so far if not Error_Detected then -- Extension aggregate case if Nkind (N) = N_Extension_Aggregate then Error_Msg_N ("dimensions mismatch in extension aggregate", N); -- Record aggregate case else Error_Msg_N ("dimensions mismatch in record aggregate", N); end if; Error_Detected := True; end if; Error_Msg_N ("\expected dimension " & Dimensions_Msg_Of (Comp_Typ) & ", found " & Dimensions_Msg_Of (Expr), Comp); end if; end if; Next (Comp); end loop; end Analyze_Dimension_Extension_Or_Record_Aggregate; ------------------------------- -- Analyze_Dimension_Formals -- ------------------------------- procedure Analyze_Dimension_Formals (N : Node_Id; Formals : List_Id) is Dims_Of_Typ : Dimension_Type; Formal : Node_Id; Typ : Entity_Id; begin -- Aspect is an Ada 2012 feature. Note that there is no need to check -- dimensions for sub specs that don't come from source. if Ada_Version < Ada_2012 or else not Comes_From_Source (N) then return; end if; Formal := First (Formals); while Present (Formal) loop Typ := Parameter_Type (Formal); Dims_Of_Typ := Dimensions_Of (Typ); if Exists (Dims_Of_Typ) then declare Expr : constant Node_Id := Expression (Formal); begin -- Issue a warning if Expr is a numeric literal and if its -- dimensions differ with the dimensions of the formal type. if Present (Expr) and then Dims_Of_Typ /= Dimensions_Of (Expr) and then Nkind_In (Original_Node (Expr), N_Real_Literal, N_Integer_Literal) then Dim_Warning_For_Numeric_Literal (Expr, Etype (Typ)); end if; end; end if; Next (Formal); end loop; end Analyze_Dimension_Formals; --------------------------------- -- Analyze_Dimension_Has_Etype -- --------------------------------- procedure Analyze_Dimension_Has_Etype (N : Node_Id) is Etyp : constant Entity_Id := Etype (N); Dims_Of_Etyp : Dimension_Type := Dimensions_Of (Etyp); begin -- General case. Propagation of the dimensions from the type if Exists (Dims_Of_Etyp) then Set_Dimensions (N, Dims_Of_Etyp); -- Identifier case. Propagate the dimensions from the entity for -- identifier whose entity is a non-dimensionless constant. elsif Nkind (N) = N_Identifier then Analyze_Dimension_Identifier : declare Id : constant Entity_Id := Entity (N); begin -- If Id is missing, abnormal tree, assume previous error if No (Id) then Check_Error_Detected; return; elsif Ekind_In (Id, E_Constant, E_Named_Real) and then Exists (Dimensions_Of (Id)) then Set_Dimensions (N, Dimensions_Of (Id)); end if; end Analyze_Dimension_Identifier; -- Attribute reference case. Propagate the dimensions from the prefix. elsif Nkind (N) = N_Attribute_Reference and then Has_Dimension_System (Base_Type (Etyp)) then Dims_Of_Etyp := Dimensions_Of (Prefix (N)); -- Check the prefix is not dimensionless if Exists (Dims_Of_Etyp) then Set_Dimensions (N, Dims_Of_Etyp); end if; end if; -- Remove dimensions from inner expressions, to prevent dimensions -- table from growing uselessly. case Nkind (N) is when N_Attribute_Reference | N_Indexed_Component => declare Exprs : constant List_Id := Expressions (N); Expr : Node_Id; begin if Present (Exprs) then Expr := First (Exprs); while Present (Expr) loop Remove_Dimensions (Expr); Next (Expr); end loop; end if; end; when N_Qualified_Expression | N_Type_Conversion | N_Unchecked_Type_Conversion => Remove_Dimensions (Expression (N)); when N_Selected_Component => Remove_Dimensions (Selector_Name (N)); when others => null; end case; end Analyze_Dimension_Has_Etype; ------------------------------------- -- Analyze_Dimension_If_Expression -- ------------------------------------- procedure Analyze_Dimension_If_Expression (N : Node_Id) is Then_Expr : constant Node_Id := Next (First (Expressions (N))); Else_Expr : constant Node_Id := Next (Then_Expr); begin if Dimensions_Of (Then_Expr) /= Dimensions_Of (Else_Expr) then Error_Msg_N ("dimensions mismatch in conditional expression", N); else Copy_Dimensions (Then_Expr, N); end if; end Analyze_Dimension_If_Expression; ------------------------------------------ -- Analyze_Dimension_Number_Declaration -- ------------------------------------------ procedure Analyze_Dimension_Number_Declaration (N : Node_Id) is Expr : constant Node_Id := Expression (N); Id : constant Entity_Id := Defining_Identifier (N); Dim_Of_Expr : constant Dimension_Type := Dimensions_Of (Expr); begin if Exists (Dim_Of_Expr) then Set_Dimensions (Id, Dim_Of_Expr); Set_Etype (Id, Etype (Expr)); end if; end Analyze_Dimension_Number_Declaration; ------------------------------------------ -- Analyze_Dimension_Object_Declaration -- ------------------------------------------ procedure Analyze_Dimension_Object_Declaration (N : Node_Id) is Expr : constant Node_Id := Expression (N); Id : constant Entity_Id := Defining_Identifier (N); Etyp : constant Entity_Id := Etype (Id); Dim_Of_Etyp : constant Dimension_Type := Dimensions_Of (Etyp); Dim_Of_Expr : Dimension_Type; procedure Error_Dim_Msg_For_Object_Declaration (N : Node_Id; Etyp : Entity_Id; Expr : Node_Id); -- Error using Error_Msg_N at node N. Output the dimensions of the -- type Etyp and of the expression Expr. ------------------------------------------ -- Error_Dim_Msg_For_Object_Declaration -- ------------------------------------------ procedure Error_Dim_Msg_For_Object_Declaration (N : Node_Id; Etyp : Entity_Id; Expr : Node_Id) is begin Error_Msg_N ("dimensions mismatch in object declaration", N); Error_Msg_N ("\expected dimension " & Dimensions_Msg_Of (Etyp) & ", found " & Dimensions_Msg_Of (Expr), Expr); end Error_Dim_Msg_For_Object_Declaration; -- Start of processing for Analyze_Dimension_Object_Declaration begin -- Expression is present if Present (Expr) then Dim_Of_Expr := Dimensions_Of (Expr); -- Check dimensions match if Dim_Of_Expr /= Dim_Of_Etyp then -- Numeric literal case. Issue a warning if the object type is -- not dimensionless to indicate the literal is treated as if -- its dimension matches the type dimension. if Nkind_In (Original_Node (Expr), N_Real_Literal, N_Integer_Literal) then Dim_Warning_For_Numeric_Literal (Expr, Etyp); -- Case of object is a constant whose type is a dimensioned type elsif Constant_Present (N) and then not Exists (Dim_Of_Etyp) then -- Propagate dimension from expression to object entity Set_Dimensions (Id, Dim_Of_Expr); -- Expression may have been constant-folded. If nominal type has -- dimensions, verify that expression has same type. elsif Exists (Dim_Of_Etyp) and then Etype (Expr) = Etyp then null; -- For all other cases, issue an error message else Error_Dim_Msg_For_Object_Declaration (N, Etyp, Expr); end if; end if; -- Remove dimensions in expression after checking consistency with -- given type. Remove_Dimensions (Expr); end if; end Analyze_Dimension_Object_Declaration; --------------------------------------------------- -- Analyze_Dimension_Object_Renaming_Declaration -- --------------------------------------------------- procedure Analyze_Dimension_Object_Renaming_Declaration (N : Node_Id) is Renamed_Name : constant Node_Id := Name (N); Sub_Mark : constant Node_Id := Subtype_Mark (N); procedure Error_Dim_Msg_For_Object_Renaming_Declaration (N : Node_Id; Sub_Mark : Node_Id; Renamed_Name : Node_Id); -- Error using Error_Msg_N at node N. Output the dimensions of -- Sub_Mark and of Renamed_Name. --------------------------------------------------- -- Error_Dim_Msg_For_Object_Renaming_Declaration -- --------------------------------------------------- procedure Error_Dim_Msg_For_Object_Renaming_Declaration (N : Node_Id; Sub_Mark : Node_Id; Renamed_Name : Node_Id) is begin Error_Msg_N ("dimensions mismatch in object renaming declaration", N); Error_Msg_N ("\expected dimension " & Dimensions_Msg_Of (Sub_Mark) & ", found " & Dimensions_Msg_Of (Renamed_Name), Renamed_Name); end Error_Dim_Msg_For_Object_Renaming_Declaration; -- Start of processing for Analyze_Dimension_Object_Renaming_Declaration begin if Dimensions_Of (Renamed_Name) /= Dimensions_Of (Sub_Mark) then Error_Dim_Msg_For_Object_Renaming_Declaration (N, Sub_Mark, Renamed_Name); end if; end Analyze_Dimension_Object_Renaming_Declaration; ----------------------------------------------- -- Analyze_Dimension_Simple_Return_Statement -- ----------------------------------------------- procedure Analyze_Dimension_Simple_Return_Statement (N : Node_Id) is Expr : constant Node_Id := Expression (N); Return_Ent : constant Entity_Id := Return_Statement_Entity (N); Return_Etyp : constant Entity_Id := Etype (Return_Applies_To (Return_Ent)); Dims_Of_Return_Etyp : constant Dimension_Type := Dimensions_Of (Return_Etyp); procedure Error_Dim_Msg_For_Simple_Return_Statement (N : Node_Id; Return_Etyp : Entity_Id; Expr : Node_Id); -- Error using Error_Msg_N at node N. Output the dimensions of the -- returned type Return_Etyp and the returned expression Expr of N. ----------------------------------------------- -- Error_Dim_Msg_For_Simple_Return_Statement -- ----------------------------------------------- procedure Error_Dim_Msg_For_Simple_Return_Statement (N : Node_Id; Return_Etyp : Entity_Id; Expr : Node_Id) is begin Error_Msg_N ("dimensions mismatch in return statement", N); Error_Msg_N ("\expected dimension " & Dimensions_Msg_Of (Return_Etyp) & ", found " & Dimensions_Msg_Of (Expr), Expr); end Error_Dim_Msg_For_Simple_Return_Statement; -- Start of processing for Analyze_Dimension_Simple_Return_Statement begin if Dims_Of_Return_Etyp /= Dimensions_Of (Expr) then Error_Dim_Msg_For_Simple_Return_Statement (N, Return_Etyp, Expr); Remove_Dimensions (Expr); end if; end Analyze_Dimension_Simple_Return_Statement; ------------------------------------------- -- Analyze_Dimension_Subtype_Declaration -- ------------------------------------------- procedure Analyze_Dimension_Subtype_Declaration (N : Node_Id) is Id : constant Entity_Id := Defining_Identifier (N); Dims_Of_Id : constant Dimension_Type := Dimensions_Of (Id); Dims_Of_Etyp : Dimension_Type; Etyp : Node_Id; begin -- No constraint case in subtype declaration if Nkind (Subtype_Indication (N)) /= N_Subtype_Indication then Etyp := Etype (Subtype_Indication (N)); Dims_Of_Etyp := Dimensions_Of (Etyp); if Exists (Dims_Of_Etyp) then -- If subtype already has a dimension (from Aspect_Dimension), it -- cannot inherit different dimensions from its subtype. if Exists (Dims_Of_Id) and then Dims_Of_Etyp /= Dims_Of_Id then Error_Msg_NE ("subtype& already " & Dimensions_Msg_Of (Id, True), N, Id); else Set_Dimensions (Id, Dims_Of_Etyp); Set_Symbol (Id, Symbol_Of (Etyp)); end if; end if; -- Constraint present in subtype declaration else Etyp := Etype (Subtype_Mark (Subtype_Indication (N))); Dims_Of_Etyp := Dimensions_Of (Etyp); if Exists (Dims_Of_Etyp) then Set_Dimensions (Id, Dims_Of_Etyp); Set_Symbol (Id, Symbol_Of (Etyp)); end if; end if; end Analyze_Dimension_Subtype_Declaration; --------------------------------------- -- Analyze_Dimension_Type_Conversion -- --------------------------------------- procedure Analyze_Dimension_Type_Conversion (N : Node_Id) is Expr_Root : constant Entity_Id := Dimension_System_Root (Etype (Expression (N))); Target_Root : constant Entity_Id := Dimension_System_Root (Etype (N)); begin -- If the expression has dimensions and the target type has dimensions, -- the conversion has the dimensions of the expression. Consistency is -- checked below. Converting to a non-dimensioned type such as Float -- ignores the dimensions of the expression. if Exists (Dimensions_Of (Expression (N))) and then Present (Target_Root) then Set_Dimensions (N, Dimensions_Of (Expression (N))); -- Otherwise the dimensions are those of the target type. else Analyze_Dimension_Has_Etype (N); end if; -- A conversion between types in different dimension systems (e.g. MKS -- and British units) must respect the dimensions of expression and -- type, It is up to the user to provide proper conversion factors. -- Upward conversions to root type of a dimensioned system are legal, -- and correspond to "view conversions", i.e. preserve the dimensions -- of the expression; otherwise conversion must be between types with -- then same dimensions. Conversions to a non-dimensioned type such as -- Float lose the dimensions of the expression. if Present (Expr_Root) and then Present (Target_Root) and then Etype (N) /= Target_Root and then Dimensions_Of (Expression (N)) /= Dimensions_Of (Etype (N)) then Error_Msg_N ("dimensions mismatch in conversion", N); Error_Msg_N ("\expression " & Dimensions_Msg_Of (Expression (N), True), N); Error_Msg_N ("\target type " & Dimensions_Msg_Of (Etype (N), True), N); end if; end Analyze_Dimension_Type_Conversion; -------------------------------- -- Analyze_Dimension_Unary_Op -- -------------------------------- procedure Analyze_Dimension_Unary_Op (N : Node_Id) is begin case Nkind (N) is -- Propagate the dimension if the operand is not dimensionless when N_Op_Abs | N_Op_Minus | N_Op_Plus => declare R : constant Node_Id := Right_Opnd (N); begin Move_Dimensions (R, N); end; when others => null; end case; end Analyze_Dimension_Unary_Op; --------------------------------- -- Check_Expression_Dimensions -- --------------------------------- procedure Check_Expression_Dimensions (Expr : Node_Id; Typ : Entity_Id) is begin if Is_Floating_Point_Type (Etype (Expr)) then Analyze_Dimension (Expr); if Dimensions_Of (Expr) /= Dimensions_Of (Typ) then Error_Msg_N ("dimensions mismatch in array aggregate", Expr); Error_Msg_N ("\expected dimension " & Dimensions_Msg_Of (Typ) & ", found " & Dimensions_Msg_Of (Expr), Expr); end if; end if; end Check_Expression_Dimensions; --------------------- -- Copy_Dimensions -- --------------------- procedure Copy_Dimensions (From : Node_Id; To : Node_Id) is Dims_Of_From : constant Dimension_Type := Dimensions_Of (From); begin -- Ignore if not Ada 2012 or beyond if Ada_Version < Ada_2012 then return; -- For Ada 2012, Copy the dimension of 'From to 'To' elsif Exists (Dims_Of_From) then Set_Dimensions (To, Dims_Of_From); end if; end Copy_Dimensions; ----------------------------------- -- Copy_Dimensions_Of_Components -- ----------------------------------- procedure Copy_Dimensions_Of_Components (Rec : Entity_Id) is C : Entity_Id; begin C := First_Component (Rec); while Present (C) loop if Nkind (Parent (C)) = N_Component_Declaration then Copy_Dimensions (Expression (Parent (Corresponding_Record_Component (C))), Expression (Parent (C))); end if; Next_Component (C); end loop; end Copy_Dimensions_Of_Components; -------------------------- -- Create_Rational_From -- -------------------------- -- RATIONAL ::= [-] NUMERAL [/ NUMERAL] -- A rational number is a number that can be expressed as the quotient or -- fraction a/b of two integers, where b is non-zero positive. function Create_Rational_From (Expr : Node_Id; Complain : Boolean) return Rational is Or_Node_Of_Expr : constant Node_Id := Original_Node (Expr); Result : Rational := No_Rational; function Process_Minus (N : Node_Id) return Rational; -- Create a rational from a N_Op_Minus node function Process_Divide (N : Node_Id) return Rational; -- Create a rational from a N_Op_Divide node function Process_Literal (N : Node_Id) return Rational; -- Create a rational from a N_Integer_Literal node ------------------- -- Process_Minus -- ------------------- function Process_Minus (N : Node_Id) return Rational is Right : constant Node_Id := Original_Node (Right_Opnd (N)); Result : Rational; begin -- Operand is an integer literal if Nkind (Right) = N_Integer_Literal then Result := -Process_Literal (Right); -- Operand is a divide operator elsif Nkind (Right) = N_Op_Divide then Result := -Process_Divide (Right); else Result := No_Rational; end if; -- Provide minimal semantic information on dimension expressions, -- even though they have no run-time existence. This is for use by -- ASIS tools, in particular pretty-printing. If generating code -- standard operator resolution will take place. if ASIS_Mode then Set_Entity (N, Standard_Op_Minus); Set_Etype (N, Standard_Integer); end if; return Result; end Process_Minus; -------------------- -- Process_Divide -- -------------------- function Process_Divide (N : Node_Id) return Rational is Left : constant Node_Id := Original_Node (Left_Opnd (N)); Right : constant Node_Id := Original_Node (Right_Opnd (N)); Left_Rat : Rational; Result : Rational := No_Rational; Right_Rat : Rational; begin -- Both left and right operands are integer literals if Nkind (Left) = N_Integer_Literal and then Nkind (Right) = N_Integer_Literal then Left_Rat := Process_Literal (Left); Right_Rat := Process_Literal (Right); Result := Left_Rat / Right_Rat; end if; -- Provide minimal semantic information on dimension expressions, -- even though they have no run-time existence. This is for use by -- ASIS tools, in particular pretty-printing. If generating code -- standard operator resolution will take place. if ASIS_Mode then Set_Entity (N, Standard_Op_Divide); Set_Etype (N, Standard_Integer); end if; return Result; end Process_Divide; --------------------- -- Process_Literal -- --------------------- function Process_Literal (N : Node_Id) return Rational is begin return +Whole (UI_To_Int (Intval (N))); end Process_Literal; -- Start of processing for Create_Rational_From begin -- Check the expression is either a division of two integers or an -- integer itself. Note that the check applies to the original node -- since the node could have already been rewritten. -- Integer literal case if Nkind (Or_Node_Of_Expr) = N_Integer_Literal then Result := Process_Literal (Or_Node_Of_Expr); -- Divide operator case elsif Nkind (Or_Node_Of_Expr) = N_Op_Divide then Result := Process_Divide (Or_Node_Of_Expr); -- Minus operator case elsif Nkind (Or_Node_Of_Expr) = N_Op_Minus then Result := Process_Minus (Or_Node_Of_Expr); end if; -- When Expr cannot be interpreted as a rational and Complain is true, -- generate an error message. if Complain and then Result = No_Rational then Error_Msg_N ("rational expected", Expr); end if; return Result; end Create_Rational_From; ------------------- -- Dimensions_Of -- ------------------- function Dimensions_Of (N : Node_Id) return Dimension_Type is begin return Dimension_Table.Get (N); end Dimensions_Of; ----------------------- -- Dimensions_Msg_Of -- ----------------------- function Dimensions_Msg_Of (N : Node_Id; Description_Needed : Boolean := False) return String is Dims_Of_N : constant Dimension_Type := Dimensions_Of (N); Dimensions_Msg : Name_Id; System : System_Type; begin -- Initialization of Name_Buffer Name_Len := 0; -- N is not dimensionless if Exists (Dims_Of_N) then System := System_Of (Base_Type (Etype (N))); -- When Description_Needed, add to string "has dimension " before the -- actual dimension. if Description_Needed then Add_Str_To_Name_Buffer ("has dimension "); end if; Append (Global_Name_Buffer, From_Dim_To_Str_Of_Dim_Symbols (Dims_Of_N, System, True)); -- N is dimensionless -- When Description_Needed, return "is dimensionless" elsif Description_Needed then Add_Str_To_Name_Buffer ("is dimensionless"); -- Otherwise, return "'[']" else Add_Str_To_Name_Buffer ("'[']"); end if; Dimensions_Msg := Name_Find; return Get_Name_String (Dimensions_Msg); end Dimensions_Msg_Of; -------------------------- -- Dimension_Table_Hash -- -------------------------- function Dimension_Table_Hash (Key : Node_Id) return Dimension_Table_Range is begin return Dimension_Table_Range (Key mod 511); end Dimension_Table_Hash; ------------------------------------- -- Dim_Warning_For_Numeric_Literal -- ------------------------------------- procedure Dim_Warning_For_Numeric_Literal (N : Node_Id; Typ : Entity_Id) is begin -- Consider the literal zero (integer 0 or real 0.0) to be of any -- dimension. case Nkind (Original_Node (N)) is when N_Real_Literal => if Expr_Value_R (N) = Ureal_0 then return; end if; when N_Integer_Literal => if Expr_Value (N) = Uint_0 then return; end if; when others => null; end case; -- Initialize name buffer Name_Len := 0; Append (Global_Name_Buffer, String_From_Numeric_Literal (N)); -- Insert a blank between the literal and the symbol Add_Str_To_Name_Buffer (" "); Append (Global_Name_Buffer, Symbol_Of (Typ)); Error_Msg_Name_1 := Name_Find; Error_Msg_N ("assumed to be%%??", N); end Dim_Warning_For_Numeric_Literal; ---------------------- -- Dimensions_Match -- ---------------------- function Dimensions_Match (T1 : Entity_Id; T2 : Entity_Id) return Boolean is begin return not Has_Dimension_System (Base_Type (T1)) or else Dimensions_Of (T1) = Dimensions_Of (T2); end Dimensions_Match; --------------------------- -- Dimension_System_Root -- --------------------------- function Dimension_System_Root (T : Entity_Id) return Entity_Id is Root : Entity_Id; begin Root := Base_Type (T); if Has_Dimension_System (Root) then return First_Subtype (Root); -- for example Dim_Mks else return Empty; end if; end Dimension_System_Root; ---------------------------------------- -- Eval_Op_Expon_For_Dimensioned_Type -- ---------------------------------------- -- Evaluate the expon operator for real dimensioned type. -- Note that if the exponent is an integer (denominator = 1) the node is -- evaluated by the regular Eval_Op_Expon routine (see Sem_Eval). procedure Eval_Op_Expon_For_Dimensioned_Type (N : Node_Id; Btyp : Entity_Id) is R : constant Node_Id := Right_Opnd (N); R_Value : Rational := No_Rational; begin if Is_Real_Type (Btyp) then R_Value := Create_Rational_From (R, False); end if; -- Check that the exponent is not an integer if R_Value /= No_Rational and then R_Value.Denominator /= 1 then Eval_Op_Expon_With_Rational_Exponent (N, R_Value); else Eval_Op_Expon (N); end if; end Eval_Op_Expon_For_Dimensioned_Type; ------------------------------------------ -- Eval_Op_Expon_With_Rational_Exponent -- ------------------------------------------ -- For dimensioned operand in exponentiation, exponent is allowed to be a -- Rational and not only an Integer like for dimensionless operands. For -- that particular case, the left operand is rewritten as a function call -- using the function Expon_LLF from s-llflex.ads. procedure Eval_Op_Expon_With_Rational_Exponent (N : Node_Id; Exponent_Value : Rational) is Loc : constant Source_Ptr := Sloc (N); Dims_Of_N : constant Dimension_Type := Dimensions_Of (N); L : constant Node_Id := Left_Opnd (N); Etyp_Of_L : constant Entity_Id := Etype (L); Btyp_Of_L : constant Entity_Id := Base_Type (Etyp_Of_L); Actual_1 : Node_Id; Actual_2 : Node_Id; Dim_Power : Rational; List_Of_Dims : List_Id; New_Aspect : Node_Id; New_Aspects : List_Id; New_Id : Entity_Id; New_N : Node_Id; New_Subtyp_Decl_For_L : Node_Id; System : System_Type; begin -- Case when the operand is not dimensionless if Exists (Dims_Of_N) then -- Get the corresponding System_Type to know the exact number of -- dimensions in the system. System := System_Of (Btyp_Of_L); -- Generation of a new subtype with the proper dimensions -- In order to rewrite the operator as a type conversion, a new -- dimensioned subtype with the resulting dimensions of the -- exponentiation must be created. -- Generate: -- Btyp_Of_L : constant Entity_Id := Base_Type (Etyp_Of_L); -- System : constant System_Id := -- Get_Dimension_System_Id (Btyp_Of_L); -- Num_Of_Dims : constant Number_Of_Dimensions := -- Dimension_Systems.Table (System).Dimension_Count; -- subtype T is Btyp_Of_L -- with -- Dimension => ( -- Dims_Of_N (1).Numerator / Dims_Of_N (1).Denominator, -- Dims_Of_N (2).Numerator / Dims_Of_N (2).Denominator, -- ... -- Dims_Of_N (Num_Of_Dims).Numerator / -- Dims_Of_N (Num_Of_Dims).Denominator); -- Step 1: Generate the new aggregate for the aspect Dimension New_Aspects := Empty_List; List_Of_Dims := New_List; for Position in Dims_Of_N'First .. System.Count loop Dim_Power := Dims_Of_N (Position); Append_To (List_Of_Dims, Make_Op_Divide (Loc, Left_Opnd => Make_Integer_Literal (Loc, Int (Dim_Power.Numerator)), Right_Opnd => Make_Integer_Literal (Loc, Int (Dim_Power.Denominator)))); end loop; -- Step 2: Create the new Aspect Specification for Aspect Dimension New_Aspect := Make_Aspect_Specification (Loc, Identifier => Make_Identifier (Loc, Name_Dimension), Expression => Make_Aggregate (Loc, Expressions => List_Of_Dims)); -- Step 3: Make a temporary identifier for the new subtype New_Id := Make_Temporary (Loc, 'T'); Set_Is_Internal (New_Id); -- Step 4: Declaration of the new subtype New_Subtyp_Decl_For_L := Make_Subtype_Declaration (Loc, Defining_Identifier => New_Id, Subtype_Indication => New_Occurrence_Of (Btyp_Of_L, Loc)); Append (New_Aspect, New_Aspects); Set_Parent (New_Aspects, New_Subtyp_Decl_For_L); Set_Aspect_Specifications (New_Subtyp_Decl_For_L, New_Aspects); Analyze (New_Subtyp_Decl_For_L); -- Case where the operand is dimensionless else New_Id := Btyp_Of_L; end if; -- Replacement of N by New_N -- Generate: -- Actual_1 := Long_Long_Float (L), -- Actual_2 := Long_Long_Float (Exponent_Value.Numerator) / -- Long_Long_Float (Exponent_Value.Denominator); -- (T (Expon_LLF (Actual_1, Actual_2))); -- where T is the subtype declared in step 1 -- The node is rewritten as a type conversion -- Step 1: Creation of the two parameters of Expon_LLF function call Actual_1 := Make_Type_Conversion (Loc, Subtype_Mark => New_Occurrence_Of (Standard_Long_Long_Float, Loc), Expression => Relocate_Node (L)); Actual_2 := Make_Op_Divide (Loc, Left_Opnd => Make_Real_Literal (Loc, UR_From_Uint (UI_From_Int (Int (Exponent_Value.Numerator)))), Right_Opnd => Make_Real_Literal (Loc, UR_From_Uint (UI_From_Int (Int (Exponent_Value.Denominator))))); -- Step 2: Creation of New_N New_N := Make_Type_Conversion (Loc, Subtype_Mark => New_Occurrence_Of (New_Id, Loc), Expression => Make_Function_Call (Loc, Name => New_Occurrence_Of (RTE (RE_Expon_LLF), Loc), Parameter_Associations => New_List ( Actual_1, Actual_2))); -- Step 3: Rewrite N with the result Rewrite (N, New_N); Set_Etype (N, New_Id); Analyze_And_Resolve (N, New_Id); end Eval_Op_Expon_With_Rational_Exponent; ------------ -- Exists -- ------------ function Exists (Dim : Dimension_Type) return Boolean is begin return Dim /= Null_Dimension; end Exists; function Exists (Str : String_Id) return Boolean is begin return Str /= No_String; end Exists; function Exists (Sys : System_Type) return Boolean is begin return Sys /= Null_System; end Exists; --------------------------------- -- Expand_Put_Call_With_Symbol -- --------------------------------- -- For procedure Put (resp. Put_Dim_Of) and function Image, defined in -- System.Dim.Float_IO or System.Dim.Integer_IO, the default string -- parameter is rewritten to include the unit symbol (or the dimension -- symbols if not a defined quantity) in the output of a dimensioned -- object. If a value is already supplied by the user for the parameter -- Symbol, it is used as is. -- Case 1. Item is dimensionless -- * Put : Item appears without a suffix -- * Put_Dim_Of : the output is [] -- Obj : Mks_Type := 2.6; -- Put (Obj, 1, 1, 0); -- Put_Dim_Of (Obj); -- The corresponding outputs are: -- $2.6 -- $[] -- Case 2. Item has a dimension -- * Put : If the type of Item is a dimensioned subtype whose -- symbol is not empty, then the symbol appears as a -- suffix. Otherwise, a new string is created and appears -- as a suffix of Item. This string results in the -- successive concatanations between each unit symbol -- raised by its corresponding dimension power from the -- dimensions of Item. -- * Put_Dim_Of : The output is a new string resulting in the successive -- concatanations between each dimension symbol raised by -- its corresponding dimension power from the dimensions of -- Item. -- subtype Random is Mks_Type -- with -- Dimension => ( -- Meter => 3, -- Candela => -1, -- others => 0); -- Obj : Random := 5.0; -- Put (Obj); -- Put_Dim_Of (Obj); -- The corresponding outputs are: -- $5.0 m**3.cd**(-1) -- $[l**3.J**(-1)] -- The function Image returns the string identical to that produced by -- a call to Put whose first parameter is a string. procedure Expand_Put_Call_With_Symbol (N : Node_Id) is Actuals : constant List_Id := Parameter_Associations (N); Loc : constant Source_Ptr := Sloc (N); Name_Call : constant Node_Id := Name (N); New_Actuals : constant List_Id := New_List; Actual : Node_Id; Dims_Of_Actual : Dimension_Type; Etyp : Entity_Id; New_Str_Lit : Node_Id := Empty; Symbols : String_Id; Is_Put_Dim_Of : Boolean := False; -- This flag is used in order to differentiate routines Put and -- Put_Dim_Of. Set to True if the procedure is one of the Put_Dim_Of -- defined in System.Dim.Float_IO or System.Dim.Integer_IO. function Has_Symbols return Boolean; -- Return True if the current Put call already has a parameter -- association for parameter "Symbols" with the correct string of -- symbols. function Is_Procedure_Put_Call return Boolean; -- Return True if the current call is a call of an instantiation of a -- procedure Put defined in the package System.Dim.Float_IO and -- System.Dim.Integer_IO. function Item_Actual return Node_Id; -- Return the item actual parameter node in the output call ----------------- -- Has_Symbols -- ----------------- function Has_Symbols return Boolean is Actual : Node_Id; Actual_Str : Node_Id; begin -- Look for a symbols parameter association in the list of actuals Actual := First (Actuals); while Present (Actual) loop -- Positional parameter association case when the actual is a -- string literal. if Nkind (Actual) = N_String_Literal then Actual_Str := Actual; -- Named parameter association case when selector name is Symbol elsif Nkind (Actual) = N_Parameter_Association and then Chars (Selector_Name (Actual)) = Name_Symbol then Actual_Str := Explicit_Actual_Parameter (Actual); -- Ignore all other cases else Actual_Str := Empty; end if; if Present (Actual_Str) then -- Return True if the actual comes from source or if the string -- of symbols doesn't have the default value (i.e. it is ""), -- in which case it is used as suffix of the generated string. if Comes_From_Source (Actual) or else String_Length (Strval (Actual_Str)) /= 0 then return True; else return False; end if; end if; Next (Actual); end loop; -- At this point, the call has no parameter association. Look to the -- last actual since the symbols parameter is the last one. return Nkind (Last (Actuals)) = N_String_Literal; end Has_Symbols; --------------------------- -- Is_Procedure_Put_Call -- --------------------------- function Is_Procedure_Put_Call return Boolean is Ent : Entity_Id; Loc : Source_Ptr; begin -- There are three different Put (resp. Put_Dim_Of) routines in each -- generic dim IO package. Verify the current procedure call is one -- of them. if Is_Entity_Name (Name_Call) then Ent := Entity (Name_Call); -- Get the original subprogram entity following the renaming chain if Present (Alias (Ent)) then Ent := Alias (Ent); end if; Loc := Sloc (Ent); -- Check the name of the entity subprogram is Put (resp. -- Put_Dim_Of) and verify this entity is located in either -- System.Dim.Float_IO or System.Dim.Integer_IO. if Loc > No_Location and then Is_Dim_IO_Package_Entity (Cunit_Entity (Get_Source_Unit (Loc))) then if Chars (Ent) = Name_Put_Dim_Of then Is_Put_Dim_Of := True; return True; elsif Chars (Ent) = Name_Put or else Chars (Ent) = Name_Image then return True; end if; end if; end if; return False; end Is_Procedure_Put_Call; ----------------- -- Item_Actual -- ----------------- function Item_Actual return Node_Id is Actual : Node_Id; begin -- Look for the item actual as a parameter association Actual := First (Actuals); while Present (Actual) loop if Nkind (Actual) = N_Parameter_Association and then Chars (Selector_Name (Actual)) = Name_Item then return Explicit_Actual_Parameter (Actual); end if; Next (Actual); end loop; -- Case where the item has been defined without an association Actual := First (Actuals); -- Depending on the procedure Put, Item actual could be first or -- second in the list of actuals. if Has_Dimension_System (Base_Type (Etype (Actual))) then return Actual; else return Next (Actual); end if; end Item_Actual; -- Start of processing for Expand_Put_Call_With_Symbol begin if Is_Procedure_Put_Call and then not Has_Symbols then Actual := Item_Actual; Dims_Of_Actual := Dimensions_Of (Actual); Etyp := Etype (Actual); -- Put_Dim_Of case if Is_Put_Dim_Of then -- Check that the item is not dimensionless -- Create the new String_Literal with the new String_Id generated -- by the routine From_Dim_To_Str_Of_Dim_Symbols. if Exists (Dims_Of_Actual) then New_Str_Lit := Make_String_Literal (Loc, From_Dim_To_Str_Of_Dim_Symbols (Dims_Of_Actual, System_Of (Base_Type (Etyp)))); -- If dimensionless, the output is [] else New_Str_Lit := Make_String_Literal (Loc, "[]"); end if; -- Put case else -- Add the symbol as a suffix of the value if the subtype has a -- unit symbol or if the parameter is not dimensionless. if Exists (Symbol_Of (Etyp)) then Symbols := Symbol_Of (Etyp); else Symbols := From_Dim_To_Str_Of_Unit_Symbols (Dims_Of_Actual, System_Of (Base_Type (Etyp))); end if; -- Check Symbols exists if Exists (Symbols) then Start_String; -- Put a space between the value and the dimension Store_String_Char (' '); Store_String_Chars (Symbols); New_Str_Lit := Make_String_Literal (Loc, End_String); end if; end if; if Present (New_Str_Lit) then -- Insert all actuals in New_Actuals Actual := First (Actuals); while Present (Actual) loop -- Copy every actuals in New_Actuals except the Symbols -- parameter association. if Nkind (Actual) = N_Parameter_Association and then Chars (Selector_Name (Actual)) /= Name_Symbol then Append_To (New_Actuals, Make_Parameter_Association (Loc, Selector_Name => New_Copy (Selector_Name (Actual)), Explicit_Actual_Parameter => New_Copy (Explicit_Actual_Parameter (Actual)))); elsif Nkind (Actual) /= N_Parameter_Association then Append_To (New_Actuals, New_Copy (Actual)); end if; Next (Actual); end loop; -- Create new Symbols param association and append to New_Actuals Append_To (New_Actuals, Make_Parameter_Association (Loc, Selector_Name => Make_Identifier (Loc, Name_Symbol), Explicit_Actual_Parameter => New_Str_Lit)); -- Rewrite and analyze the procedure call if Chars (Name_Call) = Name_Image then Rewrite (N, Make_Function_Call (Loc, Name => New_Copy (Name_Call), Parameter_Associations => New_Actuals)); Analyze_And_Resolve (N); else Rewrite (N, Make_Procedure_Call_Statement (Loc, Name => New_Copy (Name_Call), Parameter_Associations => New_Actuals)); Analyze (N); end if; end if; end if; end Expand_Put_Call_With_Symbol; ------------------------------------ -- From_Dim_To_Str_Of_Dim_Symbols -- ------------------------------------ -- Given a dimension vector and the corresponding dimension system, create -- a String_Id to output dimension symbols corresponding to the dimensions -- Dims. If In_Error_Msg is True, there is a special handling for character -- asterisk * which is an insertion character in error messages. function From_Dim_To_Str_Of_Dim_Symbols (Dims : Dimension_Type; System : System_Type; In_Error_Msg : Boolean := False) return String_Id is Dim_Power : Rational; First_Dim : Boolean := True; procedure Store_String_Oexpon; -- Store the expon operator symbol "**" in the string. In error -- messages, asterisk * is a special character and must be quoted -- to be placed literally into the message. ------------------------- -- Store_String_Oexpon -- ------------------------- procedure Store_String_Oexpon is begin if In_Error_Msg then Store_String_Chars ("'*'*"); else Store_String_Chars ("**"); end if; end Store_String_Oexpon; -- Start of processing for From_Dim_To_Str_Of_Dim_Symbols begin -- Initialization of the new String_Id Start_String; -- Store the dimension symbols inside boxes if In_Error_Msg then Store_String_Chars ("'["); else Store_String_Char ('['); end if; for Position in Dimension_Type'Range loop Dim_Power := Dims (Position); if Dim_Power /= Zero then if First_Dim then First_Dim := False; else Store_String_Char ('.'); end if; Store_String_Chars (System.Dim_Symbols (Position)); -- Positive dimension case if Dim_Power.Numerator > 0 then -- Integer case if Dim_Power.Denominator = 1 then if Dim_Power.Numerator /= 1 then Store_String_Oexpon; Store_String_Int (Int (Dim_Power.Numerator)); end if; -- Rational case when denominator /= 1 else Store_String_Oexpon; Store_String_Char ('('); Store_String_Int (Int (Dim_Power.Numerator)); Store_String_Char ('/'); Store_String_Int (Int (Dim_Power.Denominator)); Store_String_Char (')'); end if; -- Negative dimension case else Store_String_Oexpon; Store_String_Char ('('); Store_String_Char ('-'); Store_String_Int (Int (-Dim_Power.Numerator)); -- Integer case if Dim_Power.Denominator = 1 then Store_String_Char (')'); -- Rational case when denominator /= 1 else Store_String_Char ('/'); Store_String_Int (Int (Dim_Power.Denominator)); Store_String_Char (')'); end if; end if; end if; end loop; if In_Error_Msg then Store_String_Chars ("']"); else Store_String_Char (']'); end if; return End_String; end From_Dim_To_Str_Of_Dim_Symbols; ------------------------------------- -- From_Dim_To_Str_Of_Unit_Symbols -- ------------------------------------- -- Given a dimension vector and the corresponding dimension system, -- create a String_Id to output the unit symbols corresponding to the -- dimensions Dims. function From_Dim_To_Str_Of_Unit_Symbols (Dims : Dimension_Type; System : System_Type) return String_Id is Dim_Power : Rational; First_Dim : Boolean := True; begin -- Return No_String if dimensionless if not Exists (Dims) then return No_String; end if; -- Initialization of the new String_Id Start_String; for Position in Dimension_Type'Range loop Dim_Power := Dims (Position); if Dim_Power /= Zero then if First_Dim then First_Dim := False; else Store_String_Char ('.'); end if; Store_String_Chars (System.Unit_Symbols (Position)); -- Positive dimension case if Dim_Power.Numerator > 0 then -- Integer case if Dim_Power.Denominator = 1 then if Dim_Power.Numerator /= 1 then Store_String_Chars ("**"); Store_String_Int (Int (Dim_Power.Numerator)); end if; -- Rational case when denominator /= 1 else Store_String_Chars ("**"); Store_String_Char ('('); Store_String_Int (Int (Dim_Power.Numerator)); Store_String_Char ('/'); Store_String_Int (Int (Dim_Power.Denominator)); Store_String_Char (')'); end if; -- Negative dimension case else Store_String_Chars ("**"); Store_String_Char ('('); Store_String_Char ('-'); Store_String_Int (Int (-Dim_Power.Numerator)); -- Integer case if Dim_Power.Denominator = 1 then Store_String_Char (')'); -- Rational case when denominator /= 1 else Store_String_Char ('/'); Store_String_Int (Int (Dim_Power.Denominator)); Store_String_Char (')'); end if; end if; end if; end loop; return End_String; end From_Dim_To_Str_Of_Unit_Symbols; --------- -- GCD -- --------- function GCD (Left, Right : Whole) return Int is L : Whole; R : Whole; begin L := Left; R := Right; while R /= 0 loop L := L mod R; if L = 0 then return Int (R); end if; R := R mod L; end loop; return Int (L); end GCD; -------------------------- -- Has_Dimension_System -- -------------------------- function Has_Dimension_System (Typ : Entity_Id) return Boolean is begin return Exists (System_Of (Typ)); end Has_Dimension_System; ------------------------------ -- Is_Dim_IO_Package_Entity -- ------------------------------ function Is_Dim_IO_Package_Entity (E : Entity_Id) return Boolean is begin -- Check the package entity corresponds to System.Dim.Float_IO or -- System.Dim.Integer_IO. return Is_RTU (E, System_Dim_Float_IO) or else Is_RTU (E, System_Dim_Integer_IO); end Is_Dim_IO_Package_Entity; ------------------------------------- -- Is_Dim_IO_Package_Instantiation -- ------------------------------------- function Is_Dim_IO_Package_Instantiation (N : Node_Id) return Boolean is Gen_Id : constant Node_Id := Name (N); begin -- Check that the instantiated package is either System.Dim.Float_IO -- or System.Dim.Integer_IO. return Is_Entity_Name (Gen_Id) and then Is_Dim_IO_Package_Entity (Entity (Gen_Id)); end Is_Dim_IO_Package_Instantiation; ---------------- -- Is_Invalid -- ---------------- function Is_Invalid (Position : Dimension_Position) return Boolean is begin return Position = Invalid_Position; end Is_Invalid; --------------------- -- Move_Dimensions -- --------------------- procedure Move_Dimensions (From, To : Node_Id) is begin if Ada_Version < Ada_2012 then return; end if; -- Copy the dimension of 'From to 'To' and remove dimension of 'From' Copy_Dimensions (From, To); Remove_Dimensions (From); end Move_Dimensions; --------------------------------------- -- New_Copy_Tree_And_Copy_Dimensions -- --------------------------------------- function New_Copy_Tree_And_Copy_Dimensions (Source : Node_Id; Map : Elist_Id := No_Elist; New_Sloc : Source_Ptr := No_Location; New_Scope : Entity_Id := Empty) return Node_Id is New_Copy : constant Node_Id := New_Copy_Tree (Source, Map, New_Sloc, New_Scope); begin -- Move the dimensions of Source to New_Copy Copy_Dimensions (Source, New_Copy); return New_Copy; end New_Copy_Tree_And_Copy_Dimensions; ------------ -- Reduce -- ------------ function Reduce (X : Rational) return Rational is begin if X.Numerator = 0 then return Zero; end if; declare G : constant Int := GCD (X.Numerator, X.Denominator); begin return Rational'(Numerator => Whole (Int (X.Numerator) / G), Denominator => Whole (Int (X.Denominator) / G)); end; end Reduce; ----------------------- -- Remove_Dimensions -- ----------------------- procedure Remove_Dimensions (N : Node_Id) is Dims_Of_N : constant Dimension_Type := Dimensions_Of (N); begin if Exists (Dims_Of_N) then Dimension_Table.Remove (N); end if; end Remove_Dimensions; ----------------------------------- -- Remove_Dimension_In_Statement -- ----------------------------------- -- Removal of dimension in statement as part of the Analyze_Statements -- routine (see package Sem_Ch5). procedure Remove_Dimension_In_Statement (Stmt : Node_Id) is begin if Ada_Version < Ada_2012 then return; end if; -- Remove dimension in parameter specifications for accept statement if Nkind (Stmt) = N_Accept_Statement then declare Param : Node_Id := First (Parameter_Specifications (Stmt)); begin while Present (Param) loop Remove_Dimensions (Param); Next (Param); end loop; end; -- Remove dimension of name and expression in assignments elsif Nkind (Stmt) = N_Assignment_Statement then Remove_Dimensions (Expression (Stmt)); Remove_Dimensions (Name (Stmt)); end if; end Remove_Dimension_In_Statement; -------------------- -- Set_Dimensions -- -------------------- procedure Set_Dimensions (N : Node_Id; Val : Dimension_Type) is begin pragma Assert (OK_For_Dimension (Nkind (N))); pragma Assert (Exists (Val)); Dimension_Table.Set (N, Val); end Set_Dimensions; ---------------- -- Set_Symbol -- ---------------- procedure Set_Symbol (E : Entity_Id; Val : String_Id) is begin Symbol_Table.Set (E, Val); end Set_Symbol; --------------------------------- -- String_From_Numeric_Literal -- --------------------------------- function String_From_Numeric_Literal (N : Node_Id) return String_Id is Loc : constant Source_Ptr := Sloc (N); Sbuffer : constant Source_Buffer_Ptr := Source_Text (Get_Source_File_Index (Loc)); Src_Ptr : Source_Ptr := Loc; C : Character := Sbuffer (Src_Ptr); -- Current source program character function Belong_To_Numeric_Literal (C : Character) return Boolean; -- Return True if C belongs to a numeric literal ------------------------------- -- Belong_To_Numeric_Literal -- ------------------------------- function Belong_To_Numeric_Literal (C : Character) return Boolean is begin case C is when '0' .. '9' | '_' | '.' | 'e' | '#' | 'A' | 'B' | 'C' | 'D' | 'E' | 'F' => return True; -- Make sure '+' or '-' is part of an exponent. when '+' | '-' => declare Prev_C : constant Character := Sbuffer (Src_Ptr - 1); begin return Prev_C = 'e' or else Prev_C = 'E'; end; -- All other character doesn't belong to a numeric literal when others => return False; end case; end Belong_To_Numeric_Literal; -- Start of processing for String_From_Numeric_Literal begin Start_String; while Belong_To_Numeric_Literal (C) loop Store_String_Char (C); Src_Ptr := Src_Ptr + 1; C := Sbuffer (Src_Ptr); end loop; return End_String; end String_From_Numeric_Literal; --------------- -- Symbol_Of -- --------------- function Symbol_Of (E : Entity_Id) return String_Id is Subtype_Symbol : constant String_Id := Symbol_Table.Get (E); begin if Subtype_Symbol /= No_String then return Subtype_Symbol; else return From_Dim_To_Str_Of_Unit_Symbols (Dimensions_Of (E), System_Of (Base_Type (E))); end if; end Symbol_Of; ----------------------- -- Symbol_Table_Hash -- ----------------------- function Symbol_Table_Hash (Key : Entity_Id) return Symbol_Table_Range is begin return Symbol_Table_Range (Key mod 511); end Symbol_Table_Hash; --------------- -- System_Of -- --------------- function System_Of (E : Entity_Id) return System_Type is Type_Decl : constant Node_Id := Parent (E); begin -- Look for Type_Decl in System_Table for Dim_Sys in 1 .. System_Table.Last loop if Type_Decl = System_Table.Table (Dim_Sys).Type_Decl then return System_Table.Table (Dim_Sys); end if; end loop; return Null_System; end System_Of; end Sem_Dim;