# Makefile.in generated by automake 1.15.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2017 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ @SANITIZER_SUPPORTED_TRUE@am__append_1 = include/sanitizer/common_interface_defs.h \ @SANITIZER_SUPPORTED_TRUE@ include/sanitizer/lsan_interface.h \ @SANITIZER_SUPPORTED_TRUE@ include/sanitizer/asan_interface.h \ @SANITIZER_SUPPORTED_TRUE@ include/sanitizer/tsan_interface.h @SANITIZER_SUPPORTED_TRUE@@USING_MAC_INTERPOSE_FALSE@am__append_2 = interception @LIBBACKTRACE_SUPPORTED_TRUE@@SANITIZER_SUPPORTED_TRUE@am__append_3 = libbacktrace @SANITIZER_SUPPORTED_TRUE@@TSAN_SUPPORTED_TRUE@am__append_4 = tsan subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \ $(top_srcdir)/../config/depstand.m4 \ $(top_srcdir)/../config/lead-dot.m4 \ $(top_srcdir)/../config/libstdc++-raw-cxx.m4 \ $(top_srcdir)/../config/multi.m4 \ $(top_srcdir)/../config/override.m4 \ $(top_srcdir)/../config/stdint.m4 \ $(top_srcdir)/../config/toolexeclibdir.m4 \ $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \ $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \ $(top_srcdir)/acinclude.m4 $(top_srcdir)/../libtool.m4 \ $(top_srcdir)/../config/enable.m4 \ $(top_srcdir)/../config/cet.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ $(am__configure_deps) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = libsanitizer.spec CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(sanincludedir)" \ "$(DESTDIR)$(toolexeclibdir)" HEADERS = $(nodist_saninclude_HEADERS) $(nodist_toolexeclib_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope DIST_SUBDIRS = sanitizer_common interception libbacktrace lsan asan \ ubsan tsan ACLOCAL = @ACLOCAL@ ALLOC_FILE = @ALLOC_FILE@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BACKTRACE_SUPPORTED = @BACKTRACE_SUPPORTED@ BACKTRACE_SUPPORTS_THREADS = @BACKTRACE_SUPPORTS_THREADS@ BACKTRACE_USES_MALLOC = @BACKTRACE_USES_MALLOC@ CC = @CC@ CCAS = @CCAS@ CCASDEPMODE = @CCASDEPMODE@ CCASFLAGS = @CCASFLAGS@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ EXTRA_ASFLAGS = @EXTRA_ASFLAGS@ EXTRA_CFLAGS = @EXTRA_CFLAGS@ EXTRA_CXXFLAGS = @EXTRA_CXXFLAGS@ FGREP = @FGREP@ FORMAT_FILE = @FORMAT_FILE@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBSTDCXX_RAW_CXX_CXXFLAGS = @LIBSTDCXX_RAW_CXX_CXXFLAGS@ LIBSTDCXX_RAW_CXX_LDFLAGS = @LIBSTDCXX_RAW_CXX_LDFLAGS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ RPC_DEFS = @RPC_DEFS@ SANITIZER_COMMON_TARGET_DEPENDENT_OBJECTS = @SANITIZER_COMMON_TARGET_DEPENDENT_OBJECTS@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ TSAN_TARGET_DEPENDENT_OBJECTS = @TSAN_TARGET_DEPENDENT_OBJECTS@ VERSION = @VERSION@ VIEW_FILE = @VIEW_FILE@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ enable_shared = @enable_shared@ enable_static = @enable_static@ exec_prefix = @exec_prefix@ get_gcc_base_ver = @get_gcc_base_ver@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ link_libasan = @link_libasan@ link_liblsan = @link_liblsan@ link_libtsan = @link_libtsan@ link_libubsan = @link_libubsan@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ multi_basedir = @multi_basedir@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_noncanonical = @target_noncanonical@ target_os = @target_os@ target_vendor = @target_vendor@ toolexecdir = @toolexecdir@ toolexeclibdir = @toolexeclibdir@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ ACLOCAL_AMFLAGS = -I .. -I ../config sanincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/include/sanitizer nodist_saninclude_HEADERS = $(am__append_1) @SANITIZER_SUPPORTED_TRUE@SUBDIRS = sanitizer_common $(am__append_2) \ @SANITIZER_SUPPORTED_TRUE@ $(am__append_3) lsan asan ubsan \ @SANITIZER_SUPPORTED_TRUE@ $(am__append_4) gcc_version := $(shell @get_gcc_base_ver@ $(top_srcdir)/../gcc/BASE-VER) # Work around what appears to be a GNU make bug handling MAKEFLAGS # values defined in terms of make variables, as is the case for CC and # friends when we are called from the top level Makefile. AM_MAKEFLAGS = \ "AR_FLAGS=$(AR_FLAGS)" \ "CC_FOR_BUILD=$(CC_FOR_BUILD)" \ "CFLAGS=$(CFLAGS)" \ "CXXFLAGS=$(CXXFLAGS)" \ "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \ "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \ "INSTALL=$(INSTALL)" \ "INSTALL_DATA=$(INSTALL_DATA)" \ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \ "JC1FLAGS=$(JC1FLAGS)" \ "LDFLAGS=$(LDFLAGS)" \ "LIBCFLAGS=$(LIBCFLAGS)" \ "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \ "MAKE=$(MAKE)" \ "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \ "PICFLAG=$(PICFLAG)" \ "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \ "SHELL=$(SHELL)" \ "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ "exec_prefix=$(exec_prefix)" \ "infodir=$(infodir)" \ "libdir=$(libdir)" \ "prefix=$(prefix)" \ "includedir=$(includedir)" \ "AR=$(AR)" \ "AS=$(AS)" \ "LD=$(LD)" \ "LIBCFLAGS=$(LIBCFLAGS)" \ "NM=$(NM)" \ "PICFLAG=$(PICFLAG)" \ "RANLIB=$(RANLIB)" \ "DESTDIR=$(DESTDIR)" MAKEOVERRIDES = nodist_toolexeclib_HEADERS = libsanitizer.spec MULTISRCTOP = MULTIBUILDTOP = MULTIDIRS = MULTISUBDIR = MULTIDO = true MULTICLEAN = true all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/../multilib.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_srcdir)/../multilib.am $(am__empty): $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @test -f $@ || rm -f stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 libsanitizer.spec: $(top_builddir)/config.status $(srcdir)/libsanitizer.spec.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt install-nodist_sanincludeHEADERS: $(nodist_saninclude_HEADERS) @$(NORMAL_INSTALL) @list='$(nodist_saninclude_HEADERS)'; test -n "$(sanincludedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(sanincludedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(sanincludedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sanincludedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(sanincludedir)" || exit $$?; \ done uninstall-nodist_sanincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(nodist_saninclude_HEADERS)'; test -n "$(sanincludedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(sanincludedir)'; $(am__uninstall_files_from_dir) install-nodist_toolexeclibHEADERS: $(nodist_toolexeclib_HEADERS) @$(NORMAL_INSTALL) @list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(toolexeclibdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(toolexeclibdir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(toolexeclibdir)" || exit $$?; \ done uninstall-nodist_toolexeclibHEADERS: @$(NORMAL_UNINSTALL) @list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(toolexeclibdir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files check-am: all-am check: check-recursive all-am: Makefile $(HEADERS) config.h all-local installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(sanincludedir)" "$(DESTDIR)$(toolexeclibdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-local distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-nodist_sanincludeHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-exec-local install-nodist_toolexeclibHEADERS install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic \ maintainer-clean-local mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool \ mostlyclean-local pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-nodist_sanincludeHEADERS \ uninstall-nodist_toolexeclibHEADERS .MAKE: $(am__recursive_targets) all install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \ am--refresh check check-am clean clean-cscope clean-generic \ clean-libtool clean-local cscope cscopelist-am ctags ctags-am \ distclean distclean-generic distclean-hdr distclean-libtool \ distclean-local distclean-tags dvi dvi-am html html-am info \ info-am install install-am install-data install-data-am \ install-dvi install-dvi-am install-exec install-exec-am \ install-exec-local install-html install-html-am install-info \ install-info-am install-man install-nodist_sanincludeHEADERS \ install-nodist_toolexeclibHEADERS install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-local mostlyclean \ mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \ pdf-am ps ps-am tags tags-am uninstall uninstall-am \ uninstall-nodist_sanincludeHEADERS \ uninstall-nodist_toolexeclibHEADERS .PRECIOUS: Makefile # GNU Make needs to see an explicit $(MAKE) variable in the command it # runs to enable its job server during parallel builds. Hence the # comments below. all-multi: $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE) install-multi: $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE) mostlyclean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE) clean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE) distclean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE) maintainer-clean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE) .MAKE .PHONY: all-multi clean-multi distclean-multi install-am \ install-multi maintainer-clean-multi mostlyclean-multi install-exec-local: install-multi all-local: all-multi mostlyclean-local: mostlyclean-multi clean-local: clean-multi distclean-local: distclean-multi maintainer-clean-local: maintainer-clean-multi # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: