/* 6809 Simulator V09.

   Copyright 1994, L.C. Benschop, Eidnhoven The Netherlands.
   This version of the program is distributed under the terms and conditions
   of the GNU General Public License version 2. See the file COPYING.
   THERE IS NO WARRANTY ON THIS PROGRAM!!!
   
   This program simulates a 6809 processor.
   
   System dependencies: short must be 16 bits.
                        char  must be 8 bits.
                        long must be more than 16 bits.
                        arrays up to 65536 bytes must be supported.
                        machine must be twos complement.
   Most Unix machines will work. For MSODS you need long pointers
   and you may have to malloc() the mem array of 65536 bytes.
                 
   Define BIG_ENDIAN if you have a big-endian machine (680x0 etc)              
   
   Special instructions:                     
   SWI2 writes char to stdout from register B.
   SWI3 reads char from stdout to register B, sets carry at EOF.
               (or when no key available when using term control).
   SWI retains its normal function. 
   CWAI and SYNC stop simulator.
   
*/


#include <stdio.h>
#include <stdlib.h>
#include <strings.h>
#include <sys/stat.h>
#include <string.h>

#define engine extern

#include "v09.h"

FILE *tracefile;

extern FILE *disk[];
extern FILE *fp;      // for disasm
extern char *prog;    // for disasm
extern void disasm(int,int);
extern void do_mmu(Word,Byte);
extern void init_term(void) ;
#ifdef USE_VDISK
extern int setVdisk(int drv,char *name) ;
#endif



void do_trace(FILE *tracefile)
{
 Word pc=pcreg;
 Byte ir;
 // fprintf(tracefile,"pc=%04x ",pc);
 // ir=mem[pc++];
 // fprintf(tracefile,"i=%02x ",ir); if((ir&0xfe)==0x10) fprintf(tracefile,"%02x ",mem[pc]);else 
 // fprintf(tracefile,"   ");
 fprintf(tracefile,"x=%04x y=%04x u=%04x s=%04x a=%02x b=%02x cc=%02x dp=%02x pc=",
                   xreg,yreg,ureg,sreg,*areg,*breg,ccreg,dpreg);
 fp = tracefile;
 disasm(pc,pc);
} 

char *romfile = "v09.rom";
long romstart = 0x8000;

long
filesize(FILE *image)
{
    struct stat buf;
    fstat(fileno(image),&buf);
    return buf.st_size;
}


void 
read_image()
{
 FILE *image;
 if((image=fopen(romfile,"rb"))==NULL) 
  if((image=fopen("../v09.rom","rb"))==NULL) 
   if((image=fopen("..\\v09.rom","rb"))==NULL) {
    perror("v09, image file");
    exit(2);
 }
 long len = filesize(image);
 /*
  * 
  *    0x0000-0xdfff    normal mem
  *    0xxxxx-0xdfff    rom
  *    0xe000-0xe100    i/o
  *    0xe000-0xffff    rom
  *
  * discless boot
  *    rom image will be copyied from 0xed00-0x1xxxx
  *    boot copies 0x10000-0x1xxxx to os9's boot memory 
  */
#ifdef USE_MMU
 /*
  * In case of Coco, there is no ROM (switched out after boot )
  *    0x00000-0x0fdff    normal mem
  *    0x0fe00-0x0ffff    ram fixed address ram including io
  *    0x10000-0x1fffff    ram (2MB memory )
  *  >0x200000            lapround
  *
  * discless boot
  *    rom image will be copyied from 0x7eed00-0x7fxxxx (all ram)
  *    boot copies 0x800000-0x8xxxx to os9's boot memory  (ususally done by rel.asm )
  *        (original system copies it from fd or hd)
  *    after that 0x800000-0x8xxxx will be all free
  */
 phymem = malloc(memsize );
 rommemsize = memsize ;
 mem    = phymem + 0x38*0x2000;
 mmu = &mem[0xffa0];
 prog = (char*)mem;
 if (romstart==0x8000) {
     romstart = memsize ;  // full 512kb mem
 }
 fread(mem+  0xe000,len,1,image);
 mem[0xff90] = 0;
 mem[0xffa7] = 0x3f;
#else
 if (romstart==0x8000) {
     romstart = 0x10000 - len; 
 }
 fread(mem+(romstart&0xffff),len,1,image);
#endif
 fclose(image);
}

void usage(void)
{
 fprintf(stderr,"Usage: v09 [-rom rom-image] [-l romstart] [-t tracefile [-tl addr] [-nt]"
           "[-[01] disk-image ] "
#ifdef USE_VDISK
           "[v vdisk-base-dir ] "
#endif
                "[-th addr] ]\n[-e escchar] \n");
 exit(1); 
}


#define CHECKARG if(i==argc)usage();else i++;

int
main(int argc,char *argv[])
{
 char *imagename=0;
 int i;
 int setterm = 1;
 timerirq = 2;   // use FIRQ default
#ifdef USE_MMU
 memsize = 512*1024*4;      // full 2 mbute
#else
 memsize = 1024*64;         // 64k
#endif
 escchar='\x1d'; 
 tracelo=0;tracehi=0xffff;
 for(i=1;i<argc;i++) {
    if (strcmp(argv[i],"-t")==0) {
     i++;
     if((tracefile=fopen(argv[i],"w"))==NULL) {
         perror("v09, tracefile");
         exit(2);
     }
     tracing=1;attention=1;    
   } else if (strcmp(argv[i],"-rom")==0) {
     i++;
     timer = 3;         // non standard rom image, don't start timer, and timder start call enabled
     timerirq = 1 ;     // os9 cannot handle FIRQ
     romfile = argv[i];

   } else if (strcmp(argv[i],"-0")==0) {
      i++;
      disk[0] = fopen(argv[i],"r+");
   } else if (strcmp(argv[i],"-1")==0) {
      i++;
      disk[1] = fopen(argv[i],"r+");
#ifdef USE_VDISK
   } else if (strcmp(argv[i],"-v")==0) {
      i++;
      setVdisk(0,argv[i]);
#endif
   } else if (strcmp(argv[i],"-tl")==0) {
     i++;
     tracelo=strtol(argv[i],(char**)0,0);
   } else if (strcmp(argv[i],"-th")==0) {
     i++;
     tracehi=strtol(argv[i],(char**)0,0);
   } else if (strcmp(argv[i],"-e")==0) {
     i++;
     escchar=strtol(argv[i],(char**)0,0);
   } else if (strcmp(argv[i],"-l")==0) {
     i++;
     romstart=strtol(argv[i],(char**)0,0);
   } else if (strcmp(argv[i],"-nt")==0) {  // start debugger at the start
     attention = escape = 1;
     timer = 1;   // desable default  timer interrupt and don't start timer on timer start IO 
   } else if (strcmp(argv[i],"-m")==0) {
     i++;
     memsize=strtol(argv[i],(char**)0,0) & ~0xffff;
#ifdef USE_MMU
     if (memsize < 512*1024) memsize = 512*1024;
#endif
   } else usage();
 }   
 #ifdef MSDOS
 if((mem=farmalloc(65535))==0) { 
   fprintf(stderr,"Not enough memory\n");
   exit(2);
 } 
 #endif
 read_image(); 
 init_term();
 if (setterm) set_term(escchar);
 pcreg=(mem[0xfffe]<<8)+mem[0xffff]; 
 prog = (char*)mem;  // for disasm
 interpr();
 return 0;
}