--- a/libcpp/po/zh_TW.po	Thu Sep 24 13:21:57 2009 +0900
+++ b/libcpp/po/zh_TW.po	Tue Dec 22 21:19:31 2009 +0900
@@ -8,7 +8,7 @@
 msgstr ""
 "Project-Id-Version: cpplib 4.1.0\n"
 "Report-Msgid-Bugs-To: http://gcc.gnu.org/bugs.html\n"
-"POT-Creation-Date: 2008-11-18 20:02+0000\n"
+"POT-Creation-Date: 2009-04-22 16:32+0000\n"
 "PO-Revision-Date: 2006-03-09 12:37+0800\n"
 "Last-Translator: Wei-Lun Chao <chaoweilun@pcmail.com.tw>\n"
 "Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
@@ -73,7 +73,7 @@
 msgid "%.*s is not a valid universal character"
 msgstr "%.*s 不是一個有效的萬國碼字元"
 
-#: charset.c:1039 lex.c:485
+#: charset.c:1039 lex.c:486
 msgid "'$' in identifier or number"
 msgstr "「$」出現在識別字或數字中"
 
@@ -390,7 +390,7 @@
 msgid "unterminated #%s"
 msgstr "未終止的 #%s"
 
-#: directives-only.c:222 lex.c:1138 traditional.c:162
+#: directives-only.c:222 lex.c:1149 traditional.c:163
 msgid "unterminated comment"
 msgstr "未終結的註釋"
 
@@ -415,205 +415,205 @@
 msgid "%s: %s"
 msgstr "%s：%s"
 
-#: expr.c:262
+#: expr.c:261
 msgid "too many decimal points in number"
 msgstr "數字中有太多小數點"
 
-#: expr.c:291 expr.c:366
+#: expr.c:290 expr.c:365
 #, fuzzy
 msgid "fixed-point constants are a GCC extension"
 msgstr "虛數常數是一個 GCC 擴充功能"
 
-#: expr.c:304
+#: expr.c:303
 #, fuzzy, c-format
 msgid "invalid digit \"%c\" in binary constant"
 msgstr "八進位常數中有無效字元「%c」"
 
-#: expr.c:306
+#: expr.c:305
 #, c-format
 msgid "invalid digit \"%c\" in octal constant"
 msgstr "八進位常數中有無效字元「%c」"
 
-#: expr.c:314
+#: expr.c:313
 #, fuzzy
 msgid "invalid prefix \"0b\" for floating constant"
 msgstr "浮點常數的「%.*s」字尾無效"
 
-#: expr.c:320
+#: expr.c:319
 msgid "use of C99 hexadecimal floating constant"
 msgstr "使用 C99 式的十六進位浮點常數"
 
-#: expr.c:329
+#: expr.c:328
 msgid "exponent has no digits"
 msgstr "指數部分沒有數字"
 
-#: expr.c:336
+#: expr.c:335
 msgid "hexadecimal floating constants require an exponent"
 msgstr "十六進位浮點常數需要指數部分"
 
-#: expr.c:342
+#: expr.c:341
 #, c-format
 msgid "invalid suffix \"%.*s\" on floating constant"
 msgstr "浮點常數的「%.*s」字尾無效"
 
-#: expr.c:352 expr.c:394
+#: expr.c:351 expr.c:393
 #, c-format
 msgid "traditional C rejects the \"%.*s\" suffix"
 msgstr "傳統 C 不接受「%.*s」字尾"
 
-#: expr.c:359
+#: expr.c:358
 #, fuzzy, c-format
 msgid "invalid suffix \"%.*s\" with hexadecimal floating constant"
 msgstr "浮點常數的「%.*s」字尾無效"
 
-#: expr.c:370
+#: expr.c:369
 #, fuzzy
 msgid "decimal float constants are a GCC extension"
 msgstr "虛數常數是一個 GCC 擴充功能"
 
-#: expr.c:380
+#: expr.c:379
 #, c-format
 msgid "invalid suffix \"%.*s\" on integer constant"
 msgstr "整數常數的「%.*s」字尾無效"
 
-#: expr.c:402
+#: expr.c:401
 msgid "use of C99 long long integer constant"
 msgstr "使用 C99 long long 整數常數"
 
-#: expr.c:410
+#: expr.c:409
 msgid "imaginary constants are a GCC extension"
 msgstr "虛數常數是一個 GCC 擴充功能"
 
-#: expr.c:413
+#: expr.c:412
 #, fuzzy
 msgid "binary constants are a GCC extension"
 msgstr "虛數常數是一個 GCC 擴充功能"
 
-#: expr.c:506
+#: expr.c:505
 msgid "integer constant is too large for its type"
 msgstr "整數常數值超出其類型"
 
-#: expr.c:518
+#: expr.c:517
 msgid "integer constant is so large that it is unsigned"
 msgstr "整數常數太大，認定為 unsigned"
 
-#: expr.c:613
+#: expr.c:612
 msgid "missing ')' after \"defined\""
 msgstr "「defined」 後缺少「)」"
 
-#: expr.c:620
+#: expr.c:619
 msgid "operator \"defined\" requires an identifier"
 msgstr "運算子「defined」需要一個識別字"
 
-#: expr.c:628
+#: expr.c:627
 #, c-format
 msgid "(\"%s\" is an alternative token for \"%s\" in C++)"
 msgstr "(在 C++ 中「%s」會是「%s」的替代識別字)"
 
-#: expr.c:638
+#: expr.c:637
 msgid "this use of \"defined\" may not be portable"
 msgstr "使用「defined」可能不利於移植"
 
-#: expr.c:691
+#: expr.c:690
 msgid "floating constant in preprocessor expression"
 msgstr "浮點常數出現在預先處理運算式中"
 
-#: expr.c:697
+#: expr.c:696
 msgid "imaginary number in preprocessor expression"
 msgstr "預先處理運算式中出現虛數"
 
-#: expr.c:744
+#: expr.c:743
 #, c-format
 msgid "\"%s\" is not defined"
 msgstr "「%s」未定義"
 
-#: expr.c:756
+#: expr.c:755
 #, fuzzy
 msgid "assertions are a GCC extension"
 msgstr "#%s 是 GCC 擴充功能"
 
-#: expr.c:759
+#: expr.c:758
 msgid "assertions are a deprecated extension"
 msgstr ""
 
-#: expr.c:892 expr.c:921
+#: expr.c:891 expr.c:920
 #, c-format
 msgid "missing binary operator before token \"%s\""
 msgstr "識別字「%s」前缺少二元運算子"
 
-#: expr.c:912
+#: expr.c:911
 #, c-format
 msgid "token \"%s\" is not valid in preprocessor expressions"
 msgstr "識別字「%s」在預先處理運算式中無效"
 
-#: expr.c:929
+#: expr.c:928
 msgid "missing expression between '(' and ')'"
 msgstr "「(」與「)」之間缺少運算式"
 
-#: expr.c:932
+#: expr.c:931
 #, fuzzy, c-format
 msgid "%s with no expression"
 msgstr "#if 後沒有運算式"
 
-#: expr.c:935
+#: expr.c:934
 #, c-format
 msgid "operator '%s' has no right operand"
 msgstr "運算子「%s」沒有右運算元"
 
-#: expr.c:940
+#: expr.c:939
 #, c-format
 msgid "operator '%s' has no left operand"
 msgstr "運算子「%s」沒有左運算元"
 
-#: expr.c:966
+#: expr.c:965
 msgid " ':' without preceding '?'"
 msgstr "「:」前沒有「?」"
 
-#: expr.c:994
+#: expr.c:993
 #, fuzzy, c-format
 msgid "unbalanced stack in %s"
 msgstr "#if 中不平衡的堆疊"
 
-#: expr.c:1014
+#: expr.c:1013
 #, c-format
 msgid "impossible operator '%u'"
 msgstr "不可能的運算子「%u」"
 
-#: expr.c:1115
+#: expr.c:1114
 msgid "missing ')' in expression"
 msgstr "運算式中缺少「)」"
 
-#: expr.c:1144
+#: expr.c:1143
 msgid "'?' without following ':'"
 msgstr "「?」後沒有「:」"
 
-#: expr.c:1154
+#: expr.c:1153
 msgid "integer overflow in preprocessor expression"
 msgstr "預先處理運算式中整數溢出"
 
-#: expr.c:1159
+#: expr.c:1158
 msgid "missing '(' in expression"
 msgstr "運算式中缺少「(」"
 
-#: expr.c:1191
+#: expr.c:1190
 #, c-format
 msgid "the left operand of \"%s\" changes sign when promoted"
 msgstr "「%s」的左運算元在提升時變換了符號"
 
-#: expr.c:1196
+#: expr.c:1195
 #, c-format
 msgid "the right operand of \"%s\" changes sign when promoted"
 msgstr "「%s」的右運算元在提升時變換了符號"
 
-#: expr.c:1455
+#: expr.c:1454
 msgid "traditional C rejects the unary plus operator"
 msgstr "傳統 C 不接受單元 + 運算子"
 
-#: expr.c:1538
+#: expr.c:1537
 msgid "comma operator in operand of #if"
 msgstr "#if 運算元中出現逗號"
 
-#: expr.c:1670
+#: expr.c:1669
 msgid "division by zero in #if"
 msgstr "#if 中用零做除數"
 
@@ -653,112 +653,112 @@
 msgid "Multiple include guards may be useful for:\n"
 msgstr "多個防止重包含可能對其有用：\n"
 
-#: init.c:451
+#: init.c:452
 msgid "cppchar_t must be an unsigned type"
 msgstr "cppchar_t 必須是無號類型"
 
-#: init.c:455
+#: init.c:456
 #, c-format
 msgid "preprocessor arithmetic has maximum precision of %lu bits; target requires %lu bits"
 msgstr "預先處理算術的最高精度為 %lu 位；目標需要 %lu 位"
 
-#: init.c:462
+#: init.c:463
 msgid "CPP arithmetic must be at least as precise as a target int"
 msgstr "CPP 算術必須至少具有目標 int 的精度"
 
-#: init.c:465
+#: init.c:466
 msgid "target char is less than 8 bits wide"
 msgstr "目標 char 短於 8 位"
 
-#: init.c:469
+#: init.c:470
 msgid "target wchar_t is narrower than target char"
 msgstr "目標 wchar_t 短於目標 char"
 
-#: init.c:473
+#: init.c:474
 msgid "target int is narrower than target char"
 msgstr "目標 int 短於目標 char"
 
-#: init.c:478
+#: init.c:479
 msgid "CPP half-integer narrower than CPP character"
 msgstr "CPP 半整數短於 CPP 字元"
 
-#: init.c:482
+#: init.c:483
 #, c-format
 msgid "CPP on this host cannot handle wide character constants over %lu bits, but the target requires %lu bits"
 msgstr "在此宿主機上，CPP 不能處理長於 %lu 位的寬字元常數，但目標需要 %lu 位"
 
-#: lex.c:284
+#: lex.c:285
 msgid "backslash and newline separated by space"
 msgstr "反斜線和換列為空格所分隔"
 
-#: lex.c:289
+#: lex.c:290
 msgid "backslash-newline at end of file"
 msgstr "反斜線-換列出現在檔案末尾"
 
-#: lex.c:304
+#: lex.c:305
 #, c-format
 msgid "trigraph ??%c converted to %c"
 msgstr "三元符 ??%c 轉換為 %c"
 
-#: lex.c:311
+#: lex.c:312
 #, c-format
 msgid "trigraph ??%c ignored, use -trigraphs to enable"
 msgstr "三元符 ??%c 被忽略，請使用 -trigraphs 來啟用"
 
-#: lex.c:357
+#: lex.c:358
 msgid "\"/*\" within comment"
 msgstr "「/*」出現在註釋中"
 
-#: lex.c:415
+#: lex.c:416
 #, c-format
 msgid "%s in preprocessing directive"
 msgstr "預先處理指令中出現 %s"
 
-#: lex.c:424
+#: lex.c:425
 msgid "null character(s) ignored"
 msgstr "忽略空字元"
 
-#: lex.c:461
+#: lex.c:462
 #, c-format
 msgid "`%.*s' is not in NFKC"
 msgstr "「%.*s」不在 NFKC 中"
 
-#: lex.c:464
+#: lex.c:465
 #, c-format
 msgid "`%.*s' is not in NFC"
 msgstr "「%.*s」不在 NFC 中"
 
-#: lex.c:552
+#: lex.c:553
 #, c-format
 msgid "attempt to use poisoned \"%s\""
 msgstr "試圖使用已加料的「%s」"
 
-#: lex.c:560
+#: lex.c:561
 msgid "__VA_ARGS__ can only appear in the expansion of a C99 variadic macro"
 msgstr "__VA_ARGS__ 只能出現在 C99 可變參數巨集的展開中"
 
-#: lex.c:664
+#: lex.c:675
 msgid "null character(s) preserved in literal"
 msgstr "空字元將保留在原文中"
 
-#: lex.c:667
+#: lex.c:678
 #, fuzzy, c-format
 msgid "missing terminating %c character"
 msgstr "缺少結尾的 > 字元"
 
-#: lex.c:1149
+#: lex.c:1160
 msgid "C++ style comments are not allowed in ISO C90"
 msgstr "C++ 風格的註釋在 ISO C90 中不被允許"
 
-#: lex.c:1151
+#: lex.c:1162
 msgid "(this will be reported only once per input file)"
 msgstr "(此警告為每個輸入檔案只報告一次)"
 
-#: lex.c:1156
+#: lex.c:1167
 msgid "multi-line comment"
 msgstr "多列註釋"
 
-#: lex.c:1469
+#: lex.c:1481
 #, c-format
 msgid "unspellable token %s"
 msgstr "無法拼出的識別字 %s"
@@ -823,7 +823,7 @@
 msgid "macro \"%s\" passed %u arguments, but takes just %u"
 msgstr "巨集「%s」傳遞了 %u 個引數，但只需要 %u 個"
 
-#: macro.c:731 traditional.c:680
+#: macro.c:731 traditional.c:681
 #, c-format
 msgid "unterminated argument list invoking macro \"%s\""
 msgstr "呼叫巨集「%s」時引數清單未終止"
@@ -838,67 +838,67 @@
 msgid "invoking macro %s argument %d: empty macro arguments are undefined in ISO C90 and ISO C++98"
 msgstr ""
 
-#: macro.c:1453
+#: macro.c:1479
 #, c-format
 msgid "duplicate macro parameter \"%s\""
 msgstr "重複的巨集參數「%s」"
 
-#: macro.c:1499
+#: macro.c:1525
 #, c-format
 msgid "\"%s\" may not appear in macro parameter list"
 msgstr "「%s」不能出現在巨集參數清單中"
 
-#: macro.c:1507
+#: macro.c:1533
 msgid "macro parameters must be comma-separated"
 msgstr "巨集參數必須由逗號隔開"
 
-#: macro.c:1524
+#: macro.c:1550
 msgid "parameter name missing"
 msgstr "缺少參數名"
 
-#: macro.c:1541
+#: macro.c:1567
 msgid "anonymous variadic macros were introduced in C99"
 msgstr "匿名可變參數巨集在 C99 中被引入"
 
-#: macro.c:1546
+#: macro.c:1572
 msgid "ISO C does not permit named variadic macros"
 msgstr "ISO C 不允許具名的可變參數巨集"
 
-#: macro.c:1555
+#: macro.c:1581
 msgid "missing ')' in macro parameter list"
 msgstr "在巨集參數表中缺少「)」"
 
-#: macro.c:1604
+#: macro.c:1630
 msgid "'##' cannot appear at either end of a macro expansion"
 msgstr "「##」不能出現在巨集展開的兩端"
 
-#: macro.c:1638
+#: macro.c:1664
 msgid "ISO C99 requires whitespace after the macro name"
 msgstr "ISO C99 要求巨集名後必須有空白"
 
-#: macro.c:1662
+#: macro.c:1688
 msgid "missing whitespace after the macro name"
 msgstr "巨集名後缺少空白"
 
-#: macro.c:1692
+#: macro.c:1718
 msgid "'#' is not followed by a macro parameter"
 msgstr "「#」後沒有巨集參數"
 
-#: macro.c:1811
+#: macro.c:1837
 #, c-format
 msgid "\"%s\" redefined"
 msgstr "「%s」重定義"
 
-#: macro.c:1816
+#: macro.c:1842
 msgid "this is the location of the previous definition"
 msgstr "這是先前定義的位置"
 
-#: macro.c:1877
+#: macro.c:1903
 #, c-format
 msgid "macro argument \"%s\" would be stringified in traditional C"
 msgstr "巨集引數「%s」將在傳統 C 中被字串化"
 
-#: macro.c:1900
+#: macro.c:1926
 #, c-format
 msgid "invalid hash type %d in cpp_macro_definition"
 msgstr "cpp_macro_definition 中有無效的雜湊類型 %d"
@@ -907,36 +907,41 @@
 msgid "while writing precompiled header"
 msgstr "在寫入預先編譯標頭時"
 
-#: pch.c:485
+#: pch.c:484
+#, fuzzy, c-format
+msgid "%s: not used because `%.*s' is poisoned"
+msgstr "%s：未使用，因為「%s」已定義"
+
+#: pch.c:506
 #, c-format
 msgid "%s: not used because `%.*s' not defined"
 msgstr "%s：未使用，因為「%.*s」未定義"
 
-#: pch.c:497
+#: pch.c:518
 #, c-format
 msgid "%s: not used because `%.*s' defined as `%s' not `%.*s'"
 msgstr "%s：未使用，因為「%.*s」被定義為「%s」而非「%*.s」"
 
-#: pch.c:538
+#: pch.c:559
 #, c-format
 msgid "%s: not used because `%s' is defined"
 msgstr "%s：未使用，因為「%s」已定義"
 
-#: pch.c:558
+#: pch.c:579
 #, fuzzy, c-format
 msgid "%s: not used because `__COUNTER__' is invalid"
 msgstr "%s：未使用，因為「%s」已定義"
 
-#: pch.c:567 pch.c:737
+#: pch.c:588 pch.c:758
 msgid "while reading precompiled header"
 msgstr "在讀取預先編譯標頭時"
 
-#: traditional.c:750
+#: traditional.c:751
 #, c-format
 msgid "detected recursion whilst expanding macro \"%s\""
 msgstr "展開巨集「%s」時偵測到遞迴"
 
-#: traditional.c:968
+#: traditional.c:969
 msgid "syntax error in macro parameter list"
 msgstr "巨集參數清單語法錯誤"